Debugovaci mako

Snaha o zprehledneni kodu.
Oprava pro preklad i pro ESP8266
2022-06-08 13:01:10 +02:00 · 2022-04-01 08:06:56 +02:00 · 2021-10-27 10:29:21 +02:00 · 2021-10-27 10:22:59 +02:00 · 2021-10-16 17:45:56 +02:00 · 2021-10-02 09:31:43 +02:00
7 changed files with 836 additions and 744 deletions
--- a/examples/WiFiConfig_simple_test/WiFiConfig_simple_test.ino
+++ b/examples/WiFiConfig_simple_test/WiFiConfig_simple_test.ino
@ -8,11 +8,8 @@
 #  include <NetBIOS.h>
 #endif
 #include <ArduinoOTA.h>
 #include <EEPROM.h>
 #include <WiFiConfig.h>
-#include <encipheredEEPROMStrings.h>
+#include <sysvars.hpp>
 #define EEPROM_MAGIC 0xdeadbeef
 // Plati pro desticku Witty s modulem ESP-12E
 #define PIN_FORCE_CONFIG 4
@ -20,34 +17,24 @@
 //#define DEBUG_OUT(a) {}
 #define DEBUG_OUT(a) Serial.print(a)
-// Definice obsazeni EEPROM
+char WiFiDeviceName[32]; // misto pro jmeno zarizeni (dodane do DNS, DHCP NBNS apod...)
 #define elementSize(type, element) sizeof(((type *)0)->element)
 #define countof(a) (sizeof(a) / sizeof(a[0]))
 typedef struct {
    uint32_t magic; // kontrola spravneho obsahu EEPROM
    char devname[32 + 2]; // jmeno zarizeni (pro NBNS plati jen 16 znaku)
 } eepromconfig_t;
 #define EEPROM_SIZE (sizeof(wificonfigarea_t) + sizeof(eepromconfig_t) + 10) // velikost EEPROM oblasti (POZOR!!! zbytecnym zvetsovanim se zaroven zmensuje velikost RAM kvuli zrcadlu!!!)
 #define EEPROM_WIFICONFIG_ORIGIN (EEPROM_SIZE - sizeof(wificonfigarea_t)) // pocatek oblasti, pouzivane WiFiConfig (alokovano odzadu)
 #define EEPROM_CONFIG_ORIGIN (0)
 char WiFiDeviceName[elementSize(eepromconfig_t, devname)]; // misto pro jmeno zarizeni (dodane do DNS, DHCP NBNS apod...)
 #if defined(ARDUINO_ARCH_ESP8266)
 ESP8266WebServer wwwserver(80); // webovy server
 #else
 WebServer wwwserver(80); // webovy server
 #endif
-String content;
+
 static char MAINPAGE[] PROGMEM = R"=====(<!DOCTYPE HTML>
 <html>
    Hello world from ESP8266
    <p>
 </html>
 )=====";
 static void handleRoot(void)
 {
-    content = F("<!DOCTYPE HTML>\n<html>Hello world from ESP8266");
+    wwwserver.send_P(200, "text/html", MAINPAGE);
    content += F("<p>");
    content += F("</html>");
    wwwserver.send(200, "text/html", content);
 }
 void ICACHE_FLASH_ATTR wcb(wificonfigstate_t state)
@ -82,7 +69,7 @@ void ICACHE_FLASH_ATTR saveDevname(const char *param)
 {
    String p = param;
-    EES_storeString(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, devname), elementSize(eepromconfig_t, devname), p);
+    svSetV(F("devname"), p);
 }
 void ICACHE_FLASH_ATTR setup()
@ -90,28 +77,16 @@ void ICACHE_FLASH_ATTR setup()
    WiFiConfig wifi; // konfigurace ESP modulu
    WiFiConfigUsrParameter devname("devname", "Jméno zařízení", (const char *)WiFiDeviceName, 32, saveDevname);
-    EEPROM.begin(EEPROM_SIZE); // zahajujeme praci s EEPROM
+    LittleFS.begin();
    uint32_t magic;
    EEPROM.get(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, magic), magic);
    if (EEPROM_MAGIC != magic) {
        // EEPROM ma spatny obsah
        for (unsigned int i = 0; i < EEPROM_SIZE; i++)
            EEPROM.write(i, 0);
        magic = EEPROM_MAGIC;
        EEPROM.put(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, magic), magic);
        EEPROM.commit();
    }
    pinMode(PIN_FORCE_CONFIG, INPUT_PULLUP); // pin, co slouzi jako vstup tlacitka
    int fc = digitalRead(PIN_FORCE_CONFIG); // pozadavek na vynucene vyvolani konfigurace
    Serial.begin(115200);
-    String dn = EES_readString(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, devname), elementSize(eepromconfig_t, devname));
+    String dn = svGetV<String>(F("devname"));
    strcpy(WiFiDeviceName, dn.c_str());
    wifi.addParameter(&devname);
-    if (WCR_OK != wifi.begin(EEPROM_WIFICONFIG_ORIGIN, fc, wcb)) // startujeme pripojeni
+    if (WCR_OK != wifi.begin(fc, wcb)) // startujeme pripojeni
        ESP.restart();
    wwwserver.on("/", handleRoot);
--- a/history.txt
+++ b/history.txt
@ -0,0 +1,91 @@
 /*
 * v7.0.0- 4.3.2021  - verze s konfiguraci v JSON na souborovem systemu
 *
 * v6.4.0- 27.2.2021 - funkcni inicializace konfigurace
 *
 * v6.3.5-28.11.2020 - moznost nadefinovat titulek webove stranky a popisek okna v prohlizeci pomoci WIFICONFIG_TITLE a WIFICONFIG_WEBTITLE
 *
 * v6.3.4-23.3.2020 - staticka konfigurace v AP rezimu funkcni
 *
 * v6.3.3-27.10.2019 - volani WS_CONNECTED i v pripade, ze bezi AP
 *
 * v6.3.2- 4.10.2019 - Informace o aplikaci a jeji verzi do footeru, zrychlen restart z 10 na 5 sekund, vylepsena stranka pro reset
 *                      verze pro ESP32 zobrazuje neco malo informaci o stavu pripojeni a duvodu vstupu do WifiConfig
 *
 * V6.3.1- 1.9.2019 - Odstraneni HTML5 validatoru - delaly akorat problemy a nedala se ulozit konfigurace i kdyz byly polozky skryty
 *
 * V6.3 - 12.8.2019 - IP adresa Captive portalu je zmenena na 172.217.28.1 kvuli funkcnosti na Android zarizenich (viz. zmena zde https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortal/CaptivePortal.ino)
 *             ladici vypis pri zachyceni presmerovani v Captive portalu.
 *
 * V6.2 - 12.12.2018- Nastaveni jmena zarizeni nadale NENI soucasti WiFiConfig a je treba ho pridat jako uzivatelsky parametr. Je to proto, protoze
 *             se ukazalo, ze neni dobre z externiho kodu sahat do vnitrni struktury WiFiConfig (napr. pri ukladani noveho jmena).
 *
 * V6.1 - 11.12.2018- Sifrovani retezcu vytazeno mimo WiFiConfig do knihovny encipheredEEPROMStrings (dostupna na gitu) kvuli pristupu i jinych modulu
 *
 * V6.0 - 20.11.2018- Verze i pro ESP32
 *
 * V5.9 - 18.7.2018 - Retezce, ukladane do EEPROM jsou primitivnim zpusobem sifrovany pro ztizeni odhaleni SSID a hesla pri dumpu pameti
 *
 * V5.8 - 5.7.2018 - Opraveno spatne zobrazovani sily signalu v prehledu WiFi siti (spatne barvy)
 *
 * V5.7 - 4.7.2018 - BugFix - staticka konfigurace ip adresy se neuplatnila - vypada to, jako kdyby SDK ukladalo SSID a Password, ale uz neuklada
 *            konfiguraci ip adres, takze je treba je vzdycky nastavit znovu
 *
 * V5.6 - 1.7.2018 - BugFix - odstraneno volani _plusDecode, protoze parametry jsou nyni predavany v 'ciste' forme uz z weboveho serveru a tato metoda znehodnotila retezce, ktere obsahovaly ynak '+'
 *
 * V5.5 - 3.6.2018 - Flash Chip ID a ESP Chip ID jsou zobrazeny hexadecimalne v prehledove strance
 *
 * V5.4 - 9.1.2018 - na titulni stranku pridan duvod, proc je spusteny konfiguracni AP. Usnadni to diagnostiku pripadu, kdy se ESP nechce pripojit k AP.
 *
 * V5.3 - 8.12.2017 - prepracovano presmerovani v Captive portalu, DEBUG_MSG makro upraveno na posledni pouzivanou verzi, scitani retezcu prepracovano na .concat. Pripsany Informace o modulu, reakce na Reset
 *
 * V5.2 - 20.4.2017 - Pokud je pouzite v timeoutu WC_DONT_RUN_CONFIGAP tak se vracime okamzite a necekame na pripojeni k WiFi (take nevolame zadnou callback metodu).
 *            Navratovy kod je pak WCR_CONFIGAP_NOT_STARTED .
 *
 * V5.1 - 3.4.2017  - Webove rozhrani upravene pro snadnejsi ovladani na telefonu/tabletu, sila signalu AP zobrazena jako barevne odliseny indikator.
 *
 * V5.0 - 29.10.2016- Vyuziti vlastnosti ESP, ktere si uklada wifi konfiguraci do sve vlastni flash oblasti, takze nemusim vse konfigurovat znovu po startu - doufam, ze se tim zrychli asociace s AP
 *            kvuli bateriove napajenym pristrojum.
 *
 * V4.7 - 30.8.2016 - Metody .begin se nyni vraci s wificonfigresult_t (podarilo se pripojit k AP, nepodarilo se pripojit a vyprsel timeout pro konfiguracni AP, nepodarilo se pripojit, ale je zakazane spousteni konfiguracniho AP).
 *            ESP NYNI NENI RESETOVAN PO VYPRSENI TIMEOUTU!!!! Je to kvuli bateriovym cidlum a DeepSleep rezimu v situaci, kdy zmizi AP, ke kteremu se bezne pripojujeme
 *            Odstraneno odesilani reakce na generate_204 (viz. https://github.com/tzapu/WiFiManager/issues/114)
 *            Zbytek MAC adresy v pripadnem SSID je nyni vzdy velkymi pismeny (UAA Unique Address Assignment)
 *            Kvalita signalu jednotlivych AP je nyni uvadena v % namisto uzivatelum nic nerikajicich -dBm
 *            Pokud do polozky timeout v .begin() metode zadame hodnotu WC_DONT_RUN_CONFIGAP, tak i po neuspesnem pokusu o pripojeni do site NENI spusteny konfiguracni AP (bateriove pristroje, stale bezici pristroje)
 *
 * V4.6 - 26.7.2016 - Moznost nastavit cislo kanalu pro rezim AP, nove eye-candy rozhrani.
 *
 * V4.5 - 20.7.2016 - Moznost konfigurovat cislo kanalu pro nastavovaci AP (default je 3), po nacteni konfiguracni stranky je nastaveny timeout na 6 minut, pokud je ve jmenu SSID pro konfiguracni
 *            AP znak ? (otaznik), tak je tento nahrazen HEXASCII reprezentaci 3 poslednich bytu MAC adresy AP (POZOR!!! je jina, nez STA!!!)
 *
 * V4.4 - 10.7.2016 - Zmena nazvu vsech privatnich metod (doplnene uvodni podtrzitko _). Pokud tam nebylo, tak napriklad nesel prelozit skript s handleNotFound pokud nebyl dopredne deklarovany (asi zmatek v Arduino preprocesoru)
 *
 * V4.3 - 23.6.2016 - Kazde nacteni webove stranky prodluzuje pripadny timeout pro restart zarizeni.
 *
 * V4.2 - 10.6.2016 - DNSServer a WebServer ukazatele jsou nyni staticke primo v modulu WiFiConfig. Predchozi verze neumoznila soucasne pouziti s knihovnami ESPAsyncWebServer z duvodu kolize nekterych definic HTTP metod
 *
 * V4.1 - 18.5.2016 - Nenechame SDK ukladat WiFi konfiguraci do Flash (setrime prepisy)
 *
 * V4.0 - 10.4.2016 - pridana moznost staticke konfigurace ip parametru. POZOR!!!! ukladani dat do EEPROM (verejne funkce) nyni nevolaji automaticky commit() kvuli snizeni poctu prepisu Flash EEPROM
 *            pridana moznost timeoutu pro konfiguracni AP. Pokud timeout vyprsi, tak se zarizeni automaticky restartuje, coz vyvola novy pokus o pripojeni.
 *
 * V3.0 - 27.2.2016 - pridana presmerovavaci stranka kvuli Captive portalu, doplneno servirovani favicon.ico, doplnena moznost zadavani uzivatelskych parametru, www server a DNS server jsou dynamicky vytvareny
 *
 * V2.4 - 7.2.2016  - upraveno casovani pri pripojovani k AP (zmizel delay(100))
 *
 * V2.3 - 5.2.2016  - pridano zverejneni jmena hosta a nastaveni tohoto jmena pro DHCP apod.
 *
 * V2.2 - 19.1.2016 - pridan Captive portal pri konfiguracnim AP.
 *
 * V2.1 - 20.9.2015 - pridano zadavani jmena zarizeni. Modul ho sice nevyuziva, ale aplikace ano a v pripade DHCP se dost hodi.
 *
 * V2.0 - 30.8.2015 - Podstatnym zpusobem vylepsena signalizace vnitrniho stavu, presunuto ulozeni rezimu (commit je uz zbytecny - udela se pri ukladani retezcu - uspora kodu/setreni prepisu pameti Flash)
 *
 * V1.2 - 23.8.2015 - BugFix - pridan chybejici eeprom.commit() po ulozeni rezimu prace
 *
 * V1.1 - 5.8.2015 - pridana moznost volani callback metody pri behu konfiguracniho AP (signalizace stavu uzivatelskym zpusobem)
 *
 * V1.0 - publikace na www.xpablo.cz
 *
 */
--- a/library.json
+++ b/library.json
@ -10,13 +10,24 @@
  "repository":
  {
    "type": "git",
-    "url": "http://git.xpablo.cz/pablo2048/WiFiConfig.git"
+    "url": "https://git.xpablo.cz/pablo2048/WiFiConfig.git"
  },
-  "version": "6.3.4",
+  "dependencies": [
    {
      "name":"encString",
      "version":"https://git.xpablo.cz/xPablo.cz/encString.git"
    },
    {
      "name":"sysvars",
      "version":"https://git.xpablo.cz/xPablo.cz/sysvars.git"
    }
  ],
  "version": "7.0.0",
  "license": "MIT",
  "frameworks": "arduino",
  "platforms": ["espressif8266", "espressif32"],
  "build": {
-    "libCompatMode": 2
+    "libCompatMode": 2,
    "libLDFMode": "deep"
  }
 }
--- a/library.properties
+++ b/library.properties
@ -1,9 +1,9 @@
 name=WiFiConfig
-version=6.3.4
+version=7.0.0
 author=Pavel Brychta
-maintainer=Pavel Brychta <Pablo@xpablo.cz>
+maintainer=Pavel Brychta <pablo@xpablo.cz>
 sentence=Enables seamless module configuration.
 paragraph=With this library you can enable your ESP8266 or ESP32 module to be configured over WiFi. Includes Captive Portal for easy configuration.
 category=Other
-url=http://www.xpablo.cz
+url=https://www.xpablo.cz
 architectures=esp8266,esp32
--- a/src/WiFiConfig.cpp
+++ b/src/WiFiConfig.cpp
--- a/src/WiFiConfig.h
+++ b/src/WiFiConfig.h
@ -2,7 +2,7 @@
 * @file WiFiConfig.h
 * @author Pavel Brychta, http://www.xpablo.cz
 *
- * Copyright (c) 2015-20 Pavel Brychta. All rights reserved.
+ * Copyright (c) 2015-21 Pavel Brychta. All rights reserved.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
@ -31,28 +31,26 @@
 #define __WiFiConfig_h__
 #if defined(ESP8266)
-#include <ESP8266WiFi.h>
+# include <ESP8266WiFi.h>
 #else
-#include <WiFi.h>
+# include <WiFi.h>
 #endif
 #include <memory>
 #include <ESPAsyncWebServer.h>
 #include <DNSServer.h>
-#define elementSize(type, element) sizeof(((type *)0)->element)
+#if TEMPLATE_PLACEHOLDER != '$'
 # error 'Need to redefine TEPLATE_PLACEHOLDER to $ sign'
 #endif
 #define WC_DONT_RUN_CONFIGAP -1 // priznak, ze si neprejeme spoustet konfiguracni AP (uziva se misto parametru timeout). Urceno pro bateriove napajene pristroje
-// Struktura konfigurace, ulozena v EEPROM
+#if not defined(WIFICFG_FILE)
-typedef struct {
+# define WIFICFG_FILE "/wifi.json"
-    uint8_t mode; // rezim prace AP/STA
+#endif
-    uint8_t ip; // konfigurace ip (staticka/DHCP)
+#if not defined(WIFICFG_OLD_FILE)
-    char ssid[32 + 2]; // SSID site
+# define WIFICFG_OLD_FILE "/wifi.old"
-    char pass[64 + 2]; // heslo
+#endif
    uint32_t ipaddr; // ip adresa v pripade staticke konfigurace
    uint32_t netmask; // sitova maska v pripade staticke konfigurace
    uint32_t gateway; // sitova brana v pripade staticke konfigurace
    uint32_t dns; // ip adresa DNS serveru v pripade staticke konfigurace
    uint8_t apchannel; // kanal, na kterem pracuje AP (pokud je zapnuty rezim AP)
 } wificonfigarea_t;
 // Parametr, predany uzivatelske callback funkci, urceny pro aplikacni vizualizaci stavu konfigurace a pripojeni
 typedef enum {
@ -71,6 +69,19 @@ typedef enum {
    WCR_CONFIGAP_NOT_STARTED = 2, // wifi neni pripojena a spusteni konfiguracniho AP bylo zakazane parametrem timeout (WC_DONT_RUN_CONFIGAP)
 } wificonfigresult_t;
 // Interni reprezentace konfigurace WiFi
 enum {
    WIFIMODE_AP = WIFI_AP, // rezim prace jako pristupovy bod (AP)
    WIFIMODE_STA = WIFI_STA, // rezim prace jako klient
    WIFIMODE_AP_STA = WIFI_AP_STA // rezim prace jako klient i pristupovy bod
 };
 // Interni reprezentace konfigurace ip
 enum {
    IPCONFIG_DHCP = 0x55, // DHCP konfigurace ip adres (default)
    IPCONFIG_STATIC = 0xaa // staticka konfigurace ip adres
 };
 typedef void (*wificonfig_cb)(wificonfigstate_t state); // definice callbacku
 typedef void (*storeparam_cb)(const char *newvalue); // callback pro ulozeni uzivatelskeho parametru
@ -87,24 +98,6 @@ typedef void (*storeparam_cb)(const char *newvalue); // callback pro ulozeni uzi
 # define SETUP_CHANNEL 3
 #endif
 /**
 *  \brief Ziskani retezce z EEPROM ze zadaneho offsetu
 *
 *  \param [in] start Ofset zacatku retezce
 *  \param [in] len Delka retezce
 *  \return Vycteny retezec
 */
 String getEEPROMString(unsigned int start, size_t len);
 /**
 *  \brief Ulozeni retezce do EEPROM
 *
 *  \param [in] start Ofset zacatku ukladani
 *  \param [in] len Maximalni delka ulozeneho retezce
 *  \param [in] string Ukladany retezec
 */
 void setEEPROMString(unsigned int start, size_t len, String &string);
 /**
 *  \brief Ziskani nasi ip adresy
 *
@ -122,23 +115,6 @@ IPAddress getOurIP(void);
 */
 uint8_t * getOurMAC(uint8_t *mac);
 /**
 * @brief      Ziskani 32 bitoveho cisla z EEPROM
 *
 * @param[in]  start  Pocatecni adresa, ze ktere se ziskava cislo.
 *
 * @return     Ziskane cislo.
 */
 uint32_t getEEPROMuint32(int start);
 /**
 * @brief      Ulozeni 32 bitoveho cisla do EEPROM
 *
 * @param[in]  start  Pocatecni adresa, kam cislo ukladame.
 * @param[in]  val    Ukladana hodnota
 */
 void setEEPROMuint32(int start, uint32_t val);
 class WiFiConfigUsrParameter
 {
 public:
@ -158,34 +134,45 @@ private:
    int         _length;
    storeparam_cb _cb;
-    WiFiConfigUsrParameter *_next;
+    WiFiConfigUsrParameter *_next = nullptr;
    friend class WiFiConfig;
 };
 class WiFiConfig
 {
 public:
-    WiFiConfig(): _params(NULL), _timeout(0) {}
+    WiFiConfig()
-    wificonfigresult_t begin(int configarea, int forceConfigure, wificonfig_cb cb);
+        : _params(nullptr)
-    wificonfigresult_t begin(int configarea, int forceConfigure, int timeout, wificonfig_cb cb);
+        , _timeout(0) 
    {}
    wificonfigresult_t begin(int forceConfigure, wificonfig_cb cb);
    wificonfigresult_t begin(int forceConfigure, int timeout, wificonfig_cb cb);
    void addParameter(WiFiConfigUsrParameter *p);
    void initConfig(const String &ssid, const String &pass, const int mode = WIFIMODE_STA, const int ipcfg = IPCONFIG_DHCP, const IPAddress &ip = (uint32_t)0, const IPAddress &mask = (uint32_t)0, const IPAddress &gw = (uint32_t)0, const IPAddress &dns = (uint32_t)0);
 private:
    AsyncWebServer *server;
    std::unique_ptr<DNSServer> dnsServer;
    void _prepareWifi(void);
    wificonfigresult_t _setupAP(wificonfig_cb cb);
-    void _handleDisplayAP(void);
+    void _handleDisplayAP(AsyncWebServerRequest *request);
-    void _handleSetAP(void);
+    void _handleSetAP(AsyncWebServerRequest *request);
-    void _handleInfo(void);
+    void _handleInfo(AsyncWebServerRequest *request);
-    void _handleReset(void);
+    void _handleReset(AsyncWebServerRequest *request);
-    void _handleNotFound(); // CaptivePortal redirector
+    void _handleNotFound(AsyncWebServerRequest *request); // CaptivePortal redirector
-    void _handleRoot(); // jen jednoducha stranka kvuli CaptivePortalu umoznuje prejit na spravnou stranku (ale nedela to...)
+    void _handleRoot(AsyncWebServerRequest *request); // jen jednoducha stranka kvuli CaptivePortalu umoznuje prejit na spravnou stranku (ale nedela to...)
    void _handleScan(AsyncWebServerRequest *request);
    void _handleRestore(AsyncWebServerRequest *request);
    bool _testWifi(wificonfig_cb cb);
    bool _storeString(unsigned int start, size_t maxlen, String &string); // sifrovany retezec, max 255 znaku
    String _readString(unsigned int start, size_t maxlen); // sifrovany retezec, max. 255 znaku
    WiFiConfigUsrParameter *_searchUsrParameter(const char *name);
    IPAddress _getIP(const String &from);
    String rootProcessor(const String &var);
    String apProcessor(const String &var);
    String infoProcessor(const String & var);
    WiFiConfigUsrParameter *_params; // ukazatel na posledni zadany uzivatelsky parametr
    int _timeout; // timeout pri cekani na konfiguraci
    uint32_t _time; // hodnota, po ktere bude ESP restartovano (pokud je _timeout != 0)
    uint8_t _status; // stav pripojeni - je pouzity pro signalizaci duvodu, proc se nepripoji k AP
 };
 #endif
--- a/src/embHTML.h
+++ b/src/embHTML.h
@ -1,10 +1,19 @@
 // HTML data
 #ifndef WIFICONFIG_WEBTITLE
 #  define WIFICONFIG_WEBTITLE "xPablo.cz Setup"
 #endif
 #ifndef WIFICONFIG_TITLE
 # define WIFICONFIG_TITLE "ESP WiFiConfig"
 #endif
 static const char TEXTHTML[] PROGMEM = "text/html";
 static const char TEXTPLAIN[] PROGMEM = "text/plain";
 static const char TEXTJSON[] PROGMEM = "text/json";
-static const char PAGE_INDEX1[] PROGMEM = R"=====(
+static const char PAGE_INDEX1[] PROGMEM = R"=====(<!DOCTYPE html>
-<!DOCTYPE html><html lang="en"><head><meta charset= "utf-8"><meta name="viewport" content="width=device-width, initial-scale=1, user-scalable=no">
+<html lang="en"><head><meta charset= "utf-8"><meta name="viewport" content="width=device-width, initial-scale=1, user-scalable=no">
-<title>xPablo.cz Setup</title>
+<title>)=====" WIFICONFIG_WEBTITLE R"=====(</title>
 <style>
 .c{text-align: center;}
 div,input{padding:5px;font-size:1em;}
@ -21,66 +30,64 @@ function c(l){document.getElementById('_s').value=l.innerText||l.textContent;doc
 function hAP(){if (document.getElementById('_a').checked){document.getElementById('apconfig').style.display = 'block';}else{document.getElementById('apconfig').style.display = 'none';}}
 function hSC(){if (document.getElementById('_st').checked){document.getElementById('staticip').style.display = 'block';}else{document.getElementById('staticip').style.display = 'none';}}
 </script>
-</head><body><h1>ESP WiFiConfig</h1><div style='text-align:left;display:inline-block;min-width:260px;'>
+</head><body><h1>)=====" WIFICONFIG_TITLE R"=====(</h1><div style='text-align:left;display:inline-block;min-width:260px;'>
-)=====";
+<div id="ssids">
-
+</div>
 /* Polozky nalezenych SSID
 {v} - SSID
 {a} - RSSI (%)
 {s} - bud nic, nebo 'l'>
 Rozsahy otestovany zde https://css-tricks.com/html5-meter-element/
 */
 static const char SSID_ITEM[] PROGMEM = R"=====(
 <div><a href='#p' onclick='c(this)'>{v}</a>&nbsp;<span class='q {s}'><meter value="{a}" min="0" low="30" optimum="70" high="60" max="100" style="width: 70%;"></meter></span></div>
 )=====";
 /* Zacatek formulare pro vyplneni
 {s} - SSID
 {p} - password
 {a} - AP mode (checkbox)
 {ch}- cislo kanalu AP
 {c} - staticka IP konfigurace (checkbox)
 {i} - ip adresa
 {m} - maska
 {g} - brana
 {d} - dns server
 */
 static const char PAGE_INDEX2[] PROGMEM = R"=====(
 <form method='post' action='s'>
-<label>SSID<br><input id='_s' name='_s' maxlength=32 required placeholder='SSID' {s}></label><br>
+<label>SSID<br><input id='_s' name='_s' maxlength=32 required placeholder='SSID' value="$SSID$"></label><br>
-<label>Heslo<br><input id='_p' name='_p' maxlength=64 {p} type='password' placeholder='heslo'></label><br>
+<label>Heslo<br><input id='_p' name='_p' onfocus="this.select();" maxlength=64 value="$PASS$" type='password' placeholder='heslo'></label><br>
 <div>
-<label><input id='_a' name='_a' type='checkbox' style="width: 10%; float: left; margin-top: 5px;" onclick='hAP();' {a}>Režim AP</label>
+<label><input id='_a' name='_a' type='checkbox' style="width: 10%; float: left; margin-top: 5px;" onclick='hAP();' $APMODE$>Režim AP</label>
 <div id="apconfig">
-<label>Kanál<br><input type="number" name="_ch" min="1" max="13" title='cislo kanalu v intervalu 1-13' value='{ch}'></label><br>
+<label>Kanál<br><input type="number" name="_ch" min="1" max="13" title='cislo kanalu v intervalu 1-13' value='$APCHAN$'></label><br>
 </div>
 </div>
 <div>
-<label><input id='_st' name='_st' type='checkbox' style="width: 10%; float: left; margin-top: 5px;" onclick='hSC();' {c}>Statická IP konfigurace</label>
+<label><input id='_st' name='_st' type='checkbox' style="width: 10%; float: left; margin-top: 5px;" onclick='hSC();' $STATIC$>Statická IP konfigurace</label>
 <div id="staticip">
-<label>IP adresa<br><input type="text" name="_i" value='{i}'></label><br>
+<label>IP adresa<br><input type="text" name="_i" value='$IP$'></label><br>
-<label>Síťová maska<br><input type="text" name="_m" value='{m}'></label><br>
+<label>Síťová maska<br><input type="text" name="_m" value='$MASK$'></label><br>
-<label>Síťová brána<br><input type="text" name="_g" value='{g}'></label><br>
+<label>Síťová brána<br><input type="text" name="_g" value='$GATE$'></label><br>
-<label>Server DNS<br><input type="text" name="_d" value='{d}'></label><br>
+<label>Server DNS<br><input type="text" name="_d" value='$DNS$'></label><br>
 </div>
 </div>
-<script>hAP();hSC();</script>
+$USER$
 )=====";
 // Uzivatelsky pridane polozky
 static const char PAGE_PARAM_HDR[] PROGMEM = R"=====(
 <hr>
 <h2>Uživatelské položky</h2>
 )=====";
 static const char PAGE_PARAM[] PROGMEM = R"=====(
 <label>{t}<br><input name='{n}' maxlength='{l}' value='{v}'></label><br>
 )=====";
 // Konec formulare a stranky
 static const char PAGE_END[] PROGMEM = R"=====(
 <br>
 <button type='submit'>Uložit a restartovat</button></form>
 <script>
 window.onload = function() {
    hAP();
    hSC();
    var req = new XMLHttpRequest();
    req.open("GET", "/scan", true);
    req.onreadystatechange = function() {
        if (req.readyState != 4 || req.status != 200)
            return;
        ssids = document.getElementById('ssids');
        data = JSON.parse(req.responseText);
        status = data.status;
        html = "";
        if (status > 0) {
            for (i= 0 ; i < status; ++i) {
                lock = "";
                if (data.ssids[i].secure != 0)
                    lock = "l";
                value = data.ssids[i].rssi;
                if (value <= -100)
                    value = 0;
                else if (value >= -50)
                    value = 100;
                else
                    value = 2 * (value + 100);
                line = "<div><a href='#p' onclick='c(this)'>" + data.ssids[i].ssid + "</a>&nbsp;<span class='q " + lock + "'><meter value='" + value + "' min='0' low='30' optimum='70' high='60' max='100' style='width: 70%;'></meter></span></div>";
                html += line;
            }
            ssids.innerHTML = html;
        }
    };
    req.send();
 };
 </script>
 </div>)====="
 #if defined APP_NAME && defined APP_VERSION
 R"=====(<div style='text-align:right;font-size:11px;'><hr/>)====="
@ -94,6 +101,17 @@ R"=====(<div style='text-align:right;font-size:11px;'><hr/><a href='http://xpabl
 #endif
 R"=====(</body></html>
 )=====";
 // Uzivatelsky pridane polozky
 static const char PAGE_PARAM_HDR[] PROGMEM = R"=====(
 <hr>
 <h2>Uživatelské položky</h2>
 )=====";
 static const char PAGE_PARAM[] PROGMEM = R"=====(
 <label>%s<br><input name='%s' maxlength='%d' value='%s'></label><br>
 )=====";
 /*
 <div style='text-align:right;font-size:11px;'><hr/><a href='http://xpablo.cz' target='_blank' style='color:#aaa;'>WiFiConfig by xPablo</a></div>
 */
@ -109,17 +127,18 @@ static const char PAGE_SAVED[] PROGMEM = R"=====(
 <title>xPablo Setup - Konfigurace uložena</title>
 <style>div,input {margin-bottom: 5px;}body{width:200px;display:block;margin-left:auto;margin-right:auto;}</style>
 </head><body>
-Uloženo do EEPROM...<br/>
+Uloženo do Flash...<br/>
-Restart za 5 sekund.
+Restart za několik sekund.
 </body></html>
 )=====";
-static const char PAGE_CAPTIVEPORTALCATCH[] PROGMEM = R"=====(
+static const char PAGE_CAPTIVEPORTALCATCH[] PROGMEM = R"=====(<!DOCTYPE html>
-<!DOCTYPE html><html lang="cs"><head><meta charset="utf-8" name="viewport" content="width=device-width, initial-scale=1, user-scalable=no"/><title>xPablo.cz Setup</title>
+<html lang="cs"><head><meta charset="utf-8" name="viewport" content="width=device-width, initial-scale=1, user-scalable=no"/><title>xPablo.cz Setup</title>
 <style>.c{text-align: center;} div,input{padding:5px;font-size:1em;} input{width:95%;} body{text-align: center;font-family:verdana;} button{border:0;border-radius:0.3rem;background-color:#1fa3ec;color:#fff;line-height:2.4rem;font-size:1.2rem;width:100%;} .q{float: right;width: 64px;text-align: right;}
 .vl-info {border-left: thick solid #1fa3ec;background: #cee6ff; text-align:left; display:inline-block; min-width:260px; margin-top:15px}
 .red { background-color: #ff0000;}
 .magenta { background-color: #ff00ff;}
 .yellow { background-color: #FFD700;}
 </style>
 </head><body><div style='text-align:left;display:inline-block;min-width:260px;'>
 <form action="/config" method="get">
@ -127,18 +146,17 @@ static const char PAGE_CAPTIVEPORTALCATCH[] PROGMEM = R"=====(
 </form><br/>
 <form action="/i" method="get">
 <button>Informace o modulu</button>
-</form><br/><form action="/r" method="post">
+</form><br/>
 $RESTORE$
 <form action="/r" method="post">
 <button class="red">Reset</button></form><br>)====="
 #if defined USE_WIFICONFIG_OTAUPDATE
 R"=====(
 </form><br/><form action="/u" method="get">
 <button class="magenta">Aktualizace firmware</button></form><br>)====="
 #endif
-;
+R"=====(
-
+<div class=\"vl-info\">Pokus o připojení: $STATUS$</div>
 // druha cast (mezi 1. a 2. cast muzeme doplnit dodatecne informace)
 static const char PAGE_CAPTIVEPORTALCATCH2[] PROGMEM = R"=====(
 </div>
 )====="
 #if defined APP_NAME && defined APP_VERSION
 R"=====(<div style='text-align:right;font-size:11px;'><hr/>)====="
@ -153,8 +171,8 @@ R"=====(<div style='text-align:right;font-size:11px;'><hr/><a href='http://xpabl
 R"=====(</body></html>
 )=====";
-static const char PAGE_RESTART[] PROGMEM = R"=====(
+static const char PAGE_RESTART[] PROGMEM = R"=====(<!DOCTYPE html>
-<!DOCTYPE html><html lang="cs"><head><meta http-equiv="refresh" content="5;url=/"/>
+<html lang="cs"><head><meta http-equiv="refresh" content="5;url=/"/>
 <meta charset="utf-8" name="viewport" content="width=device-width, initial-scale=1"/>
 <title>xPablo Setup - Restart</title>
 <style>div,input {margin-bottom: 5px;}body{width:200px;display:block;margin-left:auto;margin-right:auto;}</style>
@ -217,3 +235,32 @@ domReady(function() {
 </body>
 </html>
 )=====";
 static const char PAGE_INFO[] PROGMEM = R"=====(
 <!DOCTYPE html><html lang="en"><head><meta charset= "utf-8"><meta name="viewport" content="width=device-width, initial-scale=1, user-scalable=no">
 <title>)=====" WIFICONFIG_WEBTITLE R"=====(</title>
 <style>
 .c{text-align: center;}
 div,input{padding:5px;font-size:1em;}
 input{width:95%;}
 body{text-align: center;font-family:verdana;}
 button{border:0;border-radius:0.3rem;background-color:#1fa3ec;color:#fff;line-height:2.4rem;font-size:1.2rem;width:100%;}
 .q{float: right;width: 64px;text-align: right;}
 </style>
 </head><body><h1>)=====" WIFICONFIG_TITLE R"=====(</h1><div style='text-align:left;display:inline-block;min-width:260px;'>
 <form><table><tr><th>System Info<th>
 <tr><td>Core Version:<td>$SDK$
 <tr><td>Flash Size:<td>$FS$ kB
 <tr><td>Sketch Size/Free:<td>$SS$ kB / $FSS$ kB
 <tr><td>STA MAC:<td>$STAMAC$
 <tr><td>AP MAC:<td>$APMAC$
 <tr><td>ESP Chip ID:<td>$ESPID$
 <tr><td>Flash Chip ID:<td>$FID$
 </table></form>
 )=====";
 static const char PAGE_RESTORE[] PROGMEM = R"=====(
 <form action="/o" method="post">
 <button class="yellow">Předminulá konfigurace</button>
 </form><br/>
 )=====";
Author	SHA1	Message	Date
Pavel Brychta	66cd08894e	Debugovaci mako	2022-06-08 13:01:10 +02:00
Pavel Brychta	36e0ab5f3a	Snaha o zprehledneni kodu.	2022-04-01 08:06:56 +02:00
Pavel Brychta	1ebcab01e7	Oprava pro preklad i pro ESP8266	2021-10-27 10:29:21 +02:00
Pavel Brychta	518b1b43c8	Moznost zapnout ArduinoOTA i pri bezicim konfiguracnim AP	2021-10-27 10:22:59 +02:00
Pablo2048	60fb85f3ff	Moznost predefinovat WifiConfigAPSSID metodu pro jiny zpusob definice SSID pro konfiguracni AP.	2021-10-16 17:45:56 +02:00
Pablo2048	3a6ddbcda4	Definice souboroveho systemu dle knihovny sysvars	2021-10-02 09:31:43 +02:00
Pavel Brychta	bead5efcf4	Pridana zavislost na sysvars	2021-09-23 07:00:34 +02:00
Pablo2048	d2e764bee0	BugFix v ulozeni gateway gate -> gw je spravne jmeno	2021-09-21 16:45:09 +02:00
Pavel Brychta	9797117ab9	Moznost pouzit predminulou konfiguraci	2021-08-26 07:03:29 +02:00
Pablo2048	610229d21d	Pouziti modifikovaneho template placeholderu (nutno overit!)	2021-08-25 17:32:19 +02:00
Pablo2048	cbeac02edc	Zalohovani stare konfigurace	2021-08-24 17:09:21 +02:00
Pablo2048	95a15b11dc	Moznost pouzit editor souboroveho systemu pomoci USE_WIFICONFIG_FSEDITOR, bugfix v ID cipu pro ESP32	2021-08-07 11:20:44 +02:00
Pablo2048	ba361b7ae4	Zavislosti knihovny	2021-07-25 14:17:50 +02:00
Pavel Brychta	99a4d17097	Chybejici parametrizace USEDFS	2021-06-29 12:33:10 +02:00
Pablo2048	8e857a1ae2	Zaklad pro verzi 7.x.x - Pouziva knihovnu sysvars, takze neni zavisla na zadnem druhu souboroveho systemu	2021-06-21 17:22:19 +02:00
Pavel Brychta	5c382257e9	Merge pull request 'LittleFS' (#10 ) from LittleFS into master Reviewed-on: #10	2021-06-21 17:19:55 +02:00
Pavel Brychta	3f433aedc8	Lepsi popis chyby konfigurace	2021-03-05 07:51:20 +01:00
Pavel Brychta	1106aa060a	Zprovozneni prikladu	2021-03-05 07:41:14 +01:00
Pablo2048	b608d36096	Upravy pro praci se sysvars	2021-03-04 17:36:43 +01:00
Pablo2048	6f845e1e45	Ukladani default konfigurace je funkcni, odstranena obsolete funkcnost	2021-02-27 10:56:20 +01:00
Pablo2048	170af78f28	Moznost nadefinovat vlastni titulek pro webovou stranku a popisku v prohlizeci	2020-11-28 11:40:28 +01:00
Pavel Brychta	dd4204c7a1	Jina aktivace noveho nastaveni. TODO: prekontrolovat, zda neni mozne metodu vyuzit i pri ukladani nove konfigurace z webu	2020-10-22 08:52:26 +02:00
Pavel Brychta	4cdce88ca5	Osetreni SSID, konciciho znakem ?, aktivace noveho nastaveni (pozor!!! mozna je problem se statickymi ip adresami - proverit...	2020-10-20 07:51:23 +02:00
Pavel Brychta	6f1dd6a7ba	Inicializace AP kanalu	2020-10-20 07:43:52 +02:00
Pablo2048	11aaf8450f	Priprava na ukladani predpripravene/default konfigurace	2020-10-17 12:50:42 +02:00
Pavel Brychta	2353bfa617	Merge pull request 'feature/APSTA' (#8 ) from feature/APSTA into master Reviewed-on: #8	2020-08-21 14:04:57 +02:00
Pavel Brychta	7ea5b222ad	Cekani na start AP pro ESP32	2020-08-21 14:03:36 +02:00
Pavel Brychta	f42c8a1bf3	Priprava pro rezim APSTA (bezi jak STA, tak AP)	2020-06-23 10:15:28 +02:00