# DualOptiboot

Zavaděč pro Arduino IDE a desky xPablo.cz

Based on:

Custom Optiboot to add wireless programming capability to Moteino
Copyright Felix Rusu (2013-2014), felix@lowpowerlab.com
More at: http://lowpowerlab.com/Moteino

This Optiboot version is modified to add the capability of reflashing
from an external SPI flash memory chip. As configured this will work
with Moteino (www.lowpowerlab.com/Moteino) provided a SPI flash chip
is present on the dedicated onboard footprint.
Summary of how this Optiboot version works:
- it looks for an external flash chip
- if one is found (SPI returns valid data) it will further look
  for a new sketch flash image signature and size
  starting at address 0:   FLXIMG:9999:XXXXXXXXXXX
  where: - 'FLXIMG' is fixed signature indicating FLASH chip
           contains a valid new flash image to be burned
         - '9999' are 4 size bytes indicating how long the
           new flash image is (how many bytes to read)
         - 'XXXXXX' are the de-hexified bytes of the flash
           pages to be burned
         - ':' colons have fixed positions (delimiters)
- if no valid signature/size are found, it will skip and
  function as it normally would (listen to STK500 protocol on serial port)

The added code will result in a compiled size of just under 1kb
(Originally Optiboot takes just under 0.5kb)

-------------------------------------------------------------------------------------------------------------

To compile copy the Optiboot.c and Makefile files where Optiboot is originally located, mine is at:
arduino-install-dir\hardware\arduino\bootloaders\optiboot\
Backup the original files andbefore overwrite both files.
Then compile by running:
make atmega328
make atmega1284p