#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>

#define USB_VID 0x303A
#define USB_PID 0x8110
#define USB_MANUFACTURER "Smart Bee Designs"
#define USB_PRODUCT "BeeS3"
#define USB_SERIAL ""

#define EXTERNAL_NUM_INTERRUPTS 45
#define NUM_DIGITAL_PINS        15
#define NUM_ANALOG_INPUTS       8

#define analogInputToDigitalPin(p)  (((p)<20)?(esp32_adc2gpio[(p)]):-1)
#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
#define digitalPinHasPWM(p)         (p < 46)

static const uint8_t TX = 43;
static const uint8_t RX = 44;

static const uint8_t SDA = 37;
static const uint8_t SCL = 36;

static const uint8_t SS    = 5;
static const uint8_t MOSI  = 35;
static const uint8_t MISO  = 38;
static const uint8_t SDO  = 35;
static const uint8_t SDI  = 38;
static const uint8_t SCK   = 39;


static const uint8_t A3 = 3;
static const uint8_t A4 = 4;
static const uint8_t A5 = 5;
static const uint8_t A6 = 6;
static const uint8_t A7 = 7;
static const uint8_t A8 = 8;
static const uint8_t A9 = 9;
static const uint8_t A10 = 10;

static const uint8_t D3 = 3;
static const uint8_t D4 = 4;
static const uint8_t D5 = 5;
static const uint8_t D6 = 6;
static const uint8_t D7 = 7;
static const uint8_t D8 = 8;
static const uint8_t D9 = 9;
static const uint8_t D10 = 10;
static const uint8_t D35 = 35;
static const uint8_t D36 = 36;
static const uint8_t D37 = 37;
static const uint8_t D38 = 38;
static const uint8_t D39 = 39;
static const uint8_t D43 = 43;
static const uint8_t D44 = 44;


static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;



static const uint8_t VBAT_VOLTAGE = 1;

static const uint8_t RGB_DATA = 48;
static const uint8_t RGB_PWR = 34;

#endif /* Pins_Arduino_h */