71 lines
2.5 KiB
Markdown
71 lines
2.5 KiB
Markdown
# WiFiScan Example
|
|
|
|
This example demonstrates how to use the WiFi library to scan available WiFi networks and print the results.
|
|
|
|
This example shows the basic functionality of the dual antenna capability.
|
|
|
|
# Supported Targets
|
|
|
|
This example is compatible with the ESP32-WROOM-DA.
|
|
|
|
## How to Use Example
|
|
|
|
* How to install the Arduino IDE: [Install Arduino IDE](https://github.com/espressif/arduino-esp32/tree/master/docs/arduino-ide).
|
|
|
|
#### Using Arduino IDE
|
|
|
|
* Before Compile/Verify, select the correct board: `Tools -> Board`.
|
|
* Select the COM port: `Tools -> Port: xxx` where the `xxx` is the detected COM port.
|
|
|
|
#### Using Platform IO
|
|
|
|
* Select the COM port: `Devices` or set the `upload_port` option on the `platformio.ini` file.
|
|
|
|
## Example/Log Output
|
|
|
|
```
|
|
ets Jul 29 2019 12:21:46
|
|
|
|
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
|
|
configsip: 0, SPIWP:0xee
|
|
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
|
|
mode:DIO, clock div:1
|
|
load:0x3fff0030,len:1412
|
|
load:0x40078000,len:13400
|
|
load:0x40080400,len:3672
|
|
entry 0x400805f8
|
|
Setup done
|
|
scan start
|
|
scan done
|
|
17 networks found
|
|
1: IoTNetwork (-62)*
|
|
2: WiFiSSID (-62)*
|
|
3: B3A7992 (-63)*
|
|
4: WiFi (-63)
|
|
5: IoTNetwork2 (-64)*
|
|
...
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
***Important: Be sure you're using a good quality USB cable and you have enough power source for your project.***
|
|
|
|
* **Programming Fail:** If the programming/flash procedure fails, try to reduce the serial connection speed.
|
|
* **COM port not detected:** Check the USB cable connection and the USB to Serial driver installation.
|
|
|
|
If the error persists, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
|
|
|
|
## Contribute
|
|
|
|
To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
|
|
|
|
If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
|
|
|
|
Before creating a new issue, be sure to try the Troubleshooting and to check if the same issue was already created by someone else.
|
|
|
|
## Resources
|
|
|
|
* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
|
|
* ESP32 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf)
|
|
* ESP32-WROOM-DA Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-wroom-da_datasheet_en.pdf)
|