thirdparty-ArduinoJson/CHANGELOG.md

ArduinoJson: change log

HEAD

• Added custom implementation of strtod() (issue #453)
• Added custom implementation of strtol() (issue #465)
• char is now treated as an integral type (issue #337, #370)

v5.8.3

• Fixed an access violation in DynamicJsonBuffer when memory allocation fails (issue #433)
• Added operators == and != for two JsonVariants (issue #436)
• Fixed JsonVariant::operator[const FlashStringHelper*] (issue #441)

v5.8.2

• Fixed parsing of comments (issue #421)
• Fixed ignored Stream timeout (issue #422)
• Made sure we don't read more that necessary (issue #422)
• Fixed error when the key of a JsonObject is a char[] (issue #423)
• Reduced code size when using const references
• Fixed error with string of type unsigned char* (issue #428)
• Added deprecated attribute on asArray(), asObject() and asString() (issue #420)

v5.8.1

• Fixed error when assigning a volatile int to a JsonVariant (issue #415)
• Fixed errors with Variable Length Arrays (issue #416)
• Fixed error when both ARDUINOJSON_ENABLE_STD_STREAM and ARDUINOJSON_ENABLE_ARDUINO_STREAM are set to 1
• Fixed error "Stream does not name a type" (issue #412)

v5.8.0

• Added operator == to compare JsonVariant and strings (issue #402)
• Added support for Stream (issue #300)
• Reduced memory consumption by not duplicating spaces and comments

BREAKING CHANGES:

JsonBuffer::parseObject() and JsonBuffer::parseArray() have been pulled down to the derived classes DynamicJsonBuffer and StaticJsonBufferBase.

This means that if you have code like:

void myFunction(JsonBuffer& jsonBuffer);

you need to replace it with one of the following:

void myFunction(DynamicJsonBuffer& jsonBuffer);
void myFunction(StaticJsonBufferBase& jsonBuffer);
template<typename TJsonBuffer> void myFunction(TJsonBuffer& jsonBuffer);

v5.7.3

• Added an printTo(char[N]) and prettyPrintTo(char[N]) (issue #292)
• Added ability to set a nested value like this: root["A"]["B"] = "C" (issue #352)
• Renamed *.ipp to *Impl.hpp because they were ignored by Arduino IDE (issue #396)

v5.7.2

• Made PROGMEM available on more platforms (issue #381)
• Fixed PROGMEM causing an exception on ESP8266 (issue #383)

v5.7.1

• Added support for PROGMEM (issue #76)
• Fixed compilation error when index is not an int (issue #381)

v5.7.0

• Templatized all functions using String or std::string
• Removed ArduinoJson::String
• Removed JsonVariant::defaultValue<T>()
• Removed non-template JsonObject::get() and JsonArray.get()
• Fixed support for StringSumHelper (issue #184)
• Replaced ARDUINOJSON_USE_ARDUINO_STRING by ARDUINOJSON_ENABLE_STD_STRING and ARDUINOJSON_ENABLE_ARDUINO_STRING (issue #378)
• Added example StringExample.ino to show where String can be used
• Increased default nesting limit to 50 when compiled for a computer (issue #349)

BREAKING CHANGES:

The non-template functions JsonObject::get() and JsonArray.get() have been removed. This means that you need to explicitely tell the type you expect in return.

Old code:

#define ARDUINOJSON_USE_ARDUINO_STRING 0
JsonVariant value1 = myObject.get("myKey");
JsonVariant value2 = myArray.get(0);

New code:

#define ARDUINOJSON_ENABLE_ARDUINO_STRING 0
#define ARDUINOJSON_ENABLE_STD_STRING 1
JsonVariant value1 = myObject.get<JsonVariant>("myKey");
JsonVariant value2 = myArray.get<JsonVariant>(0);

v5.6.7

• Fixed array[idx].as<JsonVariant>() and object[key].as<JsonVariant>()
• Fixed return value of JsonObject::set() (issue #350)
• Fixed undefined behavior in Prettyfier and Print (issue #354)
• Fixed parser that incorrectly rejected floats containing a + (issue #349)

v5.6.6

• Fixed -Wparentheses warning introduced in v5.6.5 (PR #335 by @nuket)
• Added .mbedignore for ARM mbdeb (PR #334 by @nuket)
• Fixed JsonVariant::success() which didn't propagate JsonArray::success() nor JsonObject::success() (issue #342).

v5.6.5

• as<char*>() now returns true when input is null (issue #330)

v5.6.4

• Fixed error in float serialization (issue #324)

v5.6.3

• Improved speed of float serialization (about twice faster)
• Added as<JsonArray>() as a synonym for as<JsonArray&>()... (issue #291)
• Fixed call of overloaded isinf(double&) is ambiguous (issue #284)

v5.6.2

• Fixed build when another lib does #undef isnan (issue #284)

v5.6.1

• Added missing #pragma once (issue #310)

v5.6.0

• ArduinoJson is now a header-only library (issue #199)

v5.5.1

• Fixed compilation error with Intel Galileo (issue #299)

v5.5.0

• Added JsonVariant::success() (issue #279)
• Renamed JsonVariant::invalid<T>() to JsonVariant::defaultValue<T>()

v5.4.0

• Changed ::String to ArduinoJson::String (issue #275)
• Changed ::Print to ArduinoJson::Print too

v5.3.0

• Added custom implementation of ftoa (issues #266, #267, #269 and #270)
• Added JsonVariant JsonBuffer::parse() (issue #265)
• Fixed unsigned long printed as signed long (issue #170)

v5.2.0

• Added JsonVariant::as<char*>() as a synonym for JsonVariant::as<const char*>() (issue #257)
• Added example JsonHttpClient (issue #256)
• Added JsonArray::copyTo() and JsonArray::copyFrom() (issue #254)
• Added RawJson() to insert pregenerated JSON portions (issue #259)

v5.1.1

• Removed String duplication when one replaces a value in a JsonObject (PR #232 by @ulion)

v5.1.0

• Added support of long long (issue #171)
• Moved all build settings to ArduinoJson/Configuration.hpp

BREAKING CHANGE: If you defined ARDUINOJSON_ENABLE_STD_STREAM, you now need to define it to 1.

v5.0.8

• Made the library compatible with PlatformIO (issue #181)
• Fixed JsonVariant::is<bool>() that was incorrectly returning false (issue #214)

v5.0.7

• Made library easier to use from a CMake project: simply add_subdirectory(ArduinoJson/src)
• Changed String to be a typedef of std::string (issues #142 and #161)

BREAKING CHANGES:

• JsonVariant(true).as<String>() now returns "true" instead of "1"
• JsonVariant(false).as<String>() now returns "false" instead of "0"

v5.0.6

• Added parameter to DynamicJsonBuffer constructor to set initial size (issue #152)
• Fixed warning about library category in Arduino 1.6.6 (issue #147)
• Examples: Added a loop to wait for serial port to be ready (issue #156)

v5.0.5

• Added overload JsonObjectSuscript::set(value, decimals) (issue #143)
• Use float instead of double to reduce the size of JsonVariant (issue #134)

v5.0.4

• Fixed ambiguous overload with JsonArraySubscript and JsonObjectSubscript (issue #122)

v5.0.3

• Fixed printTo(String) which wrote numbers instead of strings (issue #120)
• Fixed return type of JsonArray::is<T>() and some others (issue #121)

v5.0.2

• Fixed segmentation fault in parseObject(String) and parseArray(String), when the StaticJsonBuffer is too small to hold a copy of the string
• Fixed Clang warning "register specifier is deprecated" (issue #102)
• Fixed GCC warning "declaration shadows a member" (issue #103)
• Fixed memory alignment, which made ESP8266 crash (issue #104)
• Fixed compilation on Visual Studio 2010 and 2012 (issue #107)

v5.0.1

• Fixed compilation with Arduino 1.0.6 (issue #99)

v5.0.0

• Added support of String class (issues #55, #56, #70, #77)
• Added JsonBuffer::strdup() to make a copy of a string (issues #10, #57)
• Implicitly call strdup() for String but not for char* (issues #84, #87)
• Added support of non standard JSON input (issue #44)
• Added support of comments in JSON input (issue #88)
• Added implicit cast between numerical types (issues #64, #69, #93)
• Added ability to read number values as string (issue #90)
• Redesigned JsonVariant to leverage converting constructors instead of assignment operators (issue #66)
• Switched to new the library layout (requires Arduino 1.0.6 or above)

BREAKING CHANGES:

• JsonObject::add() was renamed to set()
• JsonArray::at() and JsonObject::at() were renamed to get()
• Number of digits of floating point value are now set with double_with_n_digits()

Personal note about the String class: Support of the String class has been added to the library because many people use it in their programs. However, you should not see this as an invitation to use the String class. The String class is bad because it uses dynamic memory allocation. Compared to static allocation, it compiles to a bigger, slower program, and is less predictable. You certainly don't want that in an embedded environment!

v4.6

• Fixed segmentation fault in DynamicJsonBuffer when memory allocation fails (issue #92)

v4.5

• Fixed buffer overflow when input contains a backslash followed by a terminator (issue #81)

Upgrading is recommended since previous versions contain a potential security risk.

Special thanks to Giancarlo Canales Barreto for finding this nasty bug.

v4.4

• Added JsonArray::measureLength() and JsonObject::measureLength() (issue #75)

v4.3

• Added JsonArray::removeAt() to remove an element of an array (issue #58)
• Fixed stack-overflow in DynamicJsonBuffer when parsing huge JSON files (issue #65)
• Fixed wrong return value of parseArray() and parseObject() when allocation fails (issue #68)

v4.2

• Switched back to old library layout (issues #39, #43 and #45)
• Removed global new operator overload (issue #40, #45 and #46)
• Added an example with EthernetServer

v4.1

• Added DynamicJsonBuffer (issue #19)

v4.0

• Unified parser and generator API (issue #23)
• Updated library layout, now requires Arduino 1.0.6 or newer

BREAKING CHANGE: API changed significantly, see Migrating code to the new API.

v3.4

• Fixed escaped char parsing (issue #16)

v3.3

• Added indented output for the JSON generator (issue #11), see example bellow.
• Added IndentedPrint, a decorator for Print to allow indented output

Example:

JsonOject<2> json;
json["key"] = "value";
json.prettyPrintTo(Serial);

v3.2

• Fixed a bug when adding nested object in JsonArray (bug introduced in v3.1).

v3.1

• Calling Generator::JsonObject::add() twice with the same key now replaces the value
• Added Generator::JsonObject::operator[], see bellow the new API
• Added Generator::JsonObject::remove() (issue #9)

Old generator API:

JsonObject<3> root;
root.add("sensor", "gps");
root.add("time", 1351824120);
root.add("data", array);

New generator API:

JsonObject<3> root;
root["sensor"] = "gps";
root["time"] = 1351824120;
root["data"] = array;

v3.0

• New parser API, see bellow
• Renamed JsonHashTable into JsonObject
• Added iterators for JsonArray and JsonObject (issue #4)

Old parser API:

JsonHashTable root = parser.parseHashTable(json);

char*  sensor    = root.getString("sensor");
long   time      = root.getLong("time");
double latitude  = root.getArray("data").getDouble(0);
double longitude = root.getArray("data").getDouble(1);

New parser API:

JsonObject root = parser.parse(json);

char*  sensor    = root["sensor"];
long   time      = root["time"];
double latitude  = root["data"][0];
double longitude = root["data"][1];

v2.1

• Fixed case #include "jsmn.cpp" which caused an error in Linux (issue #6)
• Fixed a buffer overrun in JSON Parser (issue #5)

v2.0

• Added JSON encoding (issue #2)
• Renamed the library ArduinoJsonParser becomes ArduinoJson

Breaking change: you need to add the following line at the top of your program.

using namespace ArduinoJson::Parser;

v1.2

• Fixed error in JSON parser example (issue #1)

v1.1

• Example: changed char* json into char[] json so that the bytes are not write protected
• Fixed parsing bug when the JSON contains multi-dimensional arrays

v1.0

Initial release