The introduction of an explicit cache_size configuration allows
customization of the cache buffers independently from the hardware
read/write sizes.
This has been one of littlefs's main handicaps. Without a distinction
between cache units and hardware limitations, littlefs isn't able to
read or program _less_ than the cache size. This leads to the
counter-intuitive case where larger cache sizes can actually be harmful,
since larger read/prog sizes require sending more data over the bus if
we're only accessing a small set of data (for example the CTZ skip-list
traversal).
This is compounded with metadata logging, since a large program size
limits the number of commits we can write out in a single metadata
block. It really doesn't make sense to link program size + cache
size here.
With a separate cache_size configuration, we can be much smarter about
what we actually read/write from disk.
This also simplifies cache handling a bit. Before there were two
possible cache sizes, but these were rarely used. Note that the
cache_size is NOT written to the superblock and can be freely changed
without breaking backwards compatibility.
Result of testing on zero-granularity blocks, where the prog size and
read size equals the block size. This represents SD cards and other
traditional forms of block storage where we don't really get a benefit
from the metadata logging.
Unfortunately, since updates in both are tested by the same script,
we can't really use simple bash commands. Added a more complex
script to simulate corruption. Fortunately this should be more robust
than the previous solutions.
The main fixes were around corner cases where the commit logic fell
apart when it didn't have room to complete commits, but these were
fixable in the current design.
The main thing to consider was how lfs_dir_fetchwith reacts to
corruption it finds and to make sure falling back to old values works
correctly.
Some of the tricky bits involved making sure we could fall back to both old
commits and old metadata blocks while still handling things like
synthetic moves correctly.
The main issue here was that the old orphan test relied on deleting the
block that contained the most recent update. In the new design this
doesn't really work since updates get appended to metadata-pairs
incrementally.
This is fixed by instead using the truncate command on the appropriate
block. We're now passing orphan tests.
Now that littlefs has been rebuilt almost from the ground up with the
intention to support custom attributes, adding in custom attribute
support is relatively easy.
The highest bit in the 9-bit type structure indicates that an attribute
is a user-specified custom attribute. The user then has a full 8-bits to
specify the attribute type. Other than that, custom attributes are
treated the same as system-level attributes.
Also made some tweaks to custom attributes:
- Adopted the opencfg for file-level attributes provided by dpgeorge
- Changed setattrs/getattrs to the simpler setattr/getattr functions
users will probably be more familiar with. Note that multiple
attributes can still be committed atomically with files, though not
with directories.
- Changed LFS_ATTRS_MAX -> LFS_ATTR_MAX since there's no longer a global
limit on the sum of attribute sizes, which was rather confusing.
Though they are still limited by what can fit in a metadata-pair.
I've been trying to keep tag types organized with an encoding that hints
if a tag uses its id field for file ids. However this seem to have been
a mistake. Using a null id of 0x3ff greatly simplified quite a bit of
the logic around managing file related tags.
The downside is one less id we can use, but if we look at the encoding
cost, donating one full bit costs us 2^9 id permutations vs 1 id
permutation. So even if we had a perfect encoding it's in our favor to
use a null id. The cost of null ids is code size, but with the
complexity around figuring out if a type used it's id or not it just
works out better to use a null id.
The issue lies in the reuse of the id field for globals. Before globals,
the only tags with a non-null (0x3ff) id field were names, structs, and
other file-specific metadata. But globals are also using this field for
the indirect delete, since otherwise the globals structure would be very
unaligned (74-bits long).
To make matters worse, the id field for globals contains the delta used
to reconstruct the globals at mount time. Which means the id field could
take on very absurd values and break the dir fetch logic if we're not
careful.
Solution is to use the scope portion of the type field where necessary,
although unforunately this does add some code cost.
Unfortunately, the behaviour needed of lfs_dir_fetchwith is as subtle as
it is important. When fetching from a block corrupted by power-loss,
lfs_dir_fetch must be able to rewind any state it picks up to before the
corruption. This is not limited to the directory state, but includes
find results and other side-effects.
This gets a bit complicated when trying to generalize littlefs's
fetchwith mechanics. Being able to scan a directory block during a fetch
greatly impacts the runtime of littlefs operations, but if the state is
generic how do we know what to rollback to?
The fix here is to leave the management of rolling back state to the
fetchwith match functions, and transparently pass a CRC tag to indicate
the temporary state can be saved.
Originally I tried to reuse the indirect delete to accomplish truely
atomic directory removes, however this fell apart when it came to
implementing directory removes as a side-effect of renames.
A single indirect-delete simply can't handle renames with removes as
a side effects. When copying an entry to its destination, we need to
atomically delete both the old entry, and the source of our copy. We
can't delete both with only a single indirect-delete. It is possible to
accomplish this with two indirect-deletes, but this is such an uncommon
case that it's really not worth supporting efficiently due to how
expensive globals are.
I also dropped indirect-deletes for normal directory removes. I may add
it back later, but at the moment it's extra code cost for that's not
traveled very often.
As a result, restructured the indirect delete handling to be a bit more
generic, now with a multipurpose lfs_globals_t struct instead of the
delete specific lfs_entry_t struct.
Also worked on integrating xored-globals, now with several primitive
global operations to manage fetching/updating globals on disk.
lfs_dir_fetchwith did not recover from failed dir fetches correctly,
added a temporary dir variable to hold dir contents while being
populated, allowing us to fall back to a known good dir state if a
commit is corrupted.
There is a RAM cost, but the upside is that our lfs_dir_fetchwith
actually works.
Also added better handling of move ids during some get functions.
Integration with the new journaling metadata has now progressed to the
point where all of the basic functionality tests are passing. This
includes:
- test_format
- test_dirs
- test_files
- test_seek
- test_truncate
- test_interspersed
- test_paths
Some of the fixes:
- Modified move to correctly change entry ids
- Called lfs_commit_move directly from compact, avoiding commit parsing
logic during a compact
- Opened up commit filters to be passed down from compact for moves
- Added correct drop logic to lfs_dir_delete
- Updated lfs_dir_seek to use ids instead of offsets
- Caught id updates manually where possible (this needs to be fixed)
Now with some tweaks to commit/compact, and a committers for entrylists and
moves specifically. No longer relying on a commitwith callback, the
types of commits are now infered from their tags.
This means we can now commit things atomically with special commits,
such as moves. Now lfs_rename can move entries to new names correctly.
Passing more tests now with the journalling change, but still have more
work to do.
The most humorous bug was a bug where during the three step move
process, the entry move logic would dumbly copy over any tags associated
with the moving entry, including the tag used to temporarily mark the
entry as "moving".
Also combined dir and commit traversal using a "stop_at_commit" flag in
directory struct as a short-term hack to combine the code paths.
Making the superblock look like "just another entry" allows us to treat
the superblock like "just another entry" and reuse a decent amount of
logic that would otherwise only be used a format and mount time. In this
case we can use append to write out the superblock like it was creating
a new entry on the filesystem.
Now when a file overflows the max inline file size, it will be correctly
written out to a proper block. Additionally, tweaked corner cases around
inline file, however this still needs significant testing.
A real neat part that surprised me is that littlefs _already_ contains
the logic for writing out inline files: in lfs_file_relocate! With a bit
of tweaking, littlefs can pull off both the overflow from inline to
normal files _and_ the relocating of bad blocks in files with the same
piece of logic.
Proof-of-concept implementation of inline files that stores the file's
content directly in its parent's directory pair.
Inline files are indicated by a different type stored in an entry's
struct field, and take advantage of resizable entries. Where a normal
file's entry would normally hold the reference to the CTZ skip-list, an
inline file's entry contains the contents of the actual file.
Unfortunately, storing the inline file on disk is the easy part. We also
need to manage inline files in the internals of littlefs and provide the
same operations that we do on normal files, all while reusing as much
code as possible to avoid a significant increase in code cost.
There is a relatively simple, though maybe a bit hacky, solution here. If a
file fits entirely in a cache line, the file logic never actually has to go to
disk. This means we can just give the file a "pretend" block (hopefully
one that would assert if ever written to), and carry out file operations
as normal, as long as we catch the file before it exceeds the cache line
and write out the file to an actual disk.
One of the big simplifications in littlefs's implementation is the
complete lack of tracking free blocks, allowing operations to simply
drop blocks that are no longer in use.
However, this means the lookahead buffer can easily contain outdated
blocks that were previously deleted. This is usually fine, as littlefs
will rescan the storage if it can't find a free block in the lookahead
buffer, but after changes that caused littlefs to more conservatively
respect the alloc acks (e611cf5), any scanned blocks after an ack would
be incorrectly trusted.
The fix is to eagerly scan ahead in the lookahead when we allocate so
that alloc acks are better able to discredit old lookahead blocks. Since
usually alloc acks are tightly coupled to allocations of one or two blocks,
this allows littlefs to properly rescan every set of allocations.
This may still be a concern if there is a long series of worn out
blocks, but in the worst case littlefs will conservatively avoid using
blocks it's not sure about.
Found by davidefer
Like most of the lfs_dir_t functions, lfs_dir_append is responsible for
updating the lfs_dir_t struct if the underlying directory block is
moved. This property makes handling worn out blocks much easier by
removing the amount of state that needs to be considered during a
directory update.
However, extending the dir chain is a bit of a corner case. It's not
changing the old block, but callers of lfs_dir_append do assume the
"entry" will reside in "dir" after lfs_dir_append completes.
This issue only occurs when creating files, since mkdir does not use
the entry after lfs_dir_append. Unfortunately, the tests against
extending the directory chain were all made using mkdir.
Found by schouleu
Before this patch, when calling lfs_mkdir or lfs_file_open with root
as the target, littlefs wouldn't find the path properly and happily
run into undefined behaviour.
The fix is to populate a directory entry for root in the lfs_dir_find
function. As an added plus, this allowed several special cases around
root to be completely dropped.
Using gcc cross compilers and qemu:
- make test CC="arm-linux-gnueabi-gcc --static -mthumb" EXEC="qemu-arm"
- make test CC="powerpc-linux-gnu-gcc --static" EXEC="qemu-ppc"
- make test CC="mips-linux-gnu-gcc --static" EXEC="qemu-mips"
Also separated out Travis jobs and added some size reporting
Rather than tracking all in-flight blocks blocks during a lookahead,
littlefs uses an ack scheme to mark the first allocated block that
hasn't reached the disk yet. littlefs assumes all blocks since the
last ack are bad or in-flight, and uses this to know when it's out
of storage.
However, these unacked allocations were still being populated in the
lookahead buffer. If the whole block device fits in the lookahead
buffer, _and_ littlefs managed to scan around the whole storage while
an unacked block was still in-flight, it would assume the block was
free and misallocate it.
The fix is to only fill the lookahead buffer up to the last ack.
The internal free structure was restructured to simplify the runtime
calculation of lookahead size.
- Write on read-only file to return LFS_ERR_BADF
- Renaming directory onto file to return LFS_ERR_NOTEMPTY
- Changed LFS_ERR_INVAL in lfs_file_seek to assert
- no previous prototype for ‘test_assert’
- no previous prototype for ‘test_count’
- unused parameter ‘b’ in test_count
- function declaration isn’t a prototype for main
The most useful part of -Werror is preventing code from being
merged that has warnings. However it is annoying for users who may have
different compilers with different warnings. Limiting -Werror to CI only
covers the main concern about warnings without limiting users.
Some of the tests were creating a variable `res`, however the test
system itself relies on it's own `res` variable. This worked out by
luck, but could lead to problems if the res variables were different
types.
Changed the generated variable in the test system to the less common
name `test`, which also works out to share the same prefix as other test
functions.
Found by user iamscottmoyers, this was an interesting bug with the test
system. If the new test.c file is generated fast enough, it may not have
a new timestamp and not get recompiled.
To fix, we can remove the specific files that need to be rebuilt (lfs and
test.o).
As a copy-on-write filesystem, the truncate function is a very nice
function to have, as it can take advantage of reusing the data already
written out to disk.
In the open call, the LFS_O_TRUNC flag was correctly zeroing the file, but
it wasn't actually writing the change out to disk. This went unnoticed because
in the cases where the truncate was followed by a file write, the
updated contents would be written out correctly.
Marking the file as dirty if the file isn't already truncated fixes the
problem with the least impact. Also added better test cases around
truncating files.
This bug was a result of an annoying corner case around intermingling
signed and unsigned offsets. The boundary check that prevents seeking
a file to a position before the file was preventing valid seeks with
positive offsets.
This corner case is a bit more complicated than it looks because the
offset is signed, while the size of the file is unsigned. Simply
casting both to signed or unsigned offsets won't handle large files.
As it was, if a user operated on a directory while at the same
time iterating over the directory, the directory objects could
fall out of sync. In the best case, files may be skipped while
removing everything in a file, in the worst case, a very poorly
timed directory relocate could be missed.
Simple fix is to add the same directory tracking that is currently
in use for files, at a small code+complexity cost.
Short story, files are no longer committed to directories during
file sync/close if the last write did not complete successfully.
This avoids a set of interesting user-experience issues related
to the end-of-life behaviour of the filesystem.
As a filesystem approaches end-of-life, the chances of running into
LFS_ERR_NOSPC grows rather quickly. Since this condition occurs after
at the end of a devices life, it's likely that operating in these
conditions hasn't been tested thoroughly.
In the specific case of file-writes, you can hit an LFS_ERR_NOSPC after
parts of the file have been written out. If the program simply continues
and closes the file, the file is written out half completed. Since
littlefs has a strong garuntee the prevents half-writes, it's unlikely
this state of the file would be expected.
To make things worse, since close is also responsible for memory
cleanup, it's actually _impossible_ to continue working as it was
without leaking memory.
By prevent the file commits, end-of-life behaviour should at least retain
a previous copy of the filesystem without any surprises.
This is only an issue in the weird case that are worn down block is
left in the odd state of not being able to change the data that resides
on the block. That being said, this does pop up often when simulating
wear on block devices.
Currently, directory commits checked if the write succeeded by crcing the
block to avoid the additional RAM cost for another buffer. However,
before this commit, directory commits just checked if the block crc was
valid, rather than comparing to the expected crc. This would usually
work, unless the block was stuck in a state with valid crc.
The fix is to simply compare with the expected crc to find errors.
The "move problem" has been present in littlefs for a while, but I haven't
come across a solution worth implementing for various reasons.
The problem is simple: how do we move directory entries across
directories atomically? Since multiple directory entries are involved,
we can't rely entirely on the atomic block updates. It ends up being
a bit of a puzzle.
To make the problem more complicated, any directory block update can
fail due to wear, and cause the directory block to need to be relocated.
This happens rarely, but brings a large number of corner cases.
---
The solution in this patch is simple:
1. Mark source as "moving"
2. Copy source to destination
3. Remove source
If littlefs ever runs into a "moving" entry, that means a power loss
occured during a move. Either the destination entry exists or it
doesn't. In this case we just search the entire filesystem for the
destination entry.
This is expensive, however the chance of a power loss during a move
is relatively low.
lfs_file_seek returned the _previous_ file offset on success, where
most standards return the _calculated_ offset on success.
This just falls into me not noticing a mistake, and shows why it's
always helpful to have a second set of eyes on code.
Moslty just a hole in testing. Dir blocks were not being
correctly collected when removing entries from very large
files due to forgetting about the tail-bit in the directory
block size. The test hole has now been filled.
Also added lfs_entry_size to avoid having to repeat that
expression since it is a bit ridiculous
- out-of-bound read results in eof
- out-of-bound write will fill missing area with zeros
The write behaviour matches expected posix behaviour, but was
under consideration for not being dropped, since littlefs does
not support holes, and support of out-of-band seeks adds complexity.
However, it turned out filling with zeros was trivial, and only
cost an extra 74 bytes of flash (0.48%).
This off-by-one error was caused by a slight difference between the
pos argument to lfs_index_find and lfs_index_extend. When pos is on
a block boundary, lfs_index_extend expects block to point before pos,
as it would when writing a file linearly. But when seeking to that
pos, the lfs_index_find to warm things up just supplies the block it
expects pos to be in.
Fixed the off-by-one error and added a test case for several of these
cold seek+writes.
Directories still consume two full erase blocks, but now only program
the exact on-disk region to store the directory contents. This results
in a decent improvement in the amount of data written and read to the
device when doing directory operations.
Calculating the checksum of dynamically sized data is surprisingly
tricky, since the size of the data could also contain errors. For the
littlefs, we can assume the data size must fit in an erase block.
If the data size is invalid, we can just treat the block as corrupted.
This provides a limited form of wear leveling. While wear is
not actually balanced across blocks, the filesystem can recover
from corrupted blocks and extend the lifetime of a device nearly
as much as dynamic wear leveling.
For use-cases where wear is important, it would be better to use
a full form of dynamic wear-leveling at the block level. (or
consider a logging filesystem).
Corrupted block handling was simply added on top of the existing
logic in place for the filesystem, so it's a bit more noodly than
it may have to be, but it gets the work done.
