- Added caching to Travis install dirs, because otherwise
pip3 install fails randomly
- Increased size of littlefs-fuse disk because test script has
a larger footprint now
- Skip a couple of reentrant tests under byte-level writes because
the tests just take too long and cause Travis to bail due to no
output for 10m
- Fixed various Valgrind errors
- Suppressed uninit checks for tests where LFS_BLOCK_ERASE_VALUE == -1.
In this case rambd goes uninitialized, which is fine for rambd's
purposes. Note I couldn't figure out how to limit this suppression
to only the malloc in rambd, this doesn't seem possible with Valgrind.
- Fixed memory leaks in exhaustion tests
- Fixed off-by-1 string null-terminator issue in paths tests
- Fixed lfs_file_sync issue caused by revealed by fixing memory leaks
in exhaustion tests. Getting ENOSPC during a file write puts the file
in a bad state where littlefs doesn't know how to write it out safely.
In this case, lfs_file_sync and lfs_file_close return 0 without
writing out state so that device-side resources can still be cleaned
up. To recover from ENOSPC, the file needs to be reopened and the
writes recreated. Not sure if there is a better way to handle this.
- Added some quality-of-life improvements to Valgrind testing
- Fit Valgrind messages into truncated output when not in verbose mode
- Turned on origin tracking
This is a bit of a strange case that can be caused by storage with
very large prog sizes, such as NAND flash. We only have 10 bits to store
the size of our padding, so when the prog_size gets larger than 1024
bytes, we have to use multiple padding tags to commit to the next
prog_size boundary.
This causes some complication for the new logic that checks CRCs in case
our block becomes "readonly" and contains existing commits that just happen
to match our new commit size.
Here we just check the CRC of the first commit. This isn't perfect but
does protect against pure "readonly" blocks.
These should probably have been cleaned up in each commit to allow
cherry-picking, but due to time I haven't been able to.
- Went with creating an mdir copy in lfs_dir_commit. This handles a
number of related cleanup issues in lfs_dir_compact and it does so
more robustly. As a plus we can use the copy to update dependencies
in the mlist.
- Eliminated code left by the ENOSPC file outlining
- Cleaned up TODOs and lingering comments
- Changed the reentrant many directory create/rename/remove test to use
a smaller set of directories because of space issues when
READ/PROG_SIZE=512
This was caused by the previous fix for allocations during
lfs_fs_deorphan in this branch. To catch half-orphans during block
allocations we needed to duplicate all metadata-pairs reported to
lfs_fs_traverse. Unfortunately this causes lfs_fs_size to report 2x the
number of metadata-pairs, which would undoubtably confuse users.
The fix here is inelegantly simple, just do a different traversale for
allocations and size measurements. It reuses the same code but touches
slightly different sets of blocks.
Unfortunately, this causes the public lfs_fs_traverse and lfs_fs_size
functions to split in how they report blocks. This is technically
allowed, since lfs_fs_traverse may report blocks multiple times due to
CoW behavior, however it's undesirable and I'm sure there will be some
confusion.
But I don't have a better solution, so from this point lfs_fs_traverse
will be reporting 2x metadata-blocks and shouldn't be used for finding
the number of available blocks on the filesystem.
This was an interesting issue found during a GitHub discussion with
rmollway and thrasher8390.
Blocks in the metadata-pair are relocated every "block_cycles", or, more
mathy, when rev % block_cycles == 0 as long as rev += 1 every block write.
But there's a problem, rev isn't += 1 every block write. There are two
blocks in a metadata-pair, so looking at it from each blocks
perspective, rev += 2 every block write.
This leads to a sort of aliasing issue, where, if block_cycles is
divisible by 2, one block in the metadata-pair is always relocated, and
the other block is _never_ relocated. Causing a complete failure of
block-level wear-leveling.
Fortunately, because of a previous workaround to avoid block_cycles = 1
(since this will cause the relocation algorithm to never terminate), the
actual math is rev % (block_cycles+1) == 0. This means the bug only
shows its head in the much less likely case where block_cycles is a
multiple of 2 plus 1, or, in more mathy terms, block_cycles = 2n+1 for
some n.
To workaround this we can bitwise or our block_cycles with 1 to force it
to never be a multiple of 2n.
(Maybe we should do this during initialization? But then block_cycles
would need to be mutable.)
---
There's a few unrelated changes mixed into this commit that shouldn't be
there since I added this as part of a branch of bug fixes I'm putting
together rather hastily, so unfortunately this is not easily cherry-pickable.
This was initially added as protection against the case where a file
grew to no longer fit in a metadata-pair. While in most cases this
should be caught by the math in lfs_file_write, it doesn't handle a
problem that can happen if the files metadata is large enough that even
small inline files can't fit. This can happen if you combine a small
block size with large file names and many custom attributes.
But trying to outline on ENOSPC creates creates a lot of problems.
If we are actually low on space, this is one of the worst things we can
do. Inline files take up less space than CTZ skip-lists, but inline
files are rendered useless if we outline inline files as soon as we run
low on space.
On top of this, the outlining logic tries multiple mdir commits if it
gets ENOSPC, which can hide errors if ENOSPC is returned for other
reasons.
In a perfect world, we would be using a different error code for
no-room-in-metadata-pair, and no-blocks-on-disk.
For now I've removed the outlining logic and we will need to figure out
how to handle this situation more robustly.
It's interesting how many ways block devices can show failed writes:
1. prog can error
2. erase can error
3. read can error after writing (ECC failure)
4. prog doesn't error but doesn't write the data correctly
5. erase doesn't error but doesn't erase correctly
Can read fail without an error? Yes, though this appears the same as
prog and erase failing.
These weren't all simulated by testbd since I unintentionally assumed
the block device could always error. Fixed by added additional bad-black
behaviors to testbd.
Note: This also includes a small fix where we can miss bad writes if the
underlying block device contains a valid commit with the exact same
size in the exact same offset.
Fixes:
- Fixed reproducability issue when we can't read a directory revision
- Fixed incorrect erase assumption if lfs_dir_fetch exceeds block size
- Fixed cleanup issue caused by lfs_fs_relocate failing when trying to
outline a file in lfs_file_sync
- Fixed cleanup issue if we run out of space while extending a CTZ skip-list
- Fixed missing half-orphans when allocating blocks during lfs_fs_deorphan
Also:
- Added cycle-detection to readtree.py
- Allowed pseudo-C expressions in test conditions (and it's
beautifully hacky, see line 187 of test.py)
- Better handling of ctrl-C during test runs
- Added build-only mode to test.py
- Limited stdout of test failures to 5 lines unless in verbose mode
Explanation of fixes below
1. Fixed reproducability issue when we can't read a directory revision
An interesting subtlety of the block-device layer is that the
block-device is allowed to return LFS_ERR_CORRUPT on reads to
untouched blocks. This can easily happen if a user is using ECC or
some sort of CMAC on their blocks. Normally we never run into this,
except for the optimization around directory revisions where we use
uninitialized data to start our revision count.
We correctly handle this case by ignoring whats on disk if the read
fails, but end up using unitialized RAM instead. This is not an issue
for normal use, though it can lead to a small information leak.
However it creates a big problem for reproducability, which is very
helpful for debugging.
I ended up running into a case where the RAM values for the revision
count was different, causing two identical runs to wear-level at
different times, leading to one version running out of space before a
bug occured because it expanded the superblock early.
2. Fixed incorrect erase assumption if lfs_dir_fetch exceeds block size
This could be caused if the previous tag was a valid commit and we
lost power causing a partially written tag as the start of a new
commit.
Fortunately we already have a separate condition for exceeding the
block size, so we can force that case to always treat the mdir as
unerased.
3. Fixed cleanup issue caused by lfs_fs_relocate failing when trying to
outline a file in lfs_file_sync
Most operations involving metadata-pairs treat the mdir struct as
entirely temporary and throw it out if any error occurs. Except for
lfs_file_sync since the mdir is also a part of the file struct.
This is relevant because of a cleanup issue in lfs_dir_compact that
usually doesn't have side-effects. The issue is that lfs_fs_relocate
can fail. It needs to allocate new blocks to relocate to, and as the
disk reaches its end of life, it can fail with ENOSPC quite often.
If lfs_fs_relocate fails, the containing lfs_dir_compact would return
immediately without restoring the previous state of the mdir. If a new
commit comes in on the same mdir, the old state left there could
corrupt the filesystem.
It's interesting to note this is forced to happen in lfs_file_sync,
since it always tries to outline the file if it gets ENOSPC (ENOSPC
can mean both no blocks to allocate and that the mdir is full). I'm
not actually sure this bit of code is necessary anymore, we may be
able to remove it.
4. Fixed cleanup issue if we run out of space while extending a CTZ
skip-list
The actually CTZ skip-list logic itself hasn't been touched in more
than a year at this point, so I was surprised to find a bug here. But
it turns out the CTZ skip-list could be put in an invalid state if we
run out of space while trying to extend the skip-list.
This only becomes a problem if we keep the file open, clean up some
space elsewhere, and then continue to write to the open file without
modifying it. Fortunately an easy fix.
5. Fixed missing half-orphans when allocating blocks during
lfs_fs_deorphan
This was a really interesting bug. Normally, we don't have to worry
about allocations, since we force consistency before we are allowed
to allocate blocks. But what about the deorphan operation itself?
Don't we need to allocate blocks if we relocate while deorphaning?
It turns out the deorphan operation can lead to allocating blocks
while there's still orphans and half-orphans on the threaded
linked-list. Orphans aren't an issue, but half-orphans may contain
references to blocks in the outdated half, which doesn't get scanned
during the normal allocation pass.
Fortunately we already fetch directory entries to check CTZ lists, so
we can also check half-orphans here. However this causes
lfs_fs_traverse to duplicate all metadata-pairs, not sure what to do
about this yet.
The power-cycled-relocation test with random renames has been the most
aggressive test applied to littlefs so far, with:
- Random nested directory creation
- Random nested directory removal
- Random nested directory renames (this could make the
threaded linked-list very interesting)
- Relocating blocks every write (maximum wear-leveling)
- Incrementally cycling power every write
Also added a couple other tests to test_orphans and test_relocations.
The good news is the added testing worked well, it found quite a number
of complex and subtle bugs that have been difficult to find.
1. It's actually possible for our parent to be relocated and go out of
sync in lfs_mkdir. This can happen if our predecessor's predecessor
is our parent as we are threading ourselves into the filesystem's
threaded list. (note this doesn't happen if our predecessor _is_ our
parent, as we then update our parent in a single commit).
This is annoying because it only happens if our parent is a long (>1
pair) directory, otherwise we wouldn't need to catch relocations.
Fortunately we can reuse the internal open file/dir linked-list to
catch relocations easily, as long as we're careful to unhook our
parent whenever lfs_mkdir returns.
2. Even more surprising, it's possible for the child in lfs_remove
to be relocated while we delete the entry from our parent. This
can happen if we are our own parent's predecessor, since we need
to be updated then if our parent relocates.
Fortunately we can also hook into the open linked-list here.
Note this same issue was present in lfs_rename.
Fortunately, this means now all fetched dirs are hooked into the
open linked-list if they are needed across a commit. This means
we shouldn't need assumptions about tree movement for correctness.
3. lfs_rename("deja/vu", "deja/vu") with the same source and destination
was broken and tried to delete the entry twice.
4. Managing gstate deltas when we lose power during relocations was
broken. And unfortunately complicated.
The issue happens when we lose power during a relocation while
removing a directory.
When we remove a directory, we need to move the contents of its
gstate delta to another directory or we'll corrupt littlefs gstate.
(gstate is an xor of all deltas on the filesystem). We used to just
xor the gstate into our parent's gstate, however this isn't correct.
The gstate isn't built out of the directory tree, but rather out of
the threaded linked-list (which exists to make collecting this
gstate efficient).
Because we have to remove our dir in two operations, there's a point
were both the updated parent and child can exist in threaded
linked-list and duplicate the child's gstate delta.
.--------.
->| parent |-.
| gstate | |
.-| a |-'
| '--------'
| X <- child is orphaned
| .--------.
'>| child |->
| gstate |
| a |
'--------'
What we need to do is save our child's gstate and only give it to our
predecessor, since this finalizes the removal of the child.
However we still need to make valid updates to the gstate to mark
that we've created an orphan when we start removing the child.
This led to a small rework of how the gstate is handled. Now we have
a separation of the gpending state that should be written out ASAP
and the gdelta state that is collected from orphans awaiting
deletion.
5. lfs_deorphan wasn't actually able to handle deorphaning/desyncing
more than one orphan after a power-cycle. Having more than one orphan
is very rare, but of course very possible. Fortunately this was just
a mistake with using a break the in the deorphan, perhaps left from
v1 where multiple orphans weren't possible?
Note that we use a continue to force a refetch of the orphaned block.
This is needed in the case of a half-orphan, since the fetched
half-orphan may have an outdated tail pointer.
The root of the problem was some assumptions about what tags could be
sent to lfs_dir_commit.
- The first assumption is that there could be only one splice (create/delete)
tag at a time, which is trivially broken by the core commit in lfs_rename.
- The second assumption is that there is at most one create and one delete in
a single commit. This is less obvious but turns out to not be true in
the case that we rename a file such that it overwrites another file in
the same directory (1 delete for source file, 1 delete for destination).
- The third assumption was that there was an ordering to the
delete/creates passed to lfs_dir_commit. It may be possible to force all
deletes to follow creates by rearranging the tags in lfs_rename, but
this risks overflowing tag ids.
The way the lfs_dir_commit first collected the "deletetag" and "createtag"
broke all three of these assumptions. And because we lose the ordering
information we can no longer apply the directory changes to open files
correctly. The file ids may be shifted in a way that doesn't reflect the
actual operations on disk.
These problems were made worst by lfs_dir_commit cleaning up moves
implicitly, which also creates deletes implicitly. While cleaning up moves
in lfs_dir_commit may save some code size, it makes the commit logic much more
difficult to implement correctly.
This bug turned into pulling out a dead tree stump, roots and all.
I ended up reworking how lfs_dir_commit updates open files so that it
has less assumptions, now it just traverses the commit tags multiple
times in order to update file ids after a successful commit in the
correct order.
This also got rid of the dir copy by carefully updating split dirs
after all files have an up-to-date copy of the original dir.
I also just removed the implicit move cleanup. It turns out the only
commits that can occur before we have cleaned up the move is in
lfs_fs_relocate, so it was simple enough to explicitly handle this case
when we update our parent and pred during a relocate.
Cases where we may need to fix moves:
- In lfs_rename when we move a file/dir
- In lfs_demove if we lose power
- In lfs_fs_relocate if we have to relocate our parent and we find it
had a pending move (or else the move will be outdated)
- In lfs_fs_relocate if we have to relocate our predecessor and we find it
had a pending move (or else the move will be outdated)
Note the two cases in lfs_fs_relocate may be recursive. But
lfs_fs_relocate can only trigger other lfs_fs_relocates so it's not
possible for pending moves to spill out into other filesystem commits
And of couse, I added several tests to cover these situations. Hopefully
the rename-with-open-files logic should be fairly locked down now.
found with initial fix by eastmoutain
Also fixed a bug in dir splitting when there's a large number of open
files, which was the main reason I was trying to make it easier to debug
disk images.
One part of the recent test changes was to move away from the
file-per-block emubd and instead simulate storage with a single
contiguous file. The file-per-block format was marginally useful
at the beginning, but as the remaining bugs get more subtle, it
becomes more useful to inspect littlefs through scripts that
make the underlying metadata more human-readable.
The key benefit of switching to a contiguous file is these same
scripts can be reused for real disk images and can even read through
/dev/sdb or similar.
- ./scripts/readblock.py disk block_size block
off data
00000000: 71 01 00 00 f0 0f ff f7 6c 69 74 74 6c 65 66 73 q.......littlefs
00000010: 2f e0 00 10 00 00 02 00 00 02 00 00 00 04 00 00 /...............
00000020: ff 00 00 00 ff ff ff 7f fe 03 00 00 20 00 04 19 ...............
00000030: 61 00 00 0c 00 62 20 30 0c 09 a0 01 00 00 64 00 a....b 0......d.
...
readblock.py prints a hex dump of a given block on disk. It's basically
just "dd if=disk bs=block_size count=1 skip=block | xxd -g1 -" but with
less typing.
- ./scripts/readmdir.py disk block_size block1 block2
off tag type id len data (truncated)
0000003b: 0020000a dir 0 10 63 6f 6c 64 63 6f 66 66 coldcoff
00000049: 20000008 dirstruct 0 8 02 02 00 00 03 02 00 00 ........
00000008: 00200409 dir 1 9 68 6f 74 63 6f 66 66 65 hotcoffe
00000015: 20000408 dirstruct 1 8 fe 01 00 00 ff 01 00 00 ........
readmdir.py prints info about the tags in a metadata pair on disk. It
can print the currently active tags as well as the raw log of the
metadata pair.
- ./scripts/readtree.py disk block_size
superblock "littlefs"
version v2.0
block_size 512
block_count 1024
name_max 255
file_max 2147483647
attr_max 1022
gstate 0x000000000000000000000000
dir "/"
mdir {0x0, 0x1} rev 3
v id 0 superblock "littlefs" inline size 24
mdir {0x77, 0x78} rev 1
id 0 dir "coffee" dir {0x1fc, 0x1fd}
dir "/coffee"
mdir {0x1fd, 0x1fc} rev 2
id 0 dir "coldcoffee" dir {0x202, 0x203}
id 1 dir "hotcoffee" dir {0x1fe, 0x1ff}
dir "/coffee/coldcoffee"
mdir {0x202, 0x203} rev 1
dir "/coffee/warmcoffee"
mdir {0x200, 0x201} rev 1
readtree.py parses the littlefs tree and prints info about the
semantics of what's on disk. This includes the superblock,
global-state, and directories/metadata-pairs. It doesn't print
the filesystem tree though, that could be a different tool.
Also finished migrating tests with test_relocations and test_exhaustion.
The issue I was running into when migrating these tests was a lack of
flexibility with what you could do with the block devices. It was
possible to hack in some hooks for things like bad blocks and power
loss, but it wasn't clean or easily extendable.
The solution here was to just put all of these test extensions into a
third block device, testbd, that uses the other two example block
devices internally.
testbd has several useful features for testing. Note this makes it a
pretty terrible block device _example_ since these hooks look more
complicated than a block device needs to be.
- testbd can simulate different erase values, supporting 1s, 0s, other byte
patterns, or no erases at all (which can cause surprising bugs). This
actually depends on the simulated erase values in ramdb and filebd.
I did try to move this out of rambd/filebd, but it's not possible to
simulate erases in testbd without buffering entire blocks and creating
an excessive amount of extra write operations.
- testbd also helps simulate power-loss by containing a "power cycles"
counter that is decremented every write operation until it calls exit.
This is notably faster than the previous gdb approach, which is
valuable since the reentrant tests tend to take a while to resolve.
- testbd also tracks wear, which can be manually set and read. This is
very useful for testing things like bad block handling, wear leveling,
or even changing the effective size of the block device at runtime.
Sometimes small, single line code change hides behind it a complicated
story. This is one of those times.
If you look at this diff, you may note that this is a case of
lfs_dir_fetchmatch not correctly handling a tag that invalidates a
callback used to search for some condition, in this case a search for a
parent, which is invalidated by a later dir tag overwritting the
previous dir pair.
But how can this happen? Dir-pair-tags are only overwritten during
relocations (when a block goes bad or exceeds the block_cycles config
option for dynamic wear-leveling). Other dir operations create new
directory entries. And the only lfs_dir_fetchmatch condition that relies
on overwrites (as opposed to proper deletes) is when we need to find a
directory's parent, an operation that only occurs during a _different_
relocation. And a false _positive_, can only happen if we don't have a
parent. Which is really unlikely when we search for directory parents!
This bug and minimal test case was found by Matthew Renzelmann. In a
unfortunate series of events, first a file creation causes a directory
split to occur. This creates a new, orphaned metadata-pair containing
our new file. However, the revision count on this metadata-pair
indicates the pair is due for relocation as a part of wear-leveling.
Normally, this is fine, even though this metadata-pair has no parent,
the lfs_dir_find should return ENOENT and continue without error.
However, here we get hit by our fetchmatch bug. A previous, unrelated
relocation overwrites a pair which just happens to contain the block
allocated for a new metadata-pair. When we search for a parent,
lfs_dir_fetchmatch incorrectly finds this old, outdated metadata pair
and incorrectly tells our orphan it's found its parent.
As you can imagine the orphan's dissapointment must be immense.
So an unfortunately timed dir split triggers a relocation which
incorrectly finds a previously written parent that has been outdated
by another relocation.
As a solution we can outdate our found tag if it is overwritten by
an exact match during lfs_dir_fetchmatch.
As a part of this I started adding a new set of tests: tests/test_relocations,
for aggressive relocations tests. This is already by appended to by
another PR. I suspect relocations is relatively under-tested and is
becoming more important due to recent improvements in wear-leveling.
The superblock entry takes up id 0 in the root directory (not all
entries are files, though currently the superblock is the only
exception). Normally, reading a directory correctly skips the
superblock and only reports non-superblock files.
However, this doesn't work perfectly for lfs_dir_seek, which tries
to be clever to not touch the disk.
Fortunately, we can fix this by adding an offset for the superblock.
This will only work while the superblock is the only non-file entry,
otherwise we would need to touch the disk to properly seek in a
directory (though we already touch the disk a bit to get dir-tails
during seeks).
Found by jhartika
Stop proactively relocate blocks during migrations, this can cause a number of
failure states such: clobbering the v1 superblock if we relocate root, and
invalidating directory pointers if we relocate the head of a directory. On top
of this, relocations increase the overall complexity of lfs_migration, which is
already a delicate operation.
This is caused by dir->head not being updated when dir->m.pair may be.
This causes the two to fall out of sync and later dir rewinds to fail.
This bug stems all the way back from the first commits of littlefs, so
it's surprising it has avoided detection for this long. Perhaps because
lfs_dir_rewind is not used often.
To ensure 16 bit devices do not invalidly truncate lfs_file_write return codes, change
the return variable to be lfs_ssize_t which is the lfs_file_write return code and
cast to int if it is a negative error code.
lfs_dir_find returns either a negative return code or a tag.
For 32 bit machines with int as 32 bits this co-incides, but for smaller
bit processors, we need to ensure a 32 bit value is returned so change
the return type to lfs_stag_t.
Build warnings exist on a gcc based 16 bit compiler. Cast relevant types
to fix.
littlefs/lfs.c: In function 'lfs_gstate_xororphans':
littlefs/lfs.c:355:5: warning: left shift count >= width of type
littlefs/lfs.c: In function 'lfs_dir_fetchmatch':
littlefs/lfs.c:849:17: warning: left shift count >= width of type
littlefs/lfs.c: In function 'lfs_dir_commitcrc':
littlefs/lfs.c:1278:9: warning: left shift count >= width of type
When using lfs_file_truncate() to make a file shorter the file block and
off were incorrectly positioned at the new end, resulting in invalid
data accessed when reading. Lift the seek pointer restoration to apply
to both increasing and reducing truncates.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The difference between 0xffffffff and 0xfffffffe is too subtle. Use
names that reflect what the value represents.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Found during testing, the issue was with lfs_migrate in combination with
wear leveling.
Normally, we can expect lfs_migrate to be able to respect the user-configured
block_cycles. It already has allocation information on which blocks are
used by both v1 and v2, so it should be safe to relocate blocks as
needed.
However, this fell apart when root was relocated. If lfs_migrate found a
root that needed migration, it would happily relocate the root. This
would normally be fine, except relocating the root has a side-effect of
needed to update the superblock. Which, during migration, is in a
delicate state of containing both v1's and v2's superblocks in the same
metadata pair. If the superblock ends up needing to compact, this would
clobber the v1 superblock and corrupt the filesystem during migration.
The best fix I could come up with is to specifically dissallow migrating the
root directory during migration. Fortunately this is behind the
LFS_MIGRATE macro, so the code cost for this check is not normally paid.
Due to the logging nature of metadata pairs, switching from inline files
(type3 = 0x201) to CTZ skip-lists (type3 = 0x202) does not explicitly
erase inline files, but instead leaves them up to compaction to omit.
To save code size, this is handled by the same logic that deduplicates
tags.
Unfortunately, this wasn't working. Due to a relatively late change in v2
the struct's type field was changed to no longer be a part of determining a
tag's "uniqueness". A part of this should have been the modification of
directory traversal filtering to respect type-dependent uniqueness, but
I missed this.
The fix is to add in correct type-dependent filtering. Also there was
some clean up necessary around removing delete tags during compaction
and outlining files.
Note that while this appears to conflict with the possibility of
combining inline + ctz files, we still have the device-side-only
LFS_TYPE_FROM tag that can be repurposed for 256 additional inline
"chunks".
Found by Johnxjj
Previously these returned LFS_ERR_BADF. But attempting to modify a file
opened read-only, or reading a write-only flie, is a user error and
should not occur in normal use.
Changing this to an assert allows the logic to be omitted if the user
disables asserts to reduce the code footprint (not suggested unless the
user really really knows what they're doing).
