Odstraneni HTML5 validatoru

examples/WiFiConfig_simple_test/WiFiConfig_simple_test.ino

@@ -4,6 +4,7 @@
 #include <EEPROM.h>
 #include <ESP8266NetBIOS.h>
 #include <WiFiConfig.h>
+#include <encipheredEEPROMStrings.h>
 
 // Plati pro desticku Witty s modulem ESP-12E
 #define PIN_FORCE_CONFIG 4
@@ -14,6 +15,19 @@
 //#define DEBUG_OUT(a) {}
 #define DEBUG_OUT(a) Serial.print(a)
 
+// Definice obsazeni EEPROM
+#define elementSize(type, element) sizeof(((type *)0)->element)
+#define countof(a) (sizeof(a) / sizeof(a[0]))
+typedef struct
+{
+  char devname[32 + 2]; // jmeno zarizeni (pro NBNS plati jen 16 znaku)
+} eepromconfig_t;
+
+#define EEPROM_SIZE (sizeof(wificonfigarea_t) + sizeof(eepromconfig_t) + 10) // velikost EEPROM oblasti (POZOR!!! zbytecnym zvetsovanim se zaroven zmensuje velikost RAM kvuli zrcadlu!!!)
+#define EEPROM_WIFICONFIG_ORIGIN (EEPROM_SIZE - sizeof(wificonfigarea_t)) // pocatek oblasti, pouzivane WiFiConfig (alokovano odzadu)
+#define EEPROM_CONFIG_ORIGIN (0)
+
+char WiFiDeviceName[elementSize(eepromconfig_t, devname)]; // misto pro jmeno zarizeni (dodane do DNS, DHCP NBNS apod...)
 ESP8266WebServer wwwserver(80); // webovy server
 String content;
 
@@ -52,23 +66,27 @@ void ICACHE_FLASH_ATTR wcb(wificonfigstate_t state)
   }
 }
 
-void saveServer(const char *param)
+void ICACHE_FLASH_ATTR saveDevname(const char *param)
 {
+  String p = param;
 
-  DEBUG_OUT(param);
+  EES_storeString(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, devname), elementSize(eepromconfig_t, devname), p);
 }
 
 void ICACHE_FLASH_ATTR setup()
 {
   WiFiConfig wifi; // konfigurace ESP modulu
-  WiFiConfigUsrParameter testOnly("server", "adresa serveru", "Default server", 32, saveServer);
+  WiFiConfigUsrParameter devname("devname", "Jméno zařízení", (const char *)WiFiDeviceName, 32, saveDevname);
 
-  EEPROM.begin(512); // zahajujeme praci s EEPROM
+  EEPROM.begin(EEPROM_SIZE); // zahajujeme praci s EEPROM
   pinMode(PIN_FORCE_CONFIG, INPUT_PULLUP); // pin, co slouzi jako vstup tlacitka
   int fc = digitalRead(PIN_FORCE_CONFIG); // pozadavek na vynucene vyvolani konfigurace
   Serial.begin(9600);
-  wifi.addParameter(&testOnly);
-  if (WCR_OK != wifi.begin(0, fc, wcb)) // startujeme pripojeni
+  String dn = EES_readString(EEPROM_CONFIG_ORIGIN + offsetof(eepromconfig_t, devname), elementSize(eepromconfig_t, devname));
+  strcpy(WiFiDeviceName, dn.c_str());
+  wifi.addParameter(&devname);
+
+  if (WCR_OK != wifi.begin(EEPROM_WIFICONFIG_ORIGIN, fc, wcb)) // startujeme pripojeni
     ESP.restart();
 
   wwwserver.on("/", handleRoot);

library.json

@@ -12,7 +12,7 @@
     "type": "git",
     "url": "http://git.xpablo.cz/pablo2048/WiFiConfig.git"
   },
-  "version": "6.0",
+  "version": "6.3.1",
   "license": "MIT",
   "frameworks": "arduino",
   "platforms": ["espressif8266", "espressif32"],

library.properties

@@ -1,5 +1,5 @@
 name=WiFiConfig
-version=6.0
+version=6.3.1
 author=Pavel Brychta
 maintainer=Pavel Brychta <Pablo@xpablo.cz>
 sentence=Enables seamless module configuration.

src/WiFiConfig.cpp

@@ -1,4 +1,9 @@
 /*
+ * V6.3.1- 1.9.2019 - Odstraneni HTML5 validatoru - delaly akorat problemy anedala se ulozit konfigurace i kdyz byly polozky skryty
+ *
+ * V6.3 - 12.8.2019 - IP adresa Captive portalu je zmenena na 172.217.28.1 kvuli funkcnosti na Android zarizenich (viz. zmena zde https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortal/CaptivePortal.ino)
+ *             ladici vypis pri zachyceni presmerovani v Captive portalu.
+ *
  * V6.2 - 12.12.2018- Nastaveni jmena zarizeni nadale NENI soucasti WiFiConfig a je treba ho pridat jako uzivatelsky parametr. Je to proto, protoze
  *             se ukazalo, ze neni dobre z externiho kodu sahat do vnitrni struktury WiFiConfig (napr. pri ukladani noveho jmena).
  *
@@ -21,7 +26,7 @@
  *
  * V5.3 - 8.12.2017 - prepracovano presmerovani v Captive portalu, DEBUG_MSG makro upraveno na posledni pouzivanou verzi, scitani retezcu prepracovano na .concat. Pripsany Informace o modulu, reakce na Reset
  *
- * V5.2 - 20.4.2017 - Pokud je pouzite v timeoutu EC_DONT_RUN_CONFIGAP tak se vracime okamzite a necekame na pripojeni k WiFi (take nevolame zadnou callback metodu).
+ * V5.2 - 20.4.2017 - Pokud je pouzite v timeoutu WC_DONT_RUN_CONFIGAP tak se vracime okamzite a necekame na pripojeni k WiFi (take nevolame zadnou callback metodu).
  *            Navratovy kod je pak WCR_CONFIGAP_NOT_STARTED .
  *
  * V5.1 - 3.4.2017  - Webove rozhrani upravene pro snadnejsi ovladani na telefonu/tabletu, sila signalu AP zobrazena jako barevne odliseny indikator.
@@ -313,7 +318,13 @@ void WiFiConfig::_handleNotFound(void)
   }
   else
   {
-    server->sendHeader(F("Location"), String(F("http://")) + server->client().localIP().toString() + String(F("/index.htm")), true);
+    String redirect;
+    redirect.reserve(256);
+    redirect = F("http://");
+    redirect.concat(server->client().localIP().toString());
+    redirect.concat(F("/index.htm"));
+    DEBUG_MSG("Redirection to: %s\r\n", redirect.c_str());
+    server->sendHeader(F("Location"), redirect, true);
     server->send_P(302, TEXTPLAIN, PSTR("Redirect"));
   }
 }
@@ -697,7 +708,7 @@ wificonfigresult_t WiFiConfig::_setupAP(wificonfig_cb cb)
 #endif
 
   /* Soft AP network parameters */
-  IPAddress apIP(192, 168, 4, 1);
+  IPAddress apIP(172, 217, 28, 1);
   IPAddress netMsk(255, 255, 255, 0);
 
   WiFi.disconnect(); // pro jistotu se odpojime
@@ -759,7 +770,7 @@ bool WiFiConfig::_testWifi(wificonfig_cb cb)
 // nakonfigurujeme ESP dle nove nastavenych parametru
   WiFi.disconnect(); // vsechno odpojime
 
-  s = EES_readString(configBase + offsetof(wificonfigarea_t, ssid), elementSize(wificonfigarea_t, ssid));
+  String s = EES_readString(configBase + offsetof(wificonfigarea_t, ssid), elementSize(wificonfigarea_t, ssid));
   String pass =  EES_readString(configBase + offsetof(wificonfigarea_t, pass), elementSize(wificonfigarea_t, pass));
 
   switch (EEPROM.read(configBase + offsetof(wificonfigarea_t, mode)))
@@ -893,6 +904,14 @@ wificonfigresult_t WiFiConfig::begin(int configarea, int forceConfigure, wificon
         if (cb)
           cb(WCS_CONNECTSTART); // signalizujeme zacatek pokusu o pripojeni (zde se nic jineho stejne nestane...)
         break;
+
+#if !defined(ESP8266)
+      default:
+        DEBUG_MSG("Wrong config (%d)\r\n", EEPROM.read(configBase + offsetof(wificonfigarea_t, mode)));
+        _status = 0xfe;
+        result = _setupAP(cb);
+      break;
+#endif
       }
     }
   }
@@ -904,6 +923,8 @@ wificonfigresult_t WiFiConfig::begin(int configarea, int forceConfigure, int tim
 
   if ((timeout > 0) && (40 > timeout))
     timeout = 40; // timeout musi byt minimalne 40 sekund
+  if ((0 == forceConfigure) && (WC_DONT_RUN_CONFIGAP == timeout))
+    timeout = 40;
   _timeout = timeout;
   if (_timeout > 0)
     _time = millis() + (_timeout * 1000); // spocitame si novy cas, kdy budeme modul restartovat

src/embHTML.h

@@ -58,10 +58,10 @@ static const char PAGE_INDEX2[] PROGMEM = R"=====(
 <div>
 <label><input id='_st' name='_st' type='checkbox' style="width: 10%; float: left; margin-top: 5px;" onclick='hSC();' {c}>Statická IP konfigurace</label>
 <div id="staticip">
-<label>IP adresa<br><input type="text" name="_i" pattern='((^|\.)((25[0-5])|(2[0-4]\d)|(1\d\d)|([1-9]?\d))){4}$' title='ip adresa ve formatu <cislo>.<cislo>.<cislo>.<cislo>' value='{i}'></label><br>
-<label>Síťová maska<br><input type="text" name="_m" pattern='((^|\.)((25[0-5])|(2[0-4]\d)|(1\d\d)|([1-9]?\d))){4}$' title='ip adresa ve formatu <cislo>.<cislo>.<cislo>.<cislo>' value='{m}'></label><br>
-<label>Síťová brána<br><input type="text" name="_g" pattern='((^|\.)((25[0-5])|(2[0-4]\d)|(1\d\d)|([1-9]?\d))){4}$' title='ip adresa ve formatu <cislo>.<cislo>.<cislo>.<cislo>' value='{g}'></label><br>
-<label>Server DNS<br><input type="text" name="_d" pattern='((^|\.)((25[0-5])|(2[0-4]\d)|(1\d\d)|([1-9]?\d))){4}$' title='ip adresa ve formatu <cislo>.<cislo>.<cislo>.<cislo>' value='{d}'></label><br>
+<label>IP adresa<br><input type="text" name="_i" value='{i}'></label><br>
+<label>Síťová maska<br><input type="text" name="_m" value='{m}'></label><br>
+<label>Síťová brána<br><input type="text" name="_g" value='{g}'></label><br>
+<label>Server DNS<br><input type="text" name="_d" value='{d}'></label><br>
 </div>
 </div>
 <script>hAP();hSC();</script>