WIP
This commit is contained in:
637
Makefile
Normal file
637
Makefile
Normal file
@ -0,0 +1,637 @@
|
||||
# Makefile for ATmegaBOOT
|
||||
# E.Lins, 18.7.2005
|
||||
# $Id$
|
||||
#
|
||||
# Instructions
|
||||
#
|
||||
# To make bootloader .hex file:
|
||||
# make diecimila
|
||||
# make lilypad
|
||||
# make ng
|
||||
# etc...
|
||||
#
|
||||
# To burn bootloader .hex file:
|
||||
# make diecimila_isp
|
||||
# make lilypad_isp
|
||||
# make ng_isp
|
||||
# etc...
|
||||
#
|
||||
# Edit History
|
||||
# 201303xx: WestfW: Major Makefile restructuring.
|
||||
# Allows options on Make command line "make xx LED=B3"
|
||||
# (see also pin_defs.h)
|
||||
# Divide into "chip" targets and "board" targets.
|
||||
# Most boards are (recursive) board targets with options.
|
||||
# Move isp target to separate makefile (fixes m8 EFUSE)
|
||||
# Some (many) targets will now be rebuilt when not
|
||||
# strictly necessary, so that options will be included.
|
||||
# (any "make" with options will always compile.)
|
||||
# Set many variables with ?= so they can be overridden
|
||||
# Use arduinoISP settings as default for ISP targets
|
||||
#
|
||||
|
||||
#----------------------------------------------------------------------
|
||||
#
|
||||
# program name should not be changed...
|
||||
PROGRAM = optiboot
|
||||
|
||||
# The default behavior is to build using tools that are in the users
|
||||
# current path variables, but we can also build using an installed
|
||||
# Arduino user IDE setup, or the Arduino source tree.
|
||||
# Uncomment this next lines to build within the arduino environment,
|
||||
# using the arduino-included avrgcc toolset (mac and pc)
|
||||
# ENV ?= arduino
|
||||
# ENV ?= arduinodev
|
||||
# OS ?= macosx
|
||||
# OS ?= windows
|
||||
|
||||
# export symbols to recursive makes (for ISP)
|
||||
export
|
||||
|
||||
# defaults
|
||||
MCU_TARGET = atmega168
|
||||
LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe
|
||||
|
||||
# Build environments
|
||||
# Start of some ugly makefile-isms to allow optiboot to be built
|
||||
# in several different environments. See the README.TXT file for
|
||||
# details.
|
||||
|
||||
# default
|
||||
fixpath = $(1)
|
||||
|
||||
ifeq ($(ENV), arduino)
|
||||
# For Arduino, we assume that we're connected to the optiboot directory
|
||||
# included with the arduino distribution, which means that the full set
|
||||
# of avr-tools are "right up there" in standard places.
|
||||
TOOLROOT = ../../../tools
|
||||
GCCROOT = $(TOOLROOT)/avr/bin/
|
||||
|
||||
ifeq ($(OS), windows)
|
||||
# On windows, SOME of the tool paths will need to have backslashes instead
|
||||
# of forward slashes (because they use windows cmd.exe for execution instead
|
||||
# of a unix/mingw shell?) We also have to ensure that a consistent shell
|
||||
# is used even if a unix shell is installed (ie as part of WINAVR)
|
||||
fixpath = $(subst /,\,$1)
|
||||
SHELL = cmd.exe
|
||||
endif
|
||||
|
||||
else ifeq ($(ENV), arduinodev)
|
||||
# Arduino IDE source code environment. Use the unpacked compilers created
|
||||
# by the build (you'll need to do "ant build" first.)
|
||||
ifeq ($(OS), macosx)
|
||||
TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools
|
||||
endif
|
||||
ifeq ($(OS), windows)
|
||||
TOOLROOT = ../../../../build/windows/work/hardware/tools
|
||||
endif
|
||||
|
||||
GCCROOT = $(TOOLROOT)/avr/bin/
|
||||
AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
|
||||
|
||||
else
|
||||
GCCROOT =
|
||||
AVRDUDE_CONF =
|
||||
endif
|
||||
|
||||
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
|
||||
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
|
||||
-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
|
||||
STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
|
||||
#
|
||||
# End of build environment code.
|
||||
|
||||
|
||||
OBJ = $(PROGRAM).o
|
||||
OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
|
||||
|
||||
DEFS =
|
||||
LIBS =
|
||||
|
||||
CC = $(GCCROOT)avr-gcc
|
||||
|
||||
# Override is only needed by avr-lib build system.
|
||||
|
||||
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
|
||||
override LDFLAGS = $(LDSECTIONS) -Wl,--relax -nostartfiles -nostdlib
|
||||
#-Wl,--gc-sections
|
||||
|
||||
OBJCOPY = $(GCCROOT)avr-objcopy
|
||||
OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump)
|
||||
|
||||
SIZE = $(GCCROOT)avr-size
|
||||
|
||||
#
|
||||
# Make command-line Options.
|
||||
# Permit commands like "make atmega328 LED_START_FLASHES=10" to pass the
|
||||
# appropriate parameters ("-DLED_START_FLASHES=10") to gcc
|
||||
#
|
||||
|
||||
ifdef BAUD_RATE
|
||||
BAUD_RATE_CMD = -DBAUD_RATE=$(BAUD_RATE)
|
||||
dummy = FORCE
|
||||
else
|
||||
BAUD_RATE_CMD = -DBAUD_RATE=115200
|
||||
endif
|
||||
|
||||
ifdef LED_START_FLASHES
|
||||
LED_START_FLASHES_CMD = -DLED_START_FLASHES=$(LED_START_FLASHES)
|
||||
dummy = FORCE
|
||||
else
|
||||
LED_START_FLASHES_CMD = -DLED_START_FLASHES=3
|
||||
endif
|
||||
|
||||
# BIG_BOOT: Include extra features, up to 1K.
|
||||
ifdef BIGBOOT
|
||||
BIGBOOT_CMD = -DBIGBOOT=1
|
||||
dummy = FORCE
|
||||
endif
|
||||
|
||||
ifdef SOFT_UART
|
||||
SOFT_UART_CMD = -DSOFT_UART=1
|
||||
dummy = FORCE
|
||||
endif
|
||||
|
||||
ifdef LED_DATA_FLASH
|
||||
LED_DATA_FLASH_CMD = -DLED_DATA_FLASH=1
|
||||
dummy = FORCE
|
||||
endif
|
||||
|
||||
ifdef LED
|
||||
LED_CMD = -DLED=$(LED)
|
||||
dummy = FORCE
|
||||
endif
|
||||
|
||||
ifdef SINGLESPEED
|
||||
SSCMD = -DSINGLESPEED=1
|
||||
endif
|
||||
|
||||
COMMON_OPTIONS = $(BAUD_RATE_CMD) $(LED_START_FLASHES_CMD) $(BIGBOOT_CMD)
|
||||
COMMON_OPTIONS += $(SOFT_UART_CMD) $(LED_DATA_FLASH_CMD) $(LED_CMD) $(SSCMD)
|
||||
|
||||
#UART is handled separately and only passed for devices with more than one.
|
||||
ifdef UART
|
||||
UARTCMD = -DUART=$(UART)
|
||||
endif
|
||||
|
||||
# Not supported yet
|
||||
# ifdef SUPPORT_EEPROM
|
||||
# SUPPORT_EEPROM_CMD = -DSUPPORT_EEPROM
|
||||
# dummy = FORCE
|
||||
# endif
|
||||
|
||||
# Not supported yet
|
||||
# ifdef TIMEOUT_MS
|
||||
# TIMEOUT_MS_CMD = -DTIMEOUT_MS=$(TIMEOUT_MS)
|
||||
# dummy = FORCE
|
||||
# endif
|
||||
#
|
||||
|
||||
#---------------------------------------------------------------------------
|
||||
# "Chip-level Platform" targets.
|
||||
# A "Chip-level Platform" compiles for a particular chip, but probably does
|
||||
# not have "standard" values for things like clock speed, LED pin, etc.
|
||||
# Makes for chip-level platforms should usually explicitly define their
|
||||
# options like: "make atmega1285 AVR_FREQ=16000000L LED=D0"
|
||||
#---------------------------------------------------------------------------
|
||||
#
|
||||
# Note about fuses:
|
||||
# the efuse should really be 0xf8; since, however, only the lower
|
||||
# three bits of that byte are used on the atmega168, avrdude gets
|
||||
# confused if you specify 1's for the higher bits, see:
|
||||
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
|
||||
#
|
||||
# similarly, the lock bits should be 0xff instead of 0x3f (to
|
||||
# unlock the bootloader section) and 0xcf instead of 0x2f (to
|
||||
# lock it), but since the high two bits of the lock byte are
|
||||
# unused, avrdude would get confused.
|
||||
#---------------------------------------------------------------------------
|
||||
#
|
||||
|
||||
# Test platforms
|
||||
# Virtual boot block test
|
||||
virboot328: TARGET = atmega328
|
||||
virboot328: MCU_TARGET = atmega328p
|
||||
virboot328: CFLAGS += $(COMMON_OPTIONS) '-DVIRTUAL_BOOT'
|
||||
virboot328: AVR_FREQ ?= 16000000L
|
||||
virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
|
||||
virboot328: $(PROGRAM)_atmega328.hex
|
||||
virboot328: $(PROGRAM)_atmega328.lst
|
||||
|
||||
# Diecimila, Duemilanove with m168, and NG use identical bootloaders
|
||||
# Call it "atmega168" for generality and clarity, keep "diecimila" for
|
||||
# backward compatibility of makefile
|
||||
#
|
||||
atmega168: TARGET = atmega168
|
||||
atmega168: MCU_TARGET = atmega168
|
||||
atmega168: CFLAGS += $(COMMON_OPTIONS)
|
||||
atmega168: AVR_FREQ ?= 16000000L
|
||||
atmega168: $(PROGRAM)_atmega168.hex
|
||||
atmega168: $(PROGRAM)_atmega168.lst
|
||||
|
||||
atmega168_isp: atmega168
|
||||
atmega168_isp: TARGET = atmega168
|
||||
# 2.7V brownout
|
||||
atmega168_isp: HFUSE ?= DD
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega168_isp: LFUSE ?= FF
|
||||
# 512 byte boot
|
||||
atmega168_isp: EFUSE ?= 04
|
||||
atmega168_isp: isp
|
||||
|
||||
atmega328: TARGET = atmega328
|
||||
atmega328: MCU_TARGET = atmega328p
|
||||
atmega328: CFLAGS += $(COMMON_OPTIONS)
|
||||
atmega328: AVR_FREQ ?= 16000000L
|
||||
atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7c00 -Wl,--section-start=.version=0x7ffe
|
||||
atmega328: $(PROGRAM)_atmega328.hex
|
||||
atmega328: $(PROGRAM)_atmega328.lst
|
||||
|
||||
atmega328_isp: atmega328
|
||||
atmega328_isp: TARGET = atmega328
|
||||
atmega328_isp: MCU_TARGET = atmega328p
|
||||
# 512 byte boot, SPIEN
|
||||
atmega328_isp: HFUSE ?= DE
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega328_isp: LFUSE ?= FF
|
||||
# 2.7V brownout
|
||||
atmega328_isp: EFUSE ?= FD
|
||||
atmega328_isp: isp
|
||||
|
||||
atmega644p: TARGET = atmega644p
|
||||
atmega644p: MCU_TARGET = atmega644p
|
||||
atmega644p: CFLAGS += $(COMMON_OPTIONS) -DBIGBOOT $(LED_CMD)
|
||||
atmega644p: AVR_FREQ ?= 16000000L
|
||||
atmega644p: LDSECTIONS = -Wl,--section-start=.text=0xfc00 -Wl,--section-start=.version=0xfffe
|
||||
atmega644p: CFLAGS += $(UARTCMD)
|
||||
atmega644p: $(PROGRAM)_atmega644p.hex
|
||||
atmega644p: $(PROGRAM)_atmega644p.lst
|
||||
|
||||
atmega1284: TARGET = atmega1284p
|
||||
atmega1284: MCU_TARGET = atmega1284p
|
||||
atmega1284: CFLAGS += $(COMMON_OPTIONS) -DBIGBOOT $(LED_CMD)
|
||||
atmega1284: AVR_FREQ ?= 16000000L
|
||||
atmega1284: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 -Wl,--section-start=.version=0x1fffe
|
||||
atmega1284: CFLAGS += $(UARTCMD)
|
||||
atmega1284: $(PROGRAM)_atmega1284p.hex
|
||||
atmega1284: $(PROGRAM)_atmega1284p.lst
|
||||
|
||||
atmega1284p: atmega1284
|
||||
|
||||
atmega1284_isp: atmega1284
|
||||
atmega1284_isp: TARGET = atmega1284p
|
||||
atmega1284_isp: MCU_TARGET = atmega1284p
|
||||
# 1024 byte boot
|
||||
atmega1284_isp: HFUSE ?= DE
|
||||
# Full Swing xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega1284_isp: LFUSE ?= F7
|
||||
# 2.7V brownout
|
||||
atmega1284_isp: EFUSE ?= FD
|
||||
atmega1284_isp: isp
|
||||
|
||||
#Atmega1280
|
||||
atmega1280: MCU_TARGET = atmega1280
|
||||
atmega1280: CFLAGS += $(COMMON_OPTIONS) -DBIGBOOT $(UART_CMD)
|
||||
atmega1280: AVR_FREQ ?= 16000000L
|
||||
atmega1280: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 -Wl,--section-start=.version=0x1fffe
|
||||
atmega1280: $(PROGRAM)_atmega1280.hex
|
||||
atmega1280: $(PROGRAM)_atmega1280.lst
|
||||
|
||||
|
||||
# ATmega8
|
||||
#
|
||||
atmega8: TARGET = atmega8
|
||||
atmega8: MCU_TARGET = atmega8
|
||||
atmega8: CFLAGS += $(COMMON_OPTIONS)
|
||||
atmega8: AVR_FREQ ?= 16000000L
|
||||
atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
|
||||
atmega8: $(PROGRAM)_atmega8.hex
|
||||
atmega8: $(PROGRAM)_atmega8.lst
|
||||
|
||||
atmega8_isp: atmega8
|
||||
atmega8_isp: TARGET = atmega8
|
||||
atmega8_isp: MCU_TARGET = atmega8
|
||||
# SPIEN, CKOPT (for full swing xtal), Bootsize=512B
|
||||
atmega8_isp: HFUSE ?= CC
|
||||
# 2.7V brownout, 16MHz Xtal, 16KCK/14CK+65ms
|
||||
atmega8_isp: LFUSE ?= BF
|
||||
atmega8_isp: isp
|
||||
|
||||
# ATmega88
|
||||
#
|
||||
atmega88: TARGET = atmega88
|
||||
atmega88: MCU_TARGET = atmega88
|
||||
atmega88: CFLAGS += $(COMMON_OPTIONS)
|
||||
atmega88: AVR_FREQ ?= 16000000L
|
||||
atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
|
||||
atmega88: $(PROGRAM)_atmega88.hex
|
||||
atmega88: $(PROGRAM)_atmega88.lst
|
||||
|
||||
atmega88_isp: atmega88
|
||||
atmega88_isp: TARGET = atmega88
|
||||
atmega88_isp: MCU_TARGET = atmega88
|
||||
# 2.7V brownout
|
||||
atmega88_isp: HFUSE ?= DD
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atemga88_isp: LFUSE ?= FF
|
||||
# 512 byte boot
|
||||
atmega88_isp: EFUSE ?= 04
|
||||
atmega88_isp: isp
|
||||
|
||||
atmega32: TARGET = atmega32
|
||||
atmega32: MCU_TARGET = atmega32
|
||||
atmega32: CFLAGS += $(COMMON_OPTIONS)
|
||||
atmega32: AVR_FREQ ?= 11059200L
|
||||
atmega32: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
|
||||
atmega32: $(PROGRAM)_atmega32.hex
|
||||
atmega32: $(PROGRAM)_atmega32.lst
|
||||
|
||||
atmega32_isp: atmega32
|
||||
atmega32_isp: TARGET = atmega32
|
||||
atmega32_isp: MCU_TARGET = atmega32
|
||||
# No OCD or JTAG, SPIEN, CKOPT (for full swing xtal), Bootsize=512B
|
||||
atmega32_isp: HFUSE ?= CE
|
||||
# 2.7V brownout, 16MHz Xtal, 16KCK/14CK+65ms
|
||||
atemga32_isp: LFUSE ?= BF
|
||||
atmega32_isp: isp
|
||||
|
||||
|
||||
|
||||
#---------------------------------------------------------------------------
|
||||
# "Board-level Platform" targets.
|
||||
# A "Board-level Platform" implies a manufactured platform with a particular
|
||||
# AVR_FREQ, LED, and so on. Parameters are not particularly changable from
|
||||
# the "make" command line.
|
||||
# Most of the board-level platform builds should envoke make recursively
|
||||
# appropriate specific options
|
||||
#---------------------------------------------------------------------------
|
||||
# 20MHz clocked platforms
|
||||
#
|
||||
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
|
||||
#
|
||||
|
||||
pro20: TARGET = pro_20mhz
|
||||
pro20: CHIP = atmega168
|
||||
pro20:
|
||||
$(MAKE) atmega168 AVR_FREQ=20000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
pro20_isp: pro20
|
||||
pro20_isp: TARGET = pro_20mhz
|
||||
# 2.7V brownout
|
||||
pro20_isp: HFUSE ?= DD
|
||||
# Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro20_isp: LFUSE ?= C6
|
||||
# 512 byte boot
|
||||
pro20_isp: EFUSE ?= 04
|
||||
pro20_isp: isp
|
||||
|
||||
# 16MHz clocked platforms
|
||||
#
|
||||
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
|
||||
#
|
||||
|
||||
pro16: TARGET = pro_16MHz
|
||||
pro16: CHIP = atmega168
|
||||
pro16:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=16000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
pro16_isp: pro16
|
||||
pro16_isp: TARGET = pro_16MHz
|
||||
# 2.7V brownout
|
||||
pro16_isp: HFUSE ?= DD
|
||||
# Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro16_isp: LFUSE ?= C6
|
||||
# 512 byte boot
|
||||
pro16_isp: EFUSE ?= 04
|
||||
pro16_isp: isp
|
||||
|
||||
diecimila: TARGET = diecimila
|
||||
diecimila: CHIP = atmega168
|
||||
diecimila:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=16000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
diecimila_isp: diecimila
|
||||
diecimila_isp: TARGET = diecimila
|
||||
# 2.7V brownout
|
||||
diecimila_isp: HFUSE ?= DD
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
diecimila_isp: LFUSE ?= FF
|
||||
# 512 byte boot
|
||||
diecimila_isp: EFUSE ?= 04
|
||||
diecimila_isp: isp
|
||||
|
||||
# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions
|
||||
#
|
||||
sanguino: TARGET = $@
|
||||
sanguino: CHIP = atmega644p
|
||||
sanguino:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=16000000L LED=B0
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
sanguino_isp: sanguino
|
||||
sanguino_isp: TARGET = sanguino
|
||||
sanguino_isp: MCU_TARGET = atmega644p
|
||||
# 1024 byte boot
|
||||
sanguino_isp: HFUSE ?= DE
|
||||
# Full swing xtal (16MHz) 16KCK/14CK+65ms
|
||||
sanguino_isp: LFUSE ?= F7
|
||||
# 2.7V brownout
|
||||
sanguino_isp: EFUSE ?= FD
|
||||
sanguino_isp: isp
|
||||
|
||||
mighty1284: TARGET = $@
|
||||
mighty1284: CHIP = atmega1284p
|
||||
mighty1284:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=16000000L LED=D7
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
mighty1284_isp: mighty1284
|
||||
mighty1284_isp: TARGET = mighty1284
|
||||
mighty1284_isp: MCU_TARGET = atmega1284p
|
||||
# 1024 byte boot
|
||||
mighty1284_isp: HFUSE ?= DE
|
||||
# Full swing xtal (16MHz) 16KCK/14CK+65ms
|
||||
mighty1284_isp: LFUSE ?= F7
|
||||
# 2.7V brownout
|
||||
mighty1284_isp: EFUSE ?= FD
|
||||
mighty1284_isp: isp
|
||||
|
||||
bobuino: TARGET = $@
|
||||
bobuino: CHIP = atmega1284p
|
||||
bobuino:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=16000000L LED=B5
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
bobuino_isp: bobuino
|
||||
bobuino_isp: TARGET = bobuino
|
||||
bobuino_isp: MCU_TARGET = atmega1284p
|
||||
# 1024 byte boot
|
||||
bobuino_isp: HFUSE ?= DE
|
||||
# Full swing xtal (16MHz) 16KCK/14CK+65ms
|
||||
bobuino_isp: LFUSE ?= F7
|
||||
# 2.7V brownout
|
||||
bobuino_isp: EFUSE ?= FD
|
||||
bobuino_isp: isp
|
||||
|
||||
# MEGA1280 Board (this is different from the atmega1280 chip platform)
|
||||
# Mega has a minimum boot size of 1024 bytes, so enable extra functions
|
||||
# Note that optiboot does not (can not) work on the MEGA2560
|
||||
#mega: TARGET = atmega1280
|
||||
mega1280: atmega1280
|
||||
|
||||
|
||||
mega1280_isp: mega1280
|
||||
mega1280_isp: TARGET = atmega1280
|
||||
mega1280_isp: MCU_TARGET = atmega1280
|
||||
# 1024 byte boot
|
||||
mega1280_isp: HFUSE ?= DE
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
mega1280_isp: LFUSE ?= FF
|
||||
# 2.7V brownout; wants F5 for some reason...
|
||||
mega1280_isp: EFUSE ?= F5
|
||||
mega1280_isp: isp
|
||||
|
||||
# 8MHz clocked platforms
|
||||
#
|
||||
# These are capable of 115200 baud
|
||||
# Note that "new" Arduinos with an AVR as USB/Serial converter will NOT work
|
||||
# with an 8MHz target Arduino. The bitrate errors are in opposite directions,
|
||||
# and total too large a number.
|
||||
#
|
||||
|
||||
lilypad: TARGET = $@
|
||||
lilypad: CHIP = atmega168
|
||||
lilypad:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=8000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
lilypad_isp: lilypad
|
||||
lilypad_isp: TARGET = lilypad
|
||||
# 2.7V brownout
|
||||
lilypad_isp: HFUSE ?= DD
|
||||
# Internal 8MHz osc (8MHz) Slow rising power
|
||||
lilypad_isp: LFUSE ?= E2
|
||||
# 512 byte boot
|
||||
lilypad_isp: EFUSE ?= 04
|
||||
lilypad_isp: isp
|
||||
|
||||
# lilypad_resonator is the same as a 8MHz lilypad, except for fuses.
|
||||
lilypad_resonator: lilypad
|
||||
|
||||
lilypad_resonator_isp: lilypad
|
||||
lilypad_resonator_isp: TARGET = lilypad
|
||||
# 2.7V brownout
|
||||
lilypad_resonator_isp: HFUSE ?= DD
|
||||
# Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
lilypad_resonator_isp: LFUSE ?= C6
|
||||
# 512 byte boot
|
||||
lilypad_resonator_isp: EFUSE ?= 04
|
||||
lilypad_resonator_isp: isp
|
||||
|
||||
pro8: TARGET = pro_8MHz
|
||||
pro8: CHIP = atmega168
|
||||
pro8:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=8000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
pro8_isp: pro8
|
||||
pro8_isp: TARGET = pro_8MHz
|
||||
# 2.7V brownout
|
||||
pro8_isp: HFUSE ?= DD
|
||||
# Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro8_isp: LFUSE ?= C6
|
||||
# 512 byte boot
|
||||
pro8_isp: EFUSE ?= 04
|
||||
pro8_isp: isp
|
||||
|
||||
atmega328_pro8: TARGET = atmega328_pro_8MHz
|
||||
atmega328_pro8: CHIP = atmega328
|
||||
atmega328_pro8:
|
||||
$(MAKE) $(CHIP) AVR_FREQ=8000000L LED_START_FLASHES=3
|
||||
mv $(PROGRAM)_$(CHIP).hex $(PROGRAM)_$(TARGET).hex
|
||||
mv $(PROGRAM)_$(CHIP).lst $(PROGRAM)_$(TARGET).lst
|
||||
|
||||
atmega328_pro8_isp: atmega328_pro8
|
||||
atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
|
||||
atmega328_pro8_isp: MCU_TARGET = atmega328p
|
||||
# 512 byte boot, SPIEN
|
||||
atmega328_pro8_isp: HFUSE ?= DE
|
||||
# Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega328_pro8_isp: LFUSE ?= FF
|
||||
# 2.7V brownout
|
||||
atmega328_pro8_isp: EFUSE ?= DE
|
||||
atmega328_pro8_isp: isp
|
||||
|
||||
# 1MHz clocked platforms
|
||||
#
|
||||
# These are capable of 9600 baud
|
||||
#
|
||||
|
||||
luminet: TARGET = luminet
|
||||
luminet: MCU_TARGET = attiny84
|
||||
luminet: CFLAGS += $(COMMON_OPTIONS) '-DSOFT_UART' '-DBAUD_RATE=9600'
|
||||
luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
|
||||
luminet: AVR_FREQ ?= 1000000L
|
||||
luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe
|
||||
luminet: $(PROGRAM)_luminet.hex
|
||||
luminet: $(PROGRAM)_luminet.lst
|
||||
|
||||
luminet_isp: luminet
|
||||
luminet_isp: TARGET = luminet
|
||||
luminet_isp: MCU_TARGET = attiny84
|
||||
# Brownout disabled
|
||||
luminet_isp: HFUSE ?= DF
|
||||
# 1MHz internal oscillator, slowly rising power
|
||||
luminet_isp: LFUSE ?= 62
|
||||
# Self-programming enable
|
||||
luminet_isp: EFUSE ?= FE
|
||||
luminet_isp: isp
|
||||
|
||||
|
||||
#---------------------------------------------------------------------------
|
||||
#
|
||||
# Generic build instructions
|
||||
#
|
||||
|
||||
FORCE:
|
||||
|
||||
baudcheck: FORCE
|
||||
- @$(CC) $(CFLAGS) -E baudcheck.c -o baudcheck.tmp.sh
|
||||
- @sh baudcheck.tmp.sh
|
||||
|
||||
isp: $(TARGET)
|
||||
$(MAKE) -f Makefile.isp isp TARGET=$(TARGET)
|
||||
|
||||
isp-stk500: $(PROGRAM)_$(TARGET).hex
|
||||
$(STK500-1)
|
||||
$(STK500-2)
|
||||
|
||||
%.elf: $(OBJ) baudcheck $(dummy)
|
||||
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $< $(LIBS)
|
||||
$(SIZE) $@
|
||||
|
||||
clean:
|
||||
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex *.tmp.sh
|
||||
|
||||
%.lst: %.elf
|
||||
$(OBJDUMP) -h -S $< > $@
|
||||
|
||||
%.hex: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@
|
||||
|
||||
%.srec: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@
|
||||
|
||||
%.bin: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@
|
||||
Reference in New Issue
Block a user