Prvni ulozeni z chegewara githubu

libraries/BLE/examples/BLE_EddystoneURL_Beacon/BLE_EddystoneURL_Beacon.ino

@@ -0,0 +1,192 @@
+/*
+   EddystoneURL beacon by BeeGee
+   EddystoneURL frame specification https://github.com/google/eddystone/blob/master/eddystone-url/README.md
+
+*/
+
+/*
+   Create a BLE server that will send periodic Eddystone URL frames.
+   The design of creating the BLE server is:
+   1. Create a BLE Server
+   2. Create advertising data
+   3. Start advertising.
+   4. wait
+   5. Stop advertising.
+   6. deep sleep
+
+*/
+#include "sys/time.h"
+
+#include <Arduino.h>
+
+#include "BLEDevice.h"
+#include "BLEUtils.h"
+#include "BLEBeacon.h"
+#include "BLEAdvertising.h"
+#include "BLEEddystoneURL.h"
+
+#include "esp_sleep.h"
+
+#define GPIO_DEEP_SLEEP_DURATION 10     // sleep x seconds and then wake up
+RTC_DATA_ATTR static time_t last;    // remember last boot in RTC Memory
+RTC_DATA_ATTR static uint32_t bootcount; // remember number of boots in RTC Memory
+
+// See the following for generating UUIDs:
+// https://www.uuidgenerator.net/
+BLEAdvertising *pAdvertising;
+struct timeval now;
+
+#define BEACON_UUID "8ec76ea3-6668-48da-9866-75be8bc86f4d" // UUID 1 128-Bit (may use linux tool uuidgen or random numbers via https://www.uuidgenerator.net/)
+
+static const char *eddystone_url_prefix_subs[] = {
+  "http://www.",
+  "https://www.",
+  "http://",
+  "https://",
+  "urn:uuid:",
+  NULL
+};
+
+static const char *eddystone_url_suffix_subs[] = {
+  ".com/",
+  ".org/",
+  ".edu/",
+  ".net/",
+  ".info/",
+  ".biz/",
+  ".gov/",
+  ".com",
+  ".org",
+  ".edu",
+  ".net",
+  ".info",
+  ".biz",
+  ".gov",
+  NULL
+};
+
+static int string_begin_with(const char *str, const char *prefix)
+{
+  int prefix_len = strlen(prefix);
+  if (strncmp(prefix, str, prefix_len) == 0)
+  {
+    return prefix_len;
+  }
+  return 0;
+}
+
+void setBeacon()
+{
+  BLEAdvertisementData oAdvertisementData = BLEAdvertisementData();
+  BLEAdvertisementData oScanResponseData = BLEAdvertisementData();
+
+  const char url[] = "https://d.giesecke.tk";
+
+  int scheme_len, ext_len = 1, i, idx, url_idx;
+  char *ret_data;
+  int url_len = strlen(url);
+
+  ret_data = (char *)calloc(1, url_len + 13);
+
+  ret_data[0] = 2;   // Len
+  ret_data[1] = 0x01;  // Type Flags
+  ret_data[2] = 0x06;  // GENERAL_DISC_MODE 0x02 | BR_EDR_NOT_SUPPORTED 0x04
+  ret_data[3] = 3;   // Len
+  ret_data[4] = 0x03;  // Type 16-Bit UUID
+  ret_data[5] = 0xAA;  // Eddystone UUID 2 -> 0xFEAA LSB
+  ret_data[6] = 0xFE;  // Eddystone UUID 1 MSB
+  ret_data[7] = 19; // Length of Beacon Data
+  ret_data[8] = 0x16;  // Type Service Data
+  ret_data[9] = 0xAA;  // Eddystone UUID 2 -> 0xFEAA LSB
+  ret_data[10] = 0xFE; // Eddystone UUID 1 MSB
+  ret_data[11] = 0x10; // Eddystone Frame Type
+  ret_data[12] = 0xF4; // Beacons TX power at 0m
+
+  i = 0, idx = 13, url_idx = 0;
+
+  //replace prefix
+  scheme_len = 0;
+  while (eddystone_url_prefix_subs[i] != NULL)
+  {
+    if ((scheme_len = string_begin_with(url, eddystone_url_prefix_subs[i])) > 0)
+    {
+      ret_data[idx] = i;
+      idx++;
+      url_idx += scheme_len;
+      break;
+    }
+    i++;
+  }
+  while (url_idx < url_len)
+  {
+    i = 0;
+    ret_data[idx] = url[url_idx];
+    ext_len = 1;
+    while (eddystone_url_suffix_subs[i] != NULL)
+    {
+      if ((ext_len = string_begin_with(&url[url_idx], eddystone_url_suffix_subs[i])) > 0)
+      {
+        ret_data[idx] = i;
+        break;
+      }
+      else
+      {
+        ext_len = 1; //inc 1
+      }
+      i++;
+    }
+    url_idx += ext_len;
+    idx++;
+  }
+  ret_data[7] = idx - 8;
+
+  Serial.printf("struct size %d url size %d reported len %d\n",
+                url_len + 13,
+                url_len, ret_data[7]);
+
+  Serial.printf("URL in data %s\n", &ret_data[13]);
+
+  std::string eddyStoneData(ret_data);
+
+  oAdvertisementData.addData(eddyStoneData);
+  oScanResponseData.setName("URLBeacon");
+  pAdvertising->setAdvertisementData(oAdvertisementData);
+  pAdvertising->setScanResponseData(oScanResponseData);
+}
+
+void setup()
+{
+
+  Serial.begin(115200);
+  gettimeofday(&now, NULL);
+
+  Serial.printf("start ESP32 %d\n", bootcount++);
+
+  Serial.printf("deep sleep (%lds since last reset, %lds since last boot)\n", now.tv_sec, now.tv_sec - last);
+
+  last = now.tv_sec;
+
+  // Create the BLE Device
+  BLEDevice::init("URLBeacon");
+
+  BLEDevice::setPower(ESP_PWR_LVL_N12);
+
+  // Create the BLE Server
+  // BLEServer *pServer = BLEDevice::createServer(); // <-- no longer required to instantiate BLEServer, less flash and ram usage
+
+  pAdvertising = BLEDevice::getAdvertising();
+
+  setBeacon();
+  // Start advertising
+  pAdvertising->start();
+  Serial.println("Advertizing started...");
+  delay(10000);
+  pAdvertising->stop();
+  Serial.printf("enter deep sleep\n");
+  esp_deep_sleep(1000000LL * GPIO_DEEP_SLEEP_DURATION);
+  Serial.printf("in deep sleep\n");
+}
+
+void loop()
+{
+}

libraries/BLE/examples/BLE_EddystoneURL_Beacon/BLE_EddystoneURL_Beacon.md

@@ -0,0 +1,14 @@
+## Eddystone URL beacon
+EddystoneURL beacon by BeeGee based on
+[pcbreflux ESP32 Eddystone URL deepsleep](https://github.com/pcbreflux/espressif/tree/master/esp32/arduino/sketchbook/ESP32_Eddystone_URL_deepsleep)
+
+[EddystoneURL frame specification](https://github.com/google/eddystone/blob/master/eddystone-url/README.md)
+
+   Create a BLE server that will send periodic Eddystone URL frames.
+   The design of creating the BLE server is:
+   1. Create a BLE Server
+   2. Create advertising data
+   3. Start advertising.
+   4. wait
+   5. Stop advertising.
+   6. deep sleep