xPablo.cz/arduino-esp32-custom-lwip-ppp-enabled
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
01eb80dfe2
arduino-esp32-custom-lwip-p.../cores/esp32/esp32-hal-i2c-slave.c

842 lines
26 KiB
C
Raw Blame History

// Copyright 2015-2021 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <inttypes.h>
#include <string.h>
#include <math.h>
#include "sdkconfig.h"
#include "esp_attr.h"
#include "rom/gpio.h"
#include "soc/gpio_sig_map.h"
#include "hal/gpio_types.h"
#include "driver/gpio.h"
#include "esp_err.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#include "freertos/ringbuf.h"
#include "esp_intr_alloc.h"
#include "driver/periph_ctrl.h"
#include "soc/i2c_reg.h"
#include "soc/i2c_struct.h"
#include "hal/i2c_ll.h"
#include "esp32-hal-log.h"
#include "esp32-hal-i2c-slave.h"
#define I2C_SLAVE_USE_RX_QUEUE 0 // 1: Queue, 0: RingBuffer
#if SOC_I2C_NUM > 1
#define I2C_SCL_IDX(p) ((p==0)?I2CEXT0_SCL_OUT_IDX:((p==1)?I2CEXT1_SCL_OUT_IDX:0))
#define I2C_SDA_IDX(p) ((p==0)?I2CEXT0_SDA_OUT_IDX:((p==1)?I2CEXT1_SDA_OUT_IDX:0))
#else
#define I2C_SCL_IDX(p) I2CEXT0_SCL_OUT_IDX
#define I2C_SDA_IDX(p) I2CEXT0_SDA_OUT_IDX
#endif
#if CONFIG_IDF_TARGET_ESP32
#define I2C_TXFIFO_WM_INT_ENA I2C_TXFIFO_EMPTY_INT_ENA
#define I2C_RXFIFO_WM_INT_ENA I2C_RXFIFO_FULL_INT_ENA
#endif
enum {
I2C_SLAVE_EVT_RX, I2C_SLAVE_EVT_TX
};
typedef struct i2c_slave_struct_t {
i2c_dev_t * dev;
uint8_t num;
int8_t sda;
int8_t scl;
i2c_slave_request_cb_t request_callback;
i2c_slave_receive_cb_t receive_callback;
void * arg;
intr_handle_t intr_handle;
TaskHandle_t task_handle;
xQueueHandle event_queue;
#if I2C_SLAVE_USE_RX_QUEUE
xQueueHandle rx_queue;
#else
RingbufHandle_t rx_ring_buf;
#endif
xQueueHandle tx_queue;
uint32_t rx_data_count;
#if !CONFIG_DISABLE_HAL_LOCKS
xSemaphoreHandle lock;
#endif
} i2c_slave_struct_t;
typedef union {
struct {
uint32_t event : 2;
uint32_t stop : 1;
uint32_t param : 29;
};
uint32_t val;
} i2c_slave_queue_event_t;
static i2c_slave_struct_t _i2c_bus_array[SOC_I2C_NUM] = {
{ &I2C0, 0, -1, -1, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 0
#if !CONFIG_DISABLE_HAL_LOCKS
, NULL
#endif
},
#if SOC_I2C_NUM > 1
{ &I2C1, 1, -1, -1, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 0
#if !CONFIG_DISABLE_HAL_LOCKS
, NULL
#endif
}
#endif
};
#if CONFIG_DISABLE_HAL_LOCKS
#define I2C_SLAVE_MUTEX_LOCK()
#define I2C_SLAVE_MUTEX_UNLOCK()
#else
#define I2C_SLAVE_MUTEX_LOCK() if(i2c->lock){xSemaphoreTake(i2c->lock, portMAX_DELAY);}
#define I2C_SLAVE_MUTEX_UNLOCK() if(i2c->lock){xSemaphoreGive(i2c->lock);}
#endif
//-------------------------------------- HAL_LL (Missing Functions) ------------------------------------------------
typedef enum {
I2C_STRETCH_CAUSE_MASTER_READ,
I2C_STRETCH_CAUSE_TX_FIFO_EMPTY,
I2C_STRETCH_CAUSE_RX_FIFO_FULL,
I2C_STRETCH_CAUSE_MAX
} i2c_stretch_cause_t;
static inline i2c_stretch_cause_t i2c_ll_stretch_cause(i2c_dev_t *hw)
{
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3
return hw->sr.stretch_cause;
#elif CONFIG_IDF_TARGET_ESP32S2
return hw->status_reg.stretch_cause;
#else
return I2C_STRETCH_CAUSE_MAX;
#endif
}
static inline void i2c_ll_set_stretch(i2c_dev_t *hw, uint16_t time)
{
#ifndef CONFIG_IDF_TARGET_ESP32
typeof(hw->scl_stretch_conf) scl_stretch_conf;
scl_stretch_conf.val = 0;
scl_stretch_conf.slave_scl_stretch_en = (time > 0);
scl_stretch_conf.stretch_protect_num = time;
scl_stretch_conf.slave_scl_stretch_clr = 1;
hw->scl_stretch_conf.val = scl_stretch_conf.val;
if(time > 0){
//enable interrupt
hw->int_ena.val |= I2C_SLAVE_STRETCH_INT_ENA;
} else {
//disable interrupt
hw->int_ena.val &= (~I2C_SLAVE_STRETCH_INT_ENA);
}
#endif
}
static inline void i2c_ll_stretch_clr(i2c_dev_t *hw)
{
#ifndef CONFIG_IDF_TARGET_ESP32
hw->scl_stretch_conf.slave_scl_stretch_clr = 1;
#endif
}
static inline bool i2c_ll_slave_addressed(i2c_dev_t *hw)
{
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3
return hw->sr.slave_addressed;
#else
return hw->status_reg.slave_addressed;
#endif
}
static inline bool i2c_ll_slave_rw(i2c_dev_t *hw)//not exposed by hal_ll
{
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3
return hw->sr.slave_rw;
#else
return hw->status_reg.slave_rw;
#endif
}
//-------------------------------------- PRIVATE (Function Prototypes) ------------------------------------------------
static void i2c_slave_free_resources(i2c_slave_struct_t * i2c);
static void i2c_slave_delay_us(uint64_t us);
static void i2c_slave_gpio_mode(int8_t pin, gpio_mode_t mode);
static bool i2c_slave_check_line_state(int8_t sda, int8_t scl);
static bool i2c_slave_attach_gpio(i2c_slave_struct_t * i2c, int8_t sda, int8_t scl);
static bool i2c_slave_detach_gpio(i2c_slave_struct_t * i2c);
static bool i2c_slave_set_frequency(i2c_slave_struct_t * i2c, uint32_t clk_speed);
static bool i2c_slave_send_event(i2c_slave_struct_t * i2c, i2c_slave_queue_event_t* event);
static bool i2c_slave_handle_tx_fifo_empty(i2c_slave_struct_t * i2c);
static bool i2c_slave_handle_rx_fifo_full(i2c_slave_struct_t * i2c, uint32_t len);
static size_t i2c_slave_read_rx(i2c_slave_struct_t * i2c, uint8_t * data, size_t len);
static void i2c_slave_isr_handler(void* arg);
static void i2c_slave_task(void *pv_args);
//=====================================================================================================================
//-------------------------------------- Public Functions -------------------------------------------------------------
//=====================================================================================================================
esp_err_t i2cSlaveAttachCallbacks(uint8_t num, i2c_slave_request_cb_t request_callback, i2c_slave_receive_cb_t receive_callback, void * arg){
if(num >= SOC_I2C_NUM){
log_e("Invalid port num: %u", num);
return ESP_ERR_INVALID_ARG;
}
i2c_slave_struct_t * i2c = &_i2c_bus_array[num];
I2C_SLAVE_MUTEX_LOCK();
i2c->request_callback = request_callback;
i2c->receive_callback = receive_callback;
i2c->arg = arg;
I2C_SLAVE_MUTEX_UNLOCK();
return ESP_OK;
}
esp_err_t i2cSlaveInit(uint8_t num, int sda, int scl, uint16_t slaveID, uint32_t frequency, size_t rx_len, size_t tx_len) {
if(num >= SOC_I2C_NUM){
log_e("Invalid port num: %u", num);
return ESP_ERR_INVALID_ARG;
}
if (sda < 0 || scl < 0) {
log_e("invalid pins sda=%d, scl=%d", sda, scl);
return ESP_ERR_INVALID_ARG;
}
if(!frequency){
frequency = 100000;
} else if(frequency > 1000000){
frequency = 1000000;
}
log_i("Initialising I2C Slave: sda=%d scl=%d freq=%d, addr=0x%x", sda, scl, frequency, slaveID);
i2c_slave_struct_t * i2c = &_i2c_bus_array[num];
esp_err_t ret = ESP_OK;
#if !CONFIG_DISABLE_HAL_LOCKS
if(!i2c->lock){
i2c->lock = xSemaphoreCreateMutex();
if (i2c->lock == NULL) {
log_e("RX queue create failed");
return ESP_ERR_NO_MEM;
}
}
#endif
I2C_SLAVE_MUTEX_LOCK();
i2c_slave_free_resources(i2c);
#if I2C_SLAVE_USE_RX_QUEUE
i2c->rx_queue = xQueueCreate(rx_len, sizeof(uint8_t));
if (i2c->rx_queue == NULL) {
log_e("RX queue create failed");
ret = ESP_ERR_NO_MEM;
goto fail;
}
#else
i2c->rx_ring_buf = xRingbufferCreate(rx_len, RINGBUF_TYPE_BYTEBUF);
if (i2c->rx_ring_buf == NULL) {
log_e("RX RingBuf create failed");
ret = ESP_ERR_NO_MEM;
goto fail;
}
#endif
i2c->tx_queue = xQueueCreate(tx_len, sizeof(uint8_t));
if (i2c->tx_queue == NULL) {
log_e("TX queue create failed");
ret = ESP_ERR_NO_MEM;
goto fail;
}
i2c->event_queue = xQueueCreate(16, sizeof(i2c_slave_queue_event_t));
if (i2c->event_queue == NULL) {
log_e("Event queue create failed");
ret = ESP_ERR_NO_MEM;
goto fail;
}
xTaskCreate(i2c_slave_task, "i2c_slave_task", 4096, i2c, 20, &i2c->task_handle);
if(i2c->task_handle == NULL){
log_e("Event thread create failed");
ret = ESP_ERR_NO_MEM;
goto fail;
}
if (frequency == 0) {
frequency = 100000L;
}
frequency = (frequency * 5) / 4;
if (i2c->num == 0) {
periph_module_enable(PERIPH_I2C0_MODULE);
#if SOC_I2C_NUM > 1
} else {
periph_module_enable(PERIPH_I2C1_MODULE);
#endif
}
i2c_ll_slave_init(i2c->dev);
i2c_ll_set_fifo_mode(i2c->dev, true);
i2c_ll_set_slave_addr(i2c->dev, slaveID, false);
i2c_ll_set_tout(i2c->dev, I2C_LL_MAX_TIMEOUT);
i2c_slave_set_frequency(i2c, frequency);
if (!i2c_slave_check_line_state(sda, scl)) {
log_e("bad pin state");
ret = ESP_FAIL;
goto fail;
}
i2c_slave_attach_gpio(i2c, sda, scl);
if (i2c_ll_is_bus_busy(i2c->dev)) {
log_w("Bus busy, reinit");
ret = ESP_FAIL;
goto fail;
}
i2c_ll_disable_intr_mask(i2c->dev, I2C_LL_INTR_MASK);
i2c_ll_clr_intsts_mask(i2c->dev, I2C_LL_INTR_MASK);
i2c_ll_set_fifo_mode(i2c->dev, true);
if (!i2c->intr_handle) {
uint32_t flags = ESP_INTR_FLAG_LOWMED | ESP_INTR_FLAG_SHARED;
if(i2c->num == 0) {
ret = esp_intr_alloc(ETS_I2C_EXT0_INTR_SOURCE, flags, &i2c_slave_isr_handler, i2c, &i2c->intr_handle);
#if SOC_I2C_NUM > 1
} else {
ret = esp_intr_alloc(ETS_I2C_EXT1_INTR_SOURCE, flags, &i2c_slave_isr_handler, i2c, &i2c->intr_handle);
#endif
}
if (ret != ESP_OK) {
log_e("install interrupt handler Failed=%d", ret);
goto fail;
}
}
i2c_ll_txfifo_rst(i2c->dev);
i2c_ll_rxfifo_rst(i2c->dev);
i2c_ll_slave_enable_rx_it(i2c->dev);
i2c_ll_set_stretch(i2c->dev, 0x3FF);
i2c_ll_update(i2c->dev);
I2C_SLAVE_MUTEX_UNLOCK();
return ret;
fail:
i2c_slave_free_resources(i2c);
I2C_SLAVE_MUTEX_UNLOCK();
return ret;
}
esp_err_t i2cSlaveDeinit(uint8_t num){
if(num >= SOC_I2C_NUM){
log_e("Invalid port num: %u", num);
return ESP_ERR_INVALID_ARG;
}
i2c_slave_struct_t * i2c = &_i2c_bus_array[num];
#if !CONFIG_DISABLE_HAL_LOCKS
if(!i2c->lock){
log_e("Lock is not initialized! Did you call i2c_slave_init()?");
return ESP_ERR_NO_MEM;
}
#endif
I2C_SLAVE_MUTEX_LOCK();
i2c_slave_free_resources(i2c);
I2C_SLAVE_MUTEX_UNLOCK();
return ESP_OK;
}
size_t i2cSlaveWrite(uint8_t num, const uint8_t *buf, uint32_t len, uint32_t timeout_ms) {
if(num >= SOC_I2C_NUM){
log_e("Invalid port num: %u", num);
return 0;
}
size_t to_queue = 0, to_fifo = 0;
i2c_slave_struct_t * i2c = &_i2c_bus_array[num];
#if !CONFIG_DISABLE_HAL_LOCKS
if(!i2c->lock){
log_e("Lock is not initialized! Did you call i2c_slave_init()?");
return ESP_ERR_NO_MEM;
}
#endif
if(!i2c->tx_queue){
return 0;
}
I2C_SLAVE_MUTEX_LOCK();
#if CONFIG_IDF_TARGET_ESP32
i2c_ll_slave_disable_tx_it(i2c->dev);
if (i2c_ll_get_txfifo_len(i2c->dev) < SOC_I2C_FIFO_LEN) {
i2c_ll_txfifo_rst(i2c->dev);
}
#endif
to_fifo = i2c_ll_get_txfifo_len(i2c->dev);
if(len < to_fifo){
to_fifo = len;
}
i2c_ll_write_txfifo(i2c->dev, (uint8_t*)buf, to_fifo);
buf += to_fifo;
len -= to_fifo;
//reset tx_queue
xQueueReset(i2c->tx_queue);
//write the rest of the bytes to the queue
if(len){
to_queue = uxQueueSpacesAvailable(i2c->tx_queue);
if(len < to_queue){
to_queue = len;
}
for (size_t i = 0; i < to_queue; i++) {
if (xQueueSend(i2c->tx_queue, &buf[i], timeout_ms / portTICK_RATE_MS) != pdTRUE) {
xQueueReset(i2c->tx_queue);
to_queue = 0;
break;
}
}
//no need to enable TX_EMPTY if tx_queue is empty
if(to_queue){
i2c_ll_slave_enable_tx_it(i2c->dev);
}
}
I2C_SLAVE_MUTEX_UNLOCK();
return to_queue + to_fifo;
}
//=====================================================================================================================
//-------------------------------------- Private Functions ------------------------------------------------------------
//=====================================================================================================================
static void i2c_slave_free_resources(i2c_slave_struct_t * i2c){
i2c_slave_detach_gpio(i2c);
i2c_ll_set_slave_addr(i2c->dev, 0, false);
i2c_ll_disable_intr_mask(i2c->dev, I2C_LL_INTR_MASK);
i2c_ll_clr_intsts_mask(i2c->dev, I2C_LL_INTR_MASK);
if (i2c->intr_handle) {
esp_intr_free(i2c->intr_handle);
i2c->intr_handle = NULL;
}
if(i2c->task_handle){
vTaskDelete(i2c->task_handle);
i2c->task_handle = NULL;
}
#if I2C_SLAVE_USE_RX_QUEUE
if (i2c->rx_queue) {
vQueueDelete(i2c->rx_queue);
i2c->rx_queue = NULL;
}
#else
if (i2c->rx_ring_buf) {
vRingbufferDelete(i2c->rx_ring_buf);
i2c->rx_ring_buf = NULL;
}
#endif
if (i2c->tx_queue) {
vQueueDelete(i2c->tx_queue);
i2c->tx_queue = NULL;
}
if (i2c->event_queue) {
vQueueDelete(i2c->event_queue);
i2c->event_queue = NULL;
}
i2c->rx_data_count = 0;
}
static bool i2c_slave_set_frequency(i2c_slave_struct_t * i2c, uint32_t clk_speed)
{
if (i2c == NULL) {
log_e("no control buffer");
return false;
}
if(clk_speed > 1100000UL){
clk_speed = 1100000UL;
}
// Adjust Fifo thresholds based on frequency
uint32_t a = (clk_speed / 50000L) + 2;
log_d("Fifo thresholds: rx_fifo_full = %d, tx_fifo_empty = %d", SOC_I2C_FIFO_LEN - a, a);
i2c_clk_cal_t clk_cal;
#if SOC_I2C_SUPPORT_APB
i2c_ll_cal_bus_clk(APB_CLK_FREQ, clk_speed, &clk_cal);
i2c_ll_set_source_clk(i2c->dev, I2C_SCLK_APB); /*!< I2C source clock from APB, 80M*/
#elif SOC_I2C_SUPPORT_XTAL
i2c_ll_cal_bus_clk(XTAL_CLK_FREQ, clk_speed, &clk_cal);
i2c_ll_set_source_clk(i2c->dev, I2C_SCLK_XTAL); /*!< I2C source clock from XTAL, 40M */
#endif
i2c_ll_set_txfifo_empty_thr(i2c->dev, a);
i2c_ll_set_rxfifo_full_thr(i2c->dev, SOC_I2C_FIFO_LEN - a);
i2c_ll_set_bus_timing(i2c->dev, &clk_cal);
i2c_ll_set_filter(i2c->dev, 3);
return true;
}
static void i2c_slave_delay_us(uint64_t us)
{
uint64_t m = esp_timer_get_time();
if (us) {
uint64_t e = (m + us);
if (m > e) { //overflow
while ((uint64_t)esp_timer_get_time() > e);
}
while ((uint64_t)esp_timer_get_time() < e);
}
}
static void i2c_slave_gpio_mode(int8_t pin, gpio_mode_t mode)
{
gpio_config_t conf = {
.pin_bit_mask = 1LL << pin,
.mode = mode,
.pull_up_en = GPIO_PULLUP_ENABLE,
.pull_down_en = GPIO_PULLDOWN_DISABLE,
.intr_type = GPIO_INTR_DISABLE
};
gpio_config(&conf);
}
static bool i2c_slave_check_line_state(int8_t sda, int8_t scl)
{
if (sda < 0 || scl < 0) {
return false;//return false since there is nothing to do
}
// if the bus is not 'clear' try the cycling SCL until SDA goes High or 9 cycles
gpio_set_level(sda, 1);
gpio_set_level(scl, 1);
i2c_slave_gpio_mode(sda, GPIO_MODE_INPUT | GPIO_MODE_DEF_OD);
i2c_slave_gpio_mode(scl, GPIO_MODE_INPUT | GPIO_MODE_DEF_OD);
gpio_set_level(scl, 1);
if (!gpio_get_level(sda) || !gpio_get_level(scl)) { // bus in busy state
log_w("invalid state sda(%d)=%d, scl(%d)=%d", sda, gpio_get_level(sda), scl, gpio_get_level(scl));
for (uint8_t a=0; a<9; a++) {
i2c_slave_delay_us(5);
if (gpio_get_level(sda) && gpio_get_level(scl)) { // bus recovered
log_w("Recovered after %d Cycles",a);
gpio_set_level(sda,0); // start
i2c_slave_delay_us(5);
for (uint8_t a=0;a<9; a++) {
gpio_set_level(scl,1);
i2c_slave_delay_us(5);
gpio_set_level(scl,0);
i2c_slave_delay_us(5);
}
gpio_set_level(scl,1);
i2c_slave_delay_us(5);
gpio_set_level(sda,1); // stop
break;
}
gpio_set_level(scl, 0);
i2c_slave_delay_us(5);
gpio_set_level(scl, 1);
}
}
if (!gpio_get_level(sda) || !gpio_get_level(scl)) { // bus in busy state
log_e("Bus Invalid State, Can't init sda=%d, scl=%d",gpio_get_level(sda),gpio_get_level(scl));
return false; // bus is busy
}
return true;
}
static bool i2c_slave_attach_gpio(i2c_slave_struct_t * i2c, int8_t sda, int8_t scl)
{
if (i2c == NULL) {
log_e("no control block");
return false;
}
if ((sda < 0)||( scl < 0)) {
log_e("bad pins sda=%d, scl=%d",sda,scl);
return false;
}
i2c->scl = scl;
gpio_set_level(scl, 1);
i2c_slave_gpio_mode(scl, GPIO_MODE_INPUT_OUTPUT_OD);
gpio_matrix_out(scl, I2C_SCL_IDX(i2c->num), false, false);
gpio_matrix_in(scl, I2C_SCL_IDX(i2c->num), false);
i2c->sda = sda;
gpio_set_level(sda, 1);
i2c_slave_gpio_mode(sda, GPIO_MODE_INPUT_OUTPUT_OD);
gpio_matrix_out(sda, I2C_SDA_IDX(i2c->num), false, false);
gpio_matrix_in(sda, I2C_SDA_IDX(i2c->num), false);
return true;
}
static bool i2c_slave_detach_gpio(i2c_slave_struct_t * i2c)
{
if (i2c == NULL) {
log_e("no control Block");
return false;
}
if (i2c->scl >= 0) {
gpio_matrix_out(i2c->scl, 0x100, false, false);
gpio_matrix_in(0x30, I2C_SCL_IDX(i2c->num), false);
i2c_slave_gpio_mode(i2c->scl, GPIO_MODE_INPUT);
i2c->scl = -1; // un attached
}
if (i2c->sda >= 0) {
gpio_matrix_out(i2c->sda, 0x100, false, false);
gpio_matrix_in(0x30, I2C_SDA_IDX(i2c->num), false);
i2c_slave_gpio_mode(i2c->sda, GPIO_MODE_INPUT);
i2c->sda = -1; // un attached
}
return true;
}
static bool i2c_slave_send_event(i2c_slave_struct_t * i2c, i2c_slave_queue_event_t* event)
{
bool pxHigherPriorityTaskWoken = false;
if(i2c->event_queue) {
if(xQueueSendFromISR(i2c->event_queue, event, (BaseType_t * const)&pxHigherPriorityTaskWoken) != pdTRUE){
//log_e("event_queue_full");
}
}
return pxHigherPriorityTaskWoken;
}
static bool i2c_slave_handle_tx_fifo_empty(i2c_slave_struct_t * i2c)
{
bool pxHigherPriorityTaskWoken = false;
uint32_t d = 0, moveCnt = i2c_ll_get_txfifo_len(i2c->dev);
while (moveCnt > 0) { // read tx queue until Fifo is full or queue is empty
if(xQueueReceiveFromISR(i2c->tx_queue, &d, (BaseType_t * const)&pxHigherPriorityTaskWoken) == pdTRUE){
i2c_ll_write_txfifo(i2c->dev, (uint8_t*)&d, 1);
moveCnt--;
} else {
i2c_ll_slave_disable_tx_it(i2c->dev);
break;
}
}
return pxHigherPriorityTaskWoken;
}
static bool i2c_slave_handle_rx_fifo_full(i2c_slave_struct_t * i2c, uint32_t len)
{
#if I2C_SLAVE_USE_RX_QUEUE
uint32_t d = 0;
#else
uint8_t data[SOC_I2C_FIFO_LEN];
#endif
bool pxHigherPriorityTaskWoken = false;
#if I2C_SLAVE_USE_RX_QUEUE
while (len > 0) {
i2c_ll_read_rxfifo(i2c->dev, (uint8_t*)&d, 1);
if(xQueueSendFromISR(i2c->rx_queue, &d, (BaseType_t * const)&pxHigherPriorityTaskWoken) != pdTRUE){
log_e("rx_queue_full");
} else {
i2c->rx_data_count++;
}
if (--len == 0) {
len = i2c_ll_get_rxfifo_cnt(i2c->dev);
}
#else
if(len){
i2c_ll_read_rxfifo(i2c->dev, data, len);
if(xRingbufferSendFromISR(i2c->rx_ring_buf, (void*) data, len, (BaseType_t * const)&pxHigherPriorityTaskWoken) != pdTRUE){
log_e("rx_ring_buf_full");
} else {
i2c->rx_data_count += len;
}
#endif
}
return pxHigherPriorityTaskWoken;
}
static void i2c_slave_isr_handler(void* arg)
{
bool pxHigherPriorityTaskWoken = false;
i2c_slave_struct_t * i2c = (i2c_slave_struct_t *) arg; // recover data
uint32_t activeInt = i2c_ll_get_intsts_mask(i2c->dev);
i2c_ll_clr_intsts_mask(i2c->dev, activeInt);
uint8_t rx_fifo_len = i2c_ll_get_rxfifo_cnt(i2c->dev);
bool slave_rw = i2c_ll_slave_rw(i2c->dev);
if(activeInt & I2C_RXFIFO_WM_INT_ENA){ // RX FiFo Full
pxHigherPriorityTaskWoken |= i2c_slave_handle_rx_fifo_full(i2c, rx_fifo_len);
i2c_ll_slave_enable_rx_it(i2c->dev);//is this necessary?
}
if(activeInt & I2C_TRANS_COMPLETE_INT_ENA){ // STOP
if(rx_fifo_len){ //READ RX FIFO
pxHigherPriorityTaskWoken |= i2c_slave_handle_rx_fifo_full(i2c, rx_fifo_len);
}
if(i2c->rx_data_count){ //WRITE or RepeatedStart
//SEND RX Event
i2c_slave_queue_event_t event;
event.event = I2C_SLAVE_EVT_RX;
event.stop = !slave_rw;
event.param = i2c->rx_data_count;
pxHigherPriorityTaskWoken |= i2c_slave_send_event(i2c, &event);
//Zero RX count
i2c->rx_data_count = 0;
}
if(slave_rw){ // READ
#if CONFIG_IDF_TARGET_ESP32
if(i2c->dev->status_reg.scl_main_state_last == 6){
//SEND TX Event
i2c_slave_queue_event_t event;
event.event = I2C_SLAVE_EVT_TX;
pxHigherPriorityTaskWoken |= i2c_slave_send_event(i2c, &event);
}
#else
//reset TX data
i2c_ll_txfifo_rst(i2c->dev);
uint8_t d;
while (xQueueReceiveFromISR(i2c->tx_queue, &d, (BaseType_t * const)&pxHigherPriorityTaskWoken) == pdTRUE) ;//flush partial write
#endif
}
}
#ifndef CONFIG_IDF_TARGET_ESP32
if(activeInt & I2C_SLAVE_STRETCH_INT_ENA){ // STRETCH
i2c_stretch_cause_t cause = i2c_ll_stretch_cause(i2c->dev);
if(cause == I2C_STRETCH_CAUSE_MASTER_READ){
//on C3 RX data dissapears with repeated start, so we need to get it here
if(rx_fifo_len){
pxHigherPriorityTaskWoken |= i2c_slave_handle_rx_fifo_full(i2c, rx_fifo_len);
}
//SEND TX Event
i2c_slave_queue_event_t event;
event.event = I2C_SLAVE_EVT_TX;
pxHigherPriorityTaskWoken |= i2c_slave_send_event(i2c, &event);
//will clear after execution
} else if(cause == I2C_STRETCH_CAUSE_TX_FIFO_EMPTY){
pxHigherPriorityTaskWoken |= i2c_slave_handle_tx_fifo_empty(i2c);
i2c_ll_stretch_clr(i2c->dev);
} else if(cause == I2C_STRETCH_CAUSE_RX_FIFO_FULL){
pxHigherPriorityTaskWoken |= i2c_slave_handle_rx_fifo_full(i2c, rx_fifo_len);
i2c_ll_stretch_clr(i2c->dev);
}
}
#endif
if(activeInt & I2C_TXFIFO_WM_INT_ENA){ // TX FiFo Empty
pxHigherPriorityTaskWoken |= i2c_slave_handle_tx_fifo_empty(i2c);
}
if(pxHigherPriorityTaskWoken){
portYIELD_FROM_ISR();
}
}
static size_t i2c_slave_read_rx(i2c_slave_struct_t * i2c, uint8_t * data, size_t len){
if(!len){
return 0;
}
#if I2C_SLAVE_USE_RX_QUEUE
uint8_t d = 0;
BaseType_t res = pdTRUE;
for(size_t i=0; i<len; i++) {
if(data){
res = xQueueReceive(i2c->rx_queue, &data[i], 0);
} else {
res = xQueueReceive(i2c->rx_queue, &d, 0);
}
if (res != pdTRUE) {
log_e("Read Queue(%u) Failed", i);
len = i;
break;
}
}
return (data)?len:0;
#else
size_t dlen = 0,
to_read = len,
so_far = 0,
available = 0;
uint8_t * rx_data = NULL;
vRingbufferGetInfo(i2c->rx_ring_buf, NULL, NULL, NULL, NULL, &available);
if(available < to_read){
log_e("Less available than requested. %u < %u", available, len);
to_read = available;
}
while(to_read){
dlen = 0;
rx_data = (uint8_t *)xRingbufferReceiveUpTo(i2c->rx_ring_buf, &dlen, 0, to_read);
if(!rx_data){
log_e("Receive %u Failed", to_read);
return so_far;
}
if(data){
memcpy(data+so_far, rx_data, dlen);
}
vRingbufferReturnItem(i2c->rx_ring_buf, rx_data);
so_far+=dlen;
to_read-=dlen;
}
return (data)?so_far:0;
#endif
}
static void i2c_slave_task(void *pv_args)
{
i2c_slave_struct_t * i2c = (i2c_slave_struct_t *)pv_args;
i2c_slave_queue_event_t event;
size_t len = 0;
bool stop = false;
uint8_t * data = NULL;
for(;;){
if(xQueueReceive(i2c->event_queue, &event, portMAX_DELAY) == pdTRUE){
// Write
if(event.event == I2C_SLAVE_EVT_RX){
len = event.param;
stop = event.stop;
data = (len > 0)?(uint8_t*)malloc(len):NULL;
if(len && data == NULL){
log_e("Malloc (%u) Failed", len);
}
len = i2c_slave_read_rx(i2c, data, len);
if(i2c->receive_callback){
i2c->receive_callback(i2c->num, data, len, stop, i2c->arg);
}
free(data);
// Read
} else if(event.event == I2C_SLAVE_EVT_TX){
if(i2c->request_callback){
i2c->request_callback(i2c->num, i2c->arg);
}
i2c_ll_stretch_clr(i2c->dev);
}
}
}
vTaskDelete(NULL);
}
Reference in New Issue View Git Blame Copy Permalink