xPablo.cz/arduino-esp32-custom-lwip-ppp-enabled
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
01eb80dfe2
arduino-esp32-custom-lwip-p.../libraries/WiFi/examples/WiFiScanDualAntenna
History
pablo2048 01eb80dfe2 Prvni ulozeni z chegewara githubu
2023-02-25 16:13:53 +01:00
..
README.md Prvni ulozeni z chegewara githubu 2023-02-25 16:13:53 +01:00
WiFiScanDualAntenna.ino Prvni ulozeni z chegewara githubu 2023-02-25 16:13:53 +01:00

README.md

WiFiScan Example

This example demonstrates how to use the WiFi library to scan available WiFi networks and print the results.

This example shows the basic functionality of the dual antenna capability.

Supported Targets

This example is compatible with the ESP32-WROOM-DA.

How to Use Example

Using Arduino IDE

  • Before Compile/Verify, select the correct board: Tools -> Board.
  • Select the COM port: Tools -> Port: xxx where the xxx is the detected COM port.

Using Platform IO

  • Select the COM port: Devices or set the upload_port option on the platformio.ini file.

Example/Log Output

ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1412
load:0x40078000,len:13400
load:0x40080400,len:3672
entry 0x400805f8
Setup done
scan start
scan done
17 networks found
1: IoTNetwork (-62)*
2: WiFiSSID (-62)*
3: B3A7992 (-63)*
4: WiFi (-63) 
5: IoTNetwork2 (-64)*
...

Troubleshooting

Important: Be sure you're using a good quality USB cable and you have enough power source for your project.

  • Programming Fail: If the programming/flash procedure fails, try to reduce the serial connection speed.
  • COM port not detected: Check the USB cable connection and the USB to Serial driver installation.

If the error persists, you can ask for help at the official ESP32 forum or see Contribute.

Contribute

To know how to contribute to this project, see How to contribute.

If you have any feedback or issue to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!

Before creating a new issue, be sure to try the Troubleshooting and to check if the same issue was already created by someone else.

Resources