A much requested feature (mostly because of littlefs's notable lack of
timestamps), this commits adds support for user-specified custom
attributes.
Planned (though underestimated) since v1, custom attributes provide a
route for OSs and applications to provide their own metadata in
littlefs, without limiting portability.
However, unlike custom attributes that can be found on much more
powerful PC filesystems, these custom attributes are very limited,
intended for only a handful of bytes for very important metadata. Each
attribute has only a single byte to identify the attribute, and the
size of all attributes attached to a file is limited to 64 bytes.
Custom attributes can be accessed through the lfs_getattr, lfs_setattr,
and lfs_removeattr functions.
One of the big benefits of inline files is that small files no longer need to
take up a full block. This opens up an opportunity to provide much better
support for storage devices with only a handful of very large blocks. Such as
the internal flash found on most microcontrollers.
After investigating some use cases for a filesystem on internal flash,
it has become apparent that the 255-byte limit is going to be too
restrictive to be useful in many cases. Most uses I found needed files
~4-64 bytes in size, but it wasn't uncommon to find files ~512 bytes in
length.
To try to remedy this, I've pushed the 255 byte limit up to 1023 bytes,
by stealing some bits from the previously-unused attributes's size.
Unfortunately this limits attributes to 63 bytes in total and has a
minor code cost, but I'm not sure even 1023 bytes will be sufficient for
a lot of cases.
The littlefs will probably never be as efficient with internal flash as
other filesystems such as SPIFFS, it just wasn't designed for this sort of
limited geometry. However, this feature has been heavily requested, even
with limitations, because of the opportunity for code reuse on
microcontrollers with both internal and external flash.
Being a portable, microcontroller-scale embedded filesystem, littlefs is
presented with a relatively unique challenge. The amount of RAM
available is on completely different scales from machine to machine, and
what is normally a reasonable RAM assumption may break completely on an
embedded system.
A great example of this is file names. On almost every PC these days, the limit
for a file name is 255 bytes. It's a very convenient limit for a number
of reasons. However, on microcontrollers, allocating 255 bytes of RAM to
do a file search can be unreasonable.
The simplest solution (and one that has existing in littlefs for a
while), is to let this limit be redefined to a smaller value on devices
that need to save RAM. However, this presents an interesting portability
issue. If these devices are plugged into a PC with relatively infinite
RAM, nothing stops the PC from writing files with full 255-byte file
names, which can't be read on the small device.
One solution here is to store this limit on the superblock during format
time. When mounting a disk, the filesystem implementation is responsible for
checking this limit in the superblock. If it's larger than what can be
read, raise an error. If it's smaller, respect the limit on the
superblock and raise an error if the user attempts to exceed it.
In this commit, this strategy is adopted for file names, inline files,
and the size of all attributes, since these could impact the memory
consumption of the filesystem. (Recording the attribute's limit is
iffy, but is the only other arbitrary limit and could be used for disabling
support of custom attributes).
Note! This changes makes it very important to configure littlefs
correctly at format time. If littlefs is formatted on a PC without
changing the limits appropriately, it will be rejected by a smaller
device.
Making the superblock look like "just another entry" allows us to treat
the superblock like "just another entry" and reuse a decent amount of
logic that would otherwise only be used a format and mount time. In this
case we can use append to write out the superblock like it was creating
a new entry on the filesystem.
Proof-of-concept implementation of inline files that stores the file's
content directly in its parent's directory pair.
Inline files are indicated by a different type stored in an entry's
struct field, and take advantage of resizable entries. Where a normal
file's entry would normally hold the reference to the CTZ skip-list, an
inline file's entry contains the contents of the actual file.
Unfortunately, storing the inline file on disk is the easy part. We also
need to manage inline files in the internals of littlefs and provide the
same operations that we do on normal files, all while reusing as much
code as possible to avoid a significant increase in code cost.
There is a relatively simple, though maybe a bit hacky, solution here. If a
file fits entirely in a cache line, the file logic never actually has to go to
disk. This means we can just give the file a "pretend" block (hopefully
one that would assert if ever written to), and carry out file operations
as normal, as long as we catch the file before it exceeds the cache line
and write out the file to an actual disk.
The size field is redundant, since an entry's size can be determined
from the nlen+elen+alen+4. However, as you may have guessed from that
expression, calculating the size this way is a bit roundabout and
inefficient. Despite its redundancy, it's cheaper to store the size in the
entry, though with a minor RAM cost.
Note, extra care must now be taken to make sure these size and len fields
don't fall out of sync.
The separation of data-structure vs entry type has been implicit for a
while now, and even taken advantage of to simplify the traverse logic.
Explicitely separating the data-struct and entry types allows us to
introduce new data structures (inlined files).
As pointed out by davidefer, the lookahead pointer modular arithmetic
does not work around integer overflow when the pointer size is not a
multiple of the block count.
To avoid overflow problems, the easy solution is to stop trying to
work around integer overflows and keep the lookahead offset inside the
block device. To make this work, the ack was modified into a resetable
counter that is decremented every block allocation.
As a plus, quite a bit of the allocation logic ended up simplified.
Note: It's still expected to modify lfs_utils.h when porting littlefs
to a new target/system. There's just too much room for system-specific
improvements, such as taking advantage of CRC hardware.
Rather, encouraging modification of lfs_util.h and making it easy to
modify and debug should result in better integration with the consuming
systems.
This just adds a bunch of quality-of-life improvements that should help
development and integration in littlefs.
- Macros that require no side-effects are all-caps
- System includes are only brought in when needed
- Malloc/free wrappers
- LFS_NO_* checks for quickly disabling things at the command line
- At least a little-bit more docs
Rather than tracking all in-flight blocks blocks during a lookahead,
littlefs uses an ack scheme to mark the first allocated block that
hasn't reached the disk yet. littlefs assumes all blocks since the
last ack are bad or in-flight, and uses this to know when it's out
of storage.
However, these unacked allocations were still being populated in the
lookahead buffer. If the whole block device fits in the lookahead
buffer, _and_ littlefs managed to scan around the whole storage while
an unacked block was still in-flight, it would assume the block was
free and misallocate it.
The fix is to only fill the lookahead buffer up to the last ack.
The internal free structure was restructured to simplify the runtime
calculation of lookahead size.
- Write on read-only file to return LFS_ERR_BADF
- Renaming directory onto file to return LFS_ERR_NOTEMPTY
- Changed LFS_ERR_INVAL in lfs_file_seek to assert
An annoying part of filesystems is that the software library can change
independently of the on-disk structures. For this reason versioning is
very important, and must be handled separately for the software and
on-disk parts.
In this patch, littlefs provides two version numbers at compile time,
with major and minor parts, in the form of 6 macros.
LFS_VERSION // Library version, uint32_t encoded
LFS_VERSION_MAJOR // Major - Backwards incompatible changes
LFS_VERSION_MINOR // Minor - Feature additions
LFS_DISK_VERSION // On-disk version, uint32_t encoded
LFS_DISK_VERSION_MAJOR // Major - Backwards incompatible changes
LFS_DISK_VERSION_MINOR // Minor - Feature additions
Note that littlefs will error if it finds a major version number that
is different, or a minor version number that has regressed.
As a copy-on-write filesystem, the truncate function is a very nice
function to have, as it can take advantage of reusing the data already
written out to disk.
littlefs had an unwritten assumption that the block device's program
size would be a multiple of the read size, and the block size would
be a multiple of the program size. This has already caused confusion
for users. Added a note and assert to catch unexpected geometries
early.
Also found that the prog/erase functions indicated they must return
LFS_ERR_CORRUPT to catch bad blocks. This is no longer true as errors
are found by CRC.
As it was, if a user operated on a directory while at the same
time iterating over the directory, the directory objects could
fall out of sync. In the best case, files may be skipped while
removing everything in a file, in the worst case, a very poorly
timed directory relocate could be missed.
Simple fix is to add the same directory tracking that is currently
in use for files, at a small code+complexity cost.
Short story, files are no longer committed to directories during
file sync/close if the last write did not complete successfully.
This avoids a set of interesting user-experience issues related
to the end-of-life behaviour of the filesystem.
As a filesystem approaches end-of-life, the chances of running into
LFS_ERR_NOSPC grows rather quickly. Since this condition occurs after
at the end of a devices life, it's likely that operating in these
conditions hasn't been tested thoroughly.
In the specific case of file-writes, you can hit an LFS_ERR_NOSPC after
parts of the file have been written out. If the program simply continues
and closes the file, the file is written out half completed. Since
littlefs has a strong garuntee the prevents half-writes, it's unlikely
this state of the file would be expected.
To make things worse, since close is also responsible for memory
cleanup, it's actually _impossible_ to continue working as it was
without leaking memory.
By prevent the file commits, end-of-life behaviour should at least retain
a previous copy of the filesystem without any surprises.
The littlefs allows buffers to be passed statically in the case
that a system does not have a heap. Unfortunately, this means we
can't round up in the case of an unaligned lookahead buffer.
Double unfortunately, rounding down after clamping to the block device
size could result in a lookahead of zero for block devices < 32 blocks
large.
The assert in littlefs does catch this case, but rounding down prevents
support for < 32 block devices.
The solution is to simply require a 32-bit aligned buffer with an
assert. This avoids runtime problems while allowing a user to pass
in the correct buffer for < 32 block devices. Rounding up can be
handled at higher API levels.
Deduplication and deorphan steps aren't required under indentical
conditions, but they can be processed in the same iteration of the
filesystem. Since lfs_alloc (requires deorphan) occurs on most write
calls to the filesystem (requires deduplication), it was simpler to
just compine the steps into a single lfs_deorphan step.
Also traded out the places where lfs_rename/lfs_remove just defer
operations to the deorphan step. This adds a bit of code, but also
significantly speeds up directory operations.
The "move problem" has been present in littlefs for a while, but I haven't
come across a solution worth implementing for various reasons.
The problem is simple: how do we move directory entries across
directories atomically? Since multiple directory entries are involved,
we can't rely entirely on the atomic block updates. It ends up being
a bit of a puzzle.
To make the problem more complicated, any directory block update can
fail due to wear, and cause the directory block to need to be relocated.
This happens rarely, but brings a large number of corner cases.
---
The solution in this patch is simple:
1. Mark source as "moving"
2. Copy source to destination
3. Remove source
If littlefs ever runs into a "moving" entry, that means a power loss
occured during a move. Either the destination entry exists or it
doesn't. In this case we just search the entire filesystem for the
destination entry.
This is expensive, however the chance of a power loss during a move
is relatively low.
Simply limiting the lookahead region to the size of
the block device fixes the problem.
Also added logic to limit the allocated region and
floor to nearest word, since the additional memory
couldn't really be used effectively.
Zero attributes are actually supported at the moment, but this change
will allow entry attribute to be added in a backwards compatible manner.
Each dir entry is now prefixed with a 32 bit tag:
4b - entry type
4b - data structure
8b - entry len
8b - attribute len
8b - name len
A full entry on disk looks a bit like this:
[- 8 -|- 8 -|- 8 -|- 8 -|-- elen --|-- alen --|-- nlen --]
[ type | elen | alen | nlen | entry | attrs | name ]
The actually contents of the attributes section is a bit handwavey
until the first attributes are implemented, but to put plans in place:
Each attribute will be prefixed with only a byte that indicates the type
of attribute. Attributes should be sorted based on portability, since
unknown attributes will force attribute parsing to stop.
This provides a path for adding inlined files in the future, which
requires multiple lengths to distinguish between the file data and name.
As an extra bonus, the directory can now be iterated over even if the
types are unknown, since the name's representation is consistent on all
entry types.
This does come at the cost of reducing types from 16-bits to 8-bits, but
I doubt this will become a problem.
Before, the littlefs relied on the underlying block device
to report corruption that occurs when writing data to disk.
This requirement is easy to miss or implement incorrectly, since
the error detection is only required when a block becomes corrupted,
which is very unlikely to happen until late in the block device's
lifetime.
The littlefs can detect corruption itself by reading back written data.
This requires a bit of care to reuse the available buffers, and may rely
on checksums to avoid additional RAM requirements.
This does have a runtime penalty with the extra read operations, but
should make the littlefs much more robust to different implementations.
More documentation may still by worthwhile (design documentation?),
but for now this provides a reasonable baseline.
- readme
- license
- header documentation
This provides a limited form of wear leveling. While wear is
not actually balanced across blocks, the filesystem can recover
from corrupted blocks and extend the lifetime of a device nearly
as much as dynamic wear leveling.
For use-cases where wear is important, it would be better to use
a full form of dynamic wear-leveling at the block level. (or
consider a logging filesystem).
Corrupted block handling was simply added on top of the existing
logic in place for the filesystem, so it's a bit more noodly than
it may have to be, but it gets the work done.
This adds a fully independent layer between the rest of the filesystem
and the block device. This requires some additionally logic around cache
invalidation and flushing, but removes the need for any higher layer to
consider read/write sizes less than what is supported by the hardware.
Additionally, these caches can be used for possible speed improvements.
This is left up to the user to optimize for their use cases. For very
limited embedded systems with byte-level read/writes, the caches could
be omitted completely, or they could even be the size of a full block
for minimizing storage access.
(A full block may not be the best for speed, consider if only a small
portion of the read block is used, but I'll leave that evaluation as an
exercise for any consumers of this library)
Adopted buffer followed by size. The other order was original
chosen due to some other functions with a more complicated
parameter list.
This convention is important, as the bd api is one of the main
apis facing porting efforts.
Originally had two seperate positions for reading/writing,
but this is inconsistent with the the posix standard, which
has a single position for reading and writing.
Also added proper handling of when the file is dirty, just
added an internal flag for this state.
Also moved the entry out of the file struct, and rearranged
some members to clean things up.
A rather involved upgrade for both files and directories, seek and
related functions are now completely supported:
- lfs_file_seek
- lfs_file_tell
- lfs_file_rewind
- lfs_file_size
- lfs_dir_seek
- lfs_dir_tell
- lfs_dir_rewind
This change also highlighted the concern that lfs_off_t is unsigned,
whereas off_t is traditionally signed. Unfortunately, lfs_off_t is
already used intensively through the codebase, so in focusing on
moving forward and avoiding getting bogged down by details, I'm going to
keep it as is and use the signed type lfs_soff_t where necessary.
Now all of the open flags are correctly handled
Even annoying cases where we can't trust the blocks that are already
on file, such as appending existing files and writing to the middle
of files.
Files are now stored directly in the index-list, instead of being
referenced by pointers that used to live there. This somewhat reduces
the complexity around handling files, while still keeping the O(logn)
lookup cost.
Removed scanning for stride
- Adds complexity with questionable benefit
- Can be added as an optimization later
Fixed handling around device boundaries and where lookahead may not be a
factor of the device size (consider small devices with only a few
blocks)
Added support for configuration with optional dynamic memory as found in
the caching configuration
This adds caching of the most recent read/program blocks, allowing
support of devices that don't have byte-level read+writes, along
with reduced device access on devices that do support byte-level
read+writes.
Note: The current implementation is a bit eager to drop caches where
it simplifies the cache layer. This layer is already complex enough.
Note: It may be worthwhile to add a compile switch for caching to
reduce code size, note sure.
Note: This does add a dependency on malloc, which could have a porting
layer, but I'm just using the functions from stdlib for now. These can be
overwritten with noops if the user controls the system, and keeps things
simple for now.
Before, the lfs had multiple paths to determine config options:
- lfs_config struct passed during initialization
- lfs_bd_info struct passed during block device initialization
- compile time options
This allowed different developers to provide their own needs
to the filesystem, such as the block device capabilities and
the higher level user's own tweaks.
However, this comes with additional complexity and action required
when the configurations are incompatible.
For now, this has been reduced to all information (including block
device function pointers) being passed through the lfs_config struct.
We just defer more complicated handling of configuration options to
the top level user.
This simplifies configuration handling and gives the top level user
the responsibility to handle configuration, which they probably would
have wanted to do anyways.
After quite a bit of prototyping, settled on the following functions:
- lfs_dir_alloc - create a new dir
- lfs_dir_fetch - load and check a dir pair from disk
- lfs_dir_commit - save a dir pair to disk
- lfs_dir_shift - shrink a dir pair to disk
- lfs_dir_append - add a dir entry, creating dirs if needed
- lfs_dir_remove - remove a dir entry, dropping dirs if needed
Additionally, followed through with a few other tweaks
Removing the dependency to the parent pointer solves
many issues with non-atomic updates of children's
parent pointers with respect to any move operations.
However, this comes with an embarrassingly terrible
runtime as the only other option is to exhaustively
check every dir entry to find a child's parent.
Fortunately, deorphaning should be a relatively rare
operation.
