Exploring inlined mutable configuration

Currently littlefs uses a separate mutable state struct and immutable
config struct. This lets users place the config struct in ROM where
possible.

However the recent addition of LFS_STATICCFG raises the question of if
this split is still valuable.

If the config is copied into the mutable struct at runtime, this allows
a couple things:
1. Easier user interface, config can be stack allocated, no need to store
   the config struct for the lifetime of littlefs in OSs.
2. Avoids duplication when littlefs would need to change config based on
   observed superblocks, such as LFS_NAME_MAX limits
3. In theory, access to a single struct is faster/smaller as it avoids
   an additional load instruction.

Unfortunately, inlining the dynamic config runs into several issues:

1. The code size actually increases with this change! From digging into
   this it's for a couple reasons:

   - Copying the config over takes code.

   - C has notorious problems with pointer aliasing, accessing
     constants from a const struct actually allows C to assume the
     values aren't going to change in more situations.

     This suggests it may be possible to reduce the code size more by
     loading the config pointer into a variable, but I haven't explored
     this probably not-worth-it optimization.

   - Even assuming deduplication of superblock-dependent configuration,
     the config struct is significantly larger than the mutable struct,
     and it turns out combining these two exceeds the limits of
     immediate-relative-loads, discarding the possible code size
     improvement from avoiding a second dereference.

2. The implementation of dynamic configuration differs significantly from
   the static configuration. This adds mess into the compile-time #ifdefs
   needed to support both options.

.github/workflows/post-release.yml

@@ -1,26 +0,0 @@
-name: post-release
-on:
-  release:
-    branches: [master]
-    types: [released]
-
-jobs:
-  post-release:
-    runs-on: ubuntu-18.04
-    steps:
-      # trigger post-release in dependency repo, this indirection allows the
-      # dependency repo to be updated often without affecting this repo. At
-      # the time of this comment, the dependency repo is responsible for
-      # creating PRs for other dependent repos post-release.
-      - name: trigger-post-release
-        continue-on-error: true
-        run: |
-          curl -sS -X POST -H "authorization: token ${{secrets.BOT_TOKEN}}" \
-            "$GITHUB_API_URL/repos/${{secrets.POST_RELEASE_REPO}}/dispatches" \
-            -d "$(jq -n '{
-              event_type: "post-release",
-              client_payload: {
-                repo: env.GITHUB_REPOSITORY,
-                version: "${{github.event.release.tag_name}}"}}' \
-              | tee /dev/stderr)"
-

.github/workflows/release.yml

@@ -1,215 +0,0 @@
-name: release
-on:
-  workflow_run:
-    workflows: [test]
-    branches: [master]
-    types: [completed]
-
-jobs:
-  release:
-    runs-on: ubuntu-18.04
-
-    # need to manually check for a couple things
-    # - tests passed?
-    # - we are the most recent commit on master?
-    if: ${{github.event.workflow_run.conclusion == 'success' &&
-      github.event.workflow_run.head_sha == github.sha}}
-
-    steps:
-      - uses: actions/checkout@v2
-        with:
-          ref: ${{github.event.workflow_run.head_sha}}
-          # need workflow access since we push branches
-          # containing workflows
-          token: ${{secrets.BOT_TOKEN}}
-          # need all tags
-          fetch-depth: 0
-
-      # try to get results from tests
-      - uses: dawidd6/action-download-artifact@v2
-        continue-on-error: true
-        with:
-          workflow: ${{github.event.workflow_run.name}}
-          run_id: ${{github.event.workflow_run.id}}
-          name: results
-          path: results
-
-      - name: find-version
-        run: |
-          # rip version from lfs.h
-          LFS_VERSION="$(grep -o '^#define LFS_VERSION .*$' lfs.h \
-            | awk '{print $3}')"
-          LFS_VERSION_MAJOR="$((0xffff & ($LFS_VERSION >> 16)))"
-          LFS_VERSION_MINOR="$((0xffff & ($LFS_VERSION >>  0)))"
-
-          # find a new patch version based on what we find in our tags
-          LFS_VERSION_PATCH="$( \
-            ( git describe --tags --abbrev=0 \
-                --match="v$LFS_VERSION_MAJOR.$LFS_VERSION_MINOR.*" \
-              || echo 'v0.0.-1' ) \
-            | awk -F '.' '{print $3+1}')"
-
-          # found new version
-          LFS_VERSION="v$LFS_VERSION_MAJOR`
-            `.$LFS_VERSION_MINOR`
-            `.$LFS_VERSION_PATCH"
-          echo "LFS_VERSION=$LFS_VERSION"
-          echo "LFS_VERSION=$LFS_VERSION" >> $GITHUB_ENV
-          echo "LFS_VERSION_MAJOR=$LFS_VERSION_MAJOR" >> $GITHUB_ENV
-          echo "LFS_VERSION_MINOR=$LFS_VERSION_MINOR" >> $GITHUB_ENV
-          echo "LFS_VERSION_PATCH=$LFS_VERSION_PATCH" >> $GITHUB_ENV
-
-      # try to find previous version?
-      - name: find-prev-version
-        continue-on-error: true
-        run: |
-          LFS_PREV_VERSION="$(git describe --tags --abbrev=0 --match 'v*')"
-          echo "LFS_PREV_VERSION=$LFS_PREV_VERSION"
-          echo "LFS_PREV_VERSION=$LFS_PREV_VERSION" >> $GITHUB_ENV
-
-      # try to find results from tests
-      - name: collect-results
-        run: |
-          # previous results to compare against?
-          [ -n "$LFS_PREV_VERSION" ] && curl -sS \
-            "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/`
-              `status/$LFS_PREV_VERSION" \
-            | jq -re 'select(.sha != env.GITHUB_SHA) | .statuses[]' \
-            >> prev-results.json \
-            || true
-
-          # unfortunately these each have their own format
-          [ -e results/code-thumb.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / code").description
-                  | capture("Code size is (?<result>[0-9]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/code.py -u results/code-thumb.csv -s | awk '
-              NR==2 {printf "Code size,%d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-          [ -e results/code-thumb-readonly.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / code (readonly)").description
-                  | capture("Code size is (?<result>[0-9]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/code.py -u results/code-thumb-readonly.csv -s | awk '
-              NR==2 {printf "Code size<br/>(readonly),%d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-          [ -e results/code-thumb-threadsafe.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / code (threadsafe)").description
-                  | capture("Code size is (?<result>[0-9]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/code.py -u results/code-thumb-threadsafe.csv -s | awk '
-              NR==2 {printf "Code size<br/>(threadsafe),%d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-          [ -e results/code-thumb-migrate.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / code (migrate)").description
-                  | capture("Code size is (?<result>[0-9]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/code.py -u results/code-thumb-migrate.csv -s | awk '
-              NR==2 {printf "Code size<br/>(migrate),%d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-          [ -e results/code-thumb-error-asserts.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / code (error-asserts)").description
-                  | capture("Code size is (?<result>[0-9]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/code.py -u results/code-thumb-error-asserts.csv -s | awk '
-              NR==2 {printf "Code size<br/>(error-asserts),%d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-          [ -e results/coverage.csv ] && ( \
-            export PREV="$(jq -re '
-                  select(.context == "results / coverage").description
-                  | capture("Coverage is (?<result>[0-9\\.]+)").result' \
-                prev-results.json || echo 0)"
-            ./scripts/coverage.py -u results/coverage.csv -s | awk -F '[ /%]+' '
-              NR==2 {printf "Coverage,%.1f%% of %d lines",$4,$3}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",$4-ENVIRON["PREV"]}
-              NR==2 {printf "\n"}' \
-            >> results.csv)
-
-          # transpose to GitHub table
-          [ -e results.csv ] || exit 0
-          awk -F ',' '
-            {label[NR]=$1; value[NR]=$2}
-            END {
-              for (r=1; r<=NR; r++) {printf "| %s ",label[r]}; printf "|\n";
-              for (r=1; r<=NR; r++) {printf "|:--"}; printf "|\n";
-              for (r=1; r<=NR; r++) {printf "| %s ",value[r]}; printf "|\n"}' \
-            results.csv > results.txt
-          echo "RESULTS:"
-          cat results.txt
-
-      # find changes from history
-      - name: collect-changes
-        run: |
-          [ -n "$LFS_PREV_VERSION" ] || exit 0
-          # use explicit link to github commit so that release notes can
-          # be copied elsewhere
-          git log "$LFS_PREV_VERSION.." \
-            --grep='^Merge' --invert-grep \
-            --format="format:[\`%h\`](`
-              `https://github.com/$GITHUB_REPOSITORY/commit/%h) %s" \
-            > changes.txt
-          echo "CHANGES:"
-          cat changes.txt
-
-      # create and update major branches (vN and vN-prefix)
-      - name: create-major-branches
-        run: |
-          # create major branch
-          git branch "v$LFS_VERSION_MAJOR" HEAD
-
-          # create major prefix branch
-          git config user.name ${{secrets.BOT_USER}}
-          git config user.email ${{secrets.BOT_EMAIL}}
-          git fetch "https://github.com/$GITHUB_REPOSITORY.git" \
-            "v$LFS_VERSION_MAJOR-prefix" || true
-          ./scripts/prefix.py "lfs$LFS_VERSION_MAJOR"
-          git branch "v$LFS_VERSION_MAJOR-prefix" $( \
-            git commit-tree $(git write-tree) \
-              $(git rev-parse --verify -q FETCH_HEAD | sed -e 's/^/-p /') \
-              -p HEAD \
-              -m "Generated v$LFS_VERSION_MAJOR prefixes")
-          git reset --hard
-
-          # push!
-          git push --atomic origin \
-            "v$LFS_VERSION_MAJOR" \
-            "v$LFS_VERSION_MAJOR-prefix"
-
-      # build release notes
-      - name: create-release
-        run: |
-          # create release and patch version tag (vN.N.N)
-          # only draft if not a patch release
-          [ -e results.txt ] && export RESULTS="$(cat results.txt)"
-          [ -e changes.txt ] && export CHANGES="$(cat changes.txt)"
-          curl -sS -X POST -H "authorization: token ${{secrets.BOT_TOKEN}}" \
-            "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/releases" \
-            -d "$(jq -n '{
-              tag_name: env.LFS_VERSION,
-              name: env.LFS_VERSION | rtrimstr(".0"),
-              target_commitish: "${{github.event.workflow_run.head_sha}}",
-              draft: env.LFS_VERSION | endswith(".0"),
-              body: [env.RESULTS, env.CHANGES | select(.)] | join("\n\n")}' \
-              | tee /dev/stderr)"
-

.github/workflows/status.yml

@@ -1,55 +0,0 @@
-name: status
-on:
-  workflow_run:
-    workflows: [test]
-    types: [completed]
-
-jobs:
-  status:
-    runs-on: ubuntu-18.04
-    steps:
-      # custom statuses?
-      - uses: dawidd6/action-download-artifact@v2
-        continue-on-error: true
-        with:
-          workflow: ${{github.event.workflow_run.name}}
-          run_id: ${{github.event.workflow_run.id}}
-          name: status
-          path: status
-      - name: update-status
-        continue-on-error: true
-        run: |
-          ls status
-          for s in $(shopt -s nullglob ; echo status/*.json)
-          do
-            # parse requested status
-            export STATE="$(jq -er '.state' $s)"
-            export CONTEXT="$(jq -er '.context' $s)"
-            export DESCRIPTION="$(jq -er '.description' $s)"
-            # help lookup URL for job/steps because GitHub makes
-            # it VERY HARD to link to specific jobs
-            export TARGET_URL="$(
-              jq -er '.target_url // empty' $s || (
-                export TARGET_JOB="$(jq -er '.target_job' $s)"
-                export TARGET_STEP="$(jq -er '.target_step // ""' $s)"
-                curl -sS -H "authorization: token ${{secrets.BOT_TOKEN}}" \
-                  "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/runs/`
-                    `${{github.event.workflow_run.id}}/jobs" \
-                  | jq -er '.jobs[]
-                    | select(.name == env.TARGET_JOB)
-                    | .html_url
-                      + "?check_suite_focus=true"
-                      + ((.steps[]
-                        | select(.name == env.TARGET_STEP)
-                        | "#step:\(.number):0") // "")'))"
-            # update status
-            curl -sS -X POST -H "authorization: token ${{secrets.BOT_TOKEN}}" \
-              "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/statuses/`
-                `${{github.event.workflow_run.head_sha}}" \
-              -d "$(jq -n '{
-                state: env.STATE,
-                context: env.CONTEXT,
-                description: env.DESCRIPTION,
-                target_url: env.TARGET_URL}' \
-                | tee /dev/stderr)"
-          done

.github/workflows/test.yml

@@ -1,446 +0,0 @@
-name: test
-on: [push, pull_request]
-
-env:
-  CFLAGS: -Werror
-  MAKEFLAGS: -j
-
-jobs:
-  # run tests
-  test:
-    runs-on: ubuntu-18.04
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [x86_64, thumb, mips, powerpc]
-
-    steps:
-      - uses: actions/checkout@v2
-      - name: install
-        run: |
-          # need toml, also pip3 isn't installed by default?
-          sudo apt-get update -qq
-          sudo apt-get install -qq python3 python3-pip lcov
-          sudo pip3 install toml
-          gcc --version
-
-          # setup a ram-backed disk to speed up reentrant tests
-          mkdir disks
-          sudo mount -t tmpfs -o size=100m tmpfs disks
-          TESTFLAGS="$TESTFLAGS --disk=disks/disk"
-
-          # collect coverage
-          mkdir -p coverage
-          TESTFLAGS="$TESTFLAGS --coverage=`
-            `coverage/${{github.job}}-${{matrix.arch}}.info"
-
-          echo "TESTFLAGS=$TESTFLAGS" >> $GITHUB_ENV
-
-      # cross-compile with ARM Thumb (32-bit, little-endian)
-      - name: install-thumb
-        if: ${{matrix.arch == 'thumb'}}
-        run: |
-          sudo apt-get install -qq \
-            gcc-arm-linux-gnueabi \
-            libc6-dev-armel-cross \
-            qemu-user
-          echo "CC=arm-linux-gnueabi-gcc -mthumb --static" >> $GITHUB_ENV
-          echo "EXEC=qemu-arm" >> $GITHUB_ENV
-          arm-linux-gnueabi-gcc --version
-          qemu-arm -version
-      # cross-compile with MIPS (32-bit, big-endian)
-      - name: install-mips
-        if: ${{matrix.arch == 'mips'}}
-        run: |
-          sudo apt-get install -qq \
-            gcc-mips-linux-gnu \
-            libc6-dev-mips-cross \
-            qemu-user
-          echo "CC=mips-linux-gnu-gcc --static" >> $GITHUB_ENV
-          echo "EXEC=qemu-mips" >> $GITHUB_ENV
-          mips-linux-gnu-gcc --version
-          qemu-mips -version
-      # cross-compile with PowerPC (32-bit, big-endian)
-      - name: install-powerpc
-        if: ${{matrix.arch == 'powerpc'}}
-        run: |
-          sudo apt-get install -qq \
-            gcc-powerpc-linux-gnu \
-            libc6-dev-powerpc-cross \
-            qemu-user
-          echo "CC=powerpc-linux-gnu-gcc --static" >> $GITHUB_ENV
-          echo "EXEC=qemu-ppc" >> $GITHUB_ENV
-          powerpc-linux-gnu-gcc --version
-          qemu-ppc -version
-
-      # make sure example can at least compile
-      - name: test-example
-        run: |
-          sed -n '/``` c/,/```/{/```/d; p}' README.md > test.c
-          make all CFLAGS+=" \
-            -Duser_provided_block_device_read=NULL \
-            -Duser_provided_block_device_prog=NULL \
-            -Duser_provided_block_device_erase=NULL \
-            -Duser_provided_block_device_sync=NULL \
-            -include stdio.h"
-          rm test.c
-
-      # test configurations
-      # normal+reentrant tests
-      - name: test-default
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk"
-      # NOR flash: read/prog = 1 block = 4KiB
-      - name: test-nor
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_READ_SIZE=1 -DLFS_BLOCK_SIZE=4096"
-      # SD/eMMC: read/prog = 512 block = 512
-      - name: test-emmc
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_READ_SIZE=512 -DLFS_BLOCK_SIZE=512"
-      # NAND flash: read/prog = 4KiB block = 32KiB
-      - name: test-nand
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_READ_SIZE=4096 -DLFS_BLOCK_SIZE=\(32*1024\)"
-      # other extreme geometries that are useful for various corner cases
-      - name: test-no-intrinsics
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_NO_INTRINSICS"
-      - name: test-byte-writes
-        # it just takes too long to test byte-level writes when in qemu,
-        # should be plenty covered by the other configurations
-        if: ${{matrix.arch == 'x86_64'}}
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_READ_SIZE=1 -DLFS_CACHE_SIZE=1"
-      - name: test-block-cycles
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_BLOCK_CYCLES=1"
-      - name: test-odd-block-count
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_BLOCK_COUNT=1023 -DLFS_LOOKAHEAD_SIZE=256"
-      - name: test-odd-block-size
-        run: |
-          make clean
-          make test TESTFLAGS+="-nrk \
-            -DLFS_READ_SIZE=11 -DLFS_BLOCK_SIZE=704"
-
-      # upload coverage for later coverage
-      - name: upload-coverage
-        uses: actions/upload-artifact@v2
-        with:
-          name: coverage
-          path: coverage
-          retention-days: 1
-
-      # update results
-      - name: results-code
-        run: |
-          mkdir -p results
-          make clean
-          make code \
-            CFLAGS+=" \
-              -DLFS_NO_ASSERT \
-              -DLFS_NO_DEBUG \
-              -DLFS_NO_WARN \
-              -DLFS_NO_ERROR" \
-            CODEFLAGS+="-o results/code-${{matrix.arch}}.csv"
-      - name: results-code-readonly
-        run: |
-          mkdir -p results
-          make clean
-          make code \
-            CFLAGS+=" \
-              -DLFS_NO_ASSERT \
-              -DLFS_NO_DEBUG \
-              -DLFS_NO_WARN \
-              -DLFS_NO_ERROR \
-              -DLFS_READONLY" \
-            CODEFLAGS+="-o results/code-${{matrix.arch}}-readonly.csv"
-      - name: results-code-threadsafe
-        run: |
-          mkdir -p results
-          make clean
-          make code \
-            CFLAGS+=" \
-              -DLFS_NO_ASSERT \
-              -DLFS_NO_DEBUG \
-              -DLFS_NO_WARN \
-              -DLFS_NO_ERROR \
-              -DLFS_THREADSAFE" \
-            CODEFLAGS+="-o results/code-${{matrix.arch}}-threadsafe.csv"
-      - name: results-code-migrate
-        run: |
-          mkdir -p results
-          make clean
-          make code \
-            CFLAGS+=" \
-              -DLFS_NO_ASSERT \
-              -DLFS_NO_DEBUG \
-              -DLFS_NO_WARN \
-              -DLFS_NO_ERROR \
-              -DLFS_MIGRATE" \
-            CODEFLAGS+="-o results/code-${{matrix.arch}}-migrate.csv"
-      - name: results-code-error-asserts
-        run: |
-          mkdir -p results
-          make clean
-          make code \
-            CFLAGS+=" \
-              -DLFS_NO_DEBUG \
-              -DLFS_NO_WARN \
-              -DLFS_NO_ERROR \
-              -D'LFS_ASSERT(test)=do {if(!(test)) {return -1;}} while(0)'" \
-            CODEFLAGS+="-o results/code-${{matrix.arch}}-error-asserts.csv"
-      - name: upload-results
-        uses: actions/upload-artifact@v2
-        with:
-          name: results
-          path: results
-      # limit reporting to Thumb, otherwise there would be too many numbers
-      # flying around for the results to be easily readable
-      - name: collect-status
-        if: ${{matrix.arch == 'thumb'}}
-        run: |
-          mkdir -p status
-          for f in $(shopt -s nullglob ; echo results/code*.csv)
-          do
-            export STEP="results-code$(
-              echo $f | sed -n 's/.*code-.*-\(.*\).csv/-\1/p')"
-            export CONTEXT="results / code$(
-              echo $f | sed -n 's/.*code-.*-\(.*\).csv/ (\1)/p')"
-            export PREV="$(curl -sS \
-              "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/status/master" \
-              | jq -re 'select(.sha != env.GITHUB_SHA) | .statuses[]
-                | select(.context == env.CONTEXT).description
-                | capture("Code size is (?<result>[0-9]+)").result' \
-              || echo 0)"
-            export DESCRIPTION="$(./scripts/code.py -u $f -s | awk '
-              NR==2 {printf "Code size is %d B",$2}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",100*($2-ENVIRON["PREV"])/ENVIRON["PREV"]}')"
-            jq -n '{
-              state: "success",
-              context: env.CONTEXT,
-              description: env.DESCRIPTION,
-              target_job: "${{github.job}} (${{matrix.arch}})",
-              target_step: env.STEP}' \
-              | tee status/code$(
-                echo $f | sed -n 's/.*code-.*-\(.*\).csv/-\1/p').json
-          done
-      - name: upload-status
-        if: ${{matrix.arch == 'thumb'}}
-        uses: actions/upload-artifact@v2
-        with:
-          name: status
-          path: status
-          retention-days: 1
-
-  # run under Valgrind to check for memory errors
-  valgrind:
-    runs-on: ubuntu-18.04
-    steps:
-      - uses: actions/checkout@v2
-      - name: install
-        run: |
-          # need toml, also pip3 isn't installed by default?
-          sudo apt-get update -qq
-          sudo apt-get install -qq python3 python3-pip
-          sudo pip3 install toml
-      - name: install-valgrind
-        run: |
-          sudo apt-get update -qq
-          sudo apt-get install -qq valgrind
-          valgrind --version
-      # normal tests, we don't need to test all geometries
-      - name: test-valgrind
-        run: make test TESTFLAGS+="-k --valgrind"
-
-  # self-host with littlefs-fuse for a fuzz-like test
-  fuse:
-    runs-on: ubuntu-18.04
-    if: ${{!endsWith(github.ref, '-prefix')}}
-    steps:
-      - uses: actions/checkout@v2
-      - name: install
-        run: |
-          # need toml, also pip3 isn't installed by default?
-          sudo apt-get update -qq
-          sudo apt-get install -qq python3 python3-pip libfuse-dev
-          sudo pip3 install toml
-          fusermount -V
-          gcc --version
-      - uses: actions/checkout@v2
-        with:
-          repository: littlefs-project/littlefs-fuse
-          ref: v2
-          path: littlefs-fuse
-      - name: setup
-        run: |
-          # copy our new version into littlefs-fuse
-          rm -rf littlefs-fuse/littlefs/*
-          cp -r $(git ls-tree --name-only HEAD) littlefs-fuse/littlefs
-
-          # setup disk for littlefs-fuse
-          mkdir mount
-          sudo chmod a+rw /dev/loop0
-          dd if=/dev/zero bs=512 count=128K of=disk
-          losetup /dev/loop0 disk
-      - name: test
-        run: |
-          # self-host test
-          make -C littlefs-fuse
-
-          littlefs-fuse/lfs --format /dev/loop0
-          littlefs-fuse/lfs /dev/loop0 mount
-
-          ls mount
-          mkdir mount/littlefs
-          cp -r $(git ls-tree --name-only HEAD) mount/littlefs
-          cd mount/littlefs
-          stat .
-          ls -flh
-          make -B test
-
-  # test migration using littlefs-fuse
-  migrate:
-    runs-on: ubuntu-18.04
-    if: ${{!endsWith(github.ref, '-prefix')}}
-    steps:
-      - uses: actions/checkout@v2
-      - name: install
-        run: |
-          # need toml, also pip3 isn't installed by default?
-          sudo apt-get update -qq
-          sudo apt-get install -qq python3 python3-pip libfuse-dev
-          sudo pip3 install toml
-          fusermount -V
-          gcc --version
-      - uses: actions/checkout@v2
-        with:
-          repository: littlefs-project/littlefs-fuse
-          ref: v2
-          path: v2
-      - uses: actions/checkout@v2
-        with:
-          repository: littlefs-project/littlefs-fuse
-          ref: v1
-          path: v1
-      - name: setup
-        run: |
-          # copy our new version into littlefs-fuse
-          rm -rf v2/littlefs/*
-          cp -r $(git ls-tree --name-only HEAD) v2/littlefs
-
-          # setup disk for littlefs-fuse
-          mkdir mount
-          sudo chmod a+rw /dev/loop0
-          dd if=/dev/zero bs=512 count=128K of=disk
-          losetup /dev/loop0 disk
-      - name: test
-        run: |
-          # compile v1 and v2
-          make -C v1
-          make -C v2
-
-          # run self-host test with v1
-          v1/lfs --format /dev/loop0
-          v1/lfs /dev/loop0 mount
-
-          ls mount
-          mkdir mount/littlefs
-          cp -r $(git ls-tree --name-only HEAD) mount/littlefs
-          cd mount/littlefs
-          stat .
-          ls -flh
-          make -B test
-
-          # attempt to migrate
-          cd ../..
-          fusermount -u mount
-
-          v2/lfs --migrate /dev/loop0
-          v2/lfs /dev/loop0 mount
-
-          # run self-host test with v2 right where we left off
-          ls mount
-          cd mount/littlefs
-          stat .
-          ls -flh
-          make -B test
-
-  # collect coverage info
-  coverage:
-    runs-on: ubuntu-18.04
-    needs: [test]
-    steps:
-      - uses: actions/checkout@v2
-      - name: install
-        run: |
-          sudo apt-get update -qq
-          sudo apt-get install -qq python3 python3-pip lcov
-          sudo pip3 install toml
-      # yes we continue-on-error nearly every step, continue-on-error
-      # at job level apparently still marks a job as failed, which isn't
-      # what we want
-      - uses: actions/download-artifact@v2
-        continue-on-error: true
-        with:
-          name: coverage
-          path: coverage
-      - name: results-coverage
-        continue-on-error: true
-        run: |
-          mkdir -p results
-          lcov $(for f in coverage/*.info ; do echo "-a $f" ; done) \
-            -o results/coverage.info
-          ./scripts/coverage.py results/coverage.info -o results/coverage.csv
-      - name: upload-results
-        uses: actions/upload-artifact@v2
-        with:
-          name: results
-          path: results
-      - name: collect-status
-        run: |
-          mkdir -p status
-          [ -e results/coverage.csv ] || exit 0
-          export STEP="results-coverage"
-          export CONTEXT="results / coverage"
-          export PREV="$(curl -sS \
-            "$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/status/master" \
-            | jq -re 'select(.sha != env.GITHUB_SHA) | .statuses[]
-              | select(.context == env.CONTEXT).description
-              | capture("Coverage is (?<result>[0-9\\.]+)").result' \
-            || echo 0)"
-          export DESCRIPTION="$(
-            ./scripts/coverage.py -u results/coverage.csv -s | awk -F '[ /%]+' '
-              NR==2 {printf "Coverage is %.1f%% of %d lines",$4,$3}
-              NR==2 && ENVIRON["PREV"]+0 != 0 {
-                printf " (%+.1f%%)",$4-ENVIRON["PREV"]}')"
-          jq -n '{
-            state: "success",
-            context: env.CONTEXT,
-            description: env.DESCRIPTION,
-            target_job: "${{github.job}}",
-            target_step: env.STEP}' \
-            | tee status/coverage.json
-      - name: upload-status
-        uses: actions/upload-artifact@v2
-        with:
-          name: status
-          path: status
-          retention-days: 1

.travis.yml

@@ -0,0 +1,454 @@
+# environment variables
+env:
+  global:
+    - CFLAGS=-Werror
+    - MAKEFLAGS=-j
+
+# cache installation dirs
+cache:
+  pip: true
+  directories:
+    - $HOME/.cache/apt
+
+# common installation
+_: &install-common
+  # need toml, also pip3 isn't installed by default?
+  - sudo apt-get install python3 python3-pip
+  - sudo pip3 install toml
+  # setup a ram-backed disk to speed up reentrant tests
+  - mkdir disks
+  - sudo mount -t tmpfs -o size=100m tmpfs disks
+  - export TFLAGS="$TFLAGS --disk=disks/disk"
+
+# test cases
+_: &test-example
+  # make sure example can at least compile
+  - sed -n '/``` c/,/```/{/```/d; p}' README.md > test.c &&
+    make all CFLAGS+="
+        -Duser_provided_block_device_read=NULL
+        -Duser_provided_block_device_prog=NULL
+        -Duser_provided_block_device_erase=NULL
+        -Duser_provided_block_device_sync=NULL
+        -include stdio.h"
+# default tests
+_: &test-default
+  # normal+reentrant tests
+  - make test TFLAGS+="-nrk"
+# common real-life geometries
+_: &test-nor
+  # NOR flash: read/prog = 1 block = 4KiB
+  - make test TFLAGS+="-nrk -DLFS_READ_SIZE=1 -DLFS_BLOCK_SIZE=4096"
+_: &test-emmc
+  # eMMC: read/prog = 512 block = 512
+  - make test TFLAGS+="-nrk -DLFS_READ_SIZE=512 -DLFS_BLOCK_SIZE=512"
+_: &test-nand
+  # NAND flash: read/prog = 4KiB block = 32KiB
+  - make test TFLAGS+="-nrk -DLFS_READ_SIZE=4096 -DLFS_BLOCK_SIZE=\(32*1024\)"
+# other extreme geometries that are useful for testing various corner cases
+_: &test-no-intrinsics
+  - make test TFLAGS+="-nrk -DLFS_NO_INTRINSICS"
+_: &test-no-inline
+  - make test TFLAGS+="-nrk -DLFS_INLINE_MAX=0"
+_: &test-byte-writes
+  - make test TFLAGS+="-nrk -DLFS_READ_SIZE=1 -DLFS_CACHE_SIZE=1"
+_: &test-block-cycles
+  - make test TFLAGS+="-nrk -DLFS_BLOCK_CYCLES=1"
+_: &test-odd-block-count
+  - make test TFLAGS+="-nrk -DLFS_BLOCK_COUNT=1023 -DLFS_LOOKAHEAD_SIZE=256"
+_: &test-odd-block-size
+  - make test TFLAGS+="-nrk -DLFS_READ_SIZE=11 -DLFS_BLOCK_SIZE=704"
+
+# report size 
+_: &report-size
+  # compile and find the code size with the smallest configuration
+  - make -j1 clean size
+        OBJ="$(ls lfs*.c | sed 's/\.c/\.o/' | tr '\n' ' ')"
+        CFLAGS+="-DLFS_NO_ASSERT -DLFS_NO_DEBUG -DLFS_NO_WARN -DLFS_NO_ERROR"
+        | tee sizes
+  # update status if we succeeded, compare with master if possible
+  - |
+    if [ "$TRAVIS_TEST_RESULT" -eq 0 ]
+    then
+        CURR=$(tail -n1 sizes | awk '{print $1}')
+        PREV=$(curl -u "$GEKY_BOT_STATUSES" https://api.github.com/repos/$TRAVIS_REPO_SLUG/status/master \
+            | jq -re "select(.sha != \"$TRAVIS_COMMIT\")
+                | .statuses[] | select(.context == \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\").description
+                | capture(\"code size is (?<size>[0-9]+)\").size" \
+            || echo 0)
+  
+        STATUS="Passed, code size is ${CURR}B"
+        if [ "$PREV" -ne 0 ]
+        then
+            STATUS="$STATUS ($(python -c "print '%+.2f' % (100*($CURR-$PREV)/$PREV.0)")%)"
+        fi
+    fi
+
+# stage control
+stages:
+  - name: test
+  - name: deploy
+    if: branch = master AND type = push
+
+# job control
+jobs:
+  # native testing
+  - &x86
+    stage: test
+    env:
+      - NAME=littlefs-x86
+    install: *install-common
+    script: [*test-example, *report-size]
+  - {<<: *x86, script: [*test-default,          *report-size]}
+  - {<<: *x86, script: [*test-nor,              *report-size]}
+  - {<<: *x86, script: [*test-emmc,             *report-size]}
+  - {<<: *x86, script: [*test-nand,             *report-size]}
+  - {<<: *x86, script: [*test-no-intrinsics,    *report-size]}
+  - {<<: *x86, script: [*test-no-inline,        *report-size]}
+  - {<<: *x86, script: [*test-byte-writes,      *report-size]}
+  - {<<: *x86, script: [*test-block-cycles,     *report-size]}
+  - {<<: *x86, script: [*test-odd-block-count,  *report-size]}
+  - {<<: *x86, script: [*test-odd-block-size,   *report-size]}
+
+  # cross-compile with ARM (thumb mode)
+  - &arm
+    stage: test
+    env:
+      - NAME=littlefs-arm
+      - CC="arm-linux-gnueabi-gcc --static -mthumb"
+      - TFLAGS="$TFLAGS --exec=qemu-arm"
+    install:
+      - *install-common
+      - sudo apt-get install
+            gcc-arm-linux-gnueabi
+            libc6-dev-armel-cross
+            qemu-user
+      - arm-linux-gnueabi-gcc --version
+      - qemu-arm -version
+    script: [*test-example, *report-size]
+  - {<<: *arm, script: [*test-default,          *report-size]}
+  - {<<: *arm, script: [*test-nor,              *report-size]}
+  - {<<: *arm, script: [*test-emmc,             *report-size]}
+  - {<<: *arm, script: [*test-nand,             *report-size]}
+  - {<<: *arm, script: [*test-no-intrinsics,    *report-size]}
+  - {<<: *arm, script: [*test-no-inline,        *report-size]}
+  # it just takes way to long to run byte-level writes in qemu,
+  # note this is still tested in the native tests
+  #- {<<: *arm, script: [*test-byte-writes,      *report-size]}
+  - {<<: *arm, script: [*test-block-cycles,     *report-size]}
+  - {<<: *arm, script: [*test-odd-block-count,  *report-size]}
+  - {<<: *arm, script: [*test-odd-block-size,   *report-size]}
+
+  # cross-compile with MIPS
+  - &mips
+    stage: test
+    env:
+      - NAME=littlefs-mips
+      - CC="mips-linux-gnu-gcc --static"
+      - TFLAGS="$TFLAGS --exec=qemu-mips"
+    install:
+      - *install-common
+      - sudo apt-get install
+            gcc-mips-linux-gnu
+            libc6-dev-mips-cross
+            qemu-user
+      - mips-linux-gnu-gcc --version
+      - qemu-mips -version
+    script: [*test-example, *report-size]
+  - {<<: *mips, script: [*test-default,          *report-size]}
+  - {<<: *mips, script: [*test-nor,              *report-size]}
+  - {<<: *mips, script: [*test-emmc,             *report-size]}
+  - {<<: *mips, script: [*test-nand,             *report-size]}
+  - {<<: *mips, script: [*test-no-intrinsics,    *report-size]}
+  - {<<: *mips, script: [*test-no-inline,        *report-size]}
+  # it just takes way to long to run byte-level writes in qemu,
+  # note this is still tested in the native tests
+  #- {<<: *mips, script: [*test-byte-writes,      *report-size]}
+  - {<<: *mips, script: [*test-block-cycles,     *report-size]}
+  - {<<: *mips, script: [*test-odd-block-count,  *report-size]}
+  - {<<: *mips, script: [*test-odd-block-size,   *report-size]}
+
+  # cross-compile with PowerPC
+  - &powerpc
+    stage: test
+    env:
+      - NAME=littlefs-powerpc
+      - CC="powerpc-linux-gnu-gcc --static"
+      - TFLAGS="$TFLAGS --exec=qemu-ppc"
+    install:
+      - *install-common
+      - sudo apt-get install
+            gcc-powerpc-linux-gnu
+            libc6-dev-powerpc-cross
+            qemu-user
+      - powerpc-linux-gnu-gcc --version
+      - qemu-ppc -version
+    script: [*test-example, *report-size]
+  - {<<: *powerpc, script: [*test-default,          *report-size]}
+  - {<<: *powerpc, script: [*test-nor,              *report-size]}
+  - {<<: *powerpc, script: [*test-emmc,             *report-size]}
+  - {<<: *powerpc, script: [*test-nand,             *report-size]}
+  - {<<: *powerpc, script: [*test-no-intrinsics,    *report-size]}
+  - {<<: *powerpc, script: [*test-no-inline,        *report-size]}
+  # it just takes way to long to run byte-level writes in qemu,
+  # note this is still tested in the native tests
+  #- {<<: *powerpc, script: [*test-byte-writes,      *report-size]}
+  - {<<: *powerpc, script: [*test-block-cycles,     *report-size]}
+  - {<<: *powerpc, script: [*test-odd-block-count,  *report-size]}
+  - {<<: *powerpc, script: [*test-odd-block-size,   *report-size]}
+
+  # test under valgrind, checking for memory errors
+  - &valgrind
+    stage: test
+    env:
+      - NAME=littlefs-valgrind
+    install:
+      - *install-common
+      - sudo apt-get install valgrind
+      - valgrind --version
+    script:
+      - make test TFLAGS+="-k --valgrind"
+
+  # test minimal compilation using static configs
+  - stage: test
+    env:
+      - NAME=littlefs-minimal
+      - CC="arm-linux-gnueabi-gcc --static -mthumb"
+      - CFLAGS="-Werror
+            -DLFS_STATICCFG -DLFS_FILE_STATICCFG
+            -DLFS_READ_SIZE=16
+            -DLFS_PROG_SIZE=16
+            -DLFS_BLOCK_SIZE=512
+            -DLFS_BLOCK_COUNT=1024
+            -DLFS_BLOCK_CYCLES=-1
+            -DLFS_CACHE_SIZE=64
+            -DLFS_LOOKAHEAD_SIZE=16
+            -DLFS_NO_ASSERT -DLFS_NO_DEBUG -DLFS_NO_WARN -DLFS_NO_ERROR"
+    if: branch !~ -prefix$
+    install:
+      - *install-common
+      - sudo apt-get install
+            gcc-arm-linux-gnueabi
+            libc6-dev-armel-cross
+      - arm-linux-gnueabi-gcc --version
+    # report-size will compile littlefs and report the size
+    script: [*report-size]
+
+  # self-host with littlefs-fuse for fuzz test
+  - stage: test
+    env:
+      - NAME=littlefs-fuse
+    if: branch !~ -prefix$
+    install:
+      - *install-common
+      - sudo apt-get install libfuse-dev
+      - git clone --depth 1 https://github.com/geky/littlefs-fuse -b v2
+      - fusermount -V
+      - gcc --version
+
+      # setup disk for littlefs-fuse
+      - rm -rf littlefs-fuse/littlefs/*
+      - cp -r $(git ls-tree --name-only HEAD) littlefs-fuse/littlefs
+
+      - mkdir mount
+      - sudo chmod a+rw /dev/loop0
+      - dd if=/dev/zero bs=512 count=128K of=disk
+      - losetup /dev/loop0 disk
+    script:
+      # self-host test
+      - make -C littlefs-fuse
+
+      - littlefs-fuse/lfs --format /dev/loop0
+      - littlefs-fuse/lfs /dev/loop0 mount
+
+      - ls mount
+      - mkdir mount/littlefs
+      - cp -r $(git ls-tree --name-only HEAD) mount/littlefs
+      - cd mount/littlefs
+      - stat .
+      - ls -flh
+      - make -B test
+
+  # test migration using littlefs-fuse
+  - stage: test
+    env:
+      - NAME=littlefs-migration
+    if: branch !~ -prefix$
+    install:
+      - *install-common
+      - sudo apt-get install libfuse-dev
+      - git clone --depth 1 https://github.com/geky/littlefs-fuse -b v2 v2
+      - git clone --depth 1 https://github.com/geky/littlefs-fuse -b v1 v1
+      - fusermount -V
+      - gcc --version
+
+      # setup disk for littlefs-fuse
+      - rm -rf v2/littlefs/*
+      - cp -r $(git ls-tree --name-only HEAD) v2/littlefs
+
+      - mkdir mount
+      - sudo chmod a+rw /dev/loop0
+      - dd if=/dev/zero bs=512 count=128K of=disk
+      - losetup /dev/loop0 disk
+    script:
+      # compile v1 and v2
+      - make -C v1
+      - make -C v2
+
+      # run self-host test with v1
+      - v1/lfs --format /dev/loop0
+      - v1/lfs /dev/loop0 mount
+
+      - ls mount
+      - mkdir mount/littlefs
+      - cp -r $(git ls-tree --name-only HEAD) mount/littlefs
+      - cd mount/littlefs
+      - stat .
+      - ls -flh
+      - make -B test
+
+      # attempt to migrate
+      - cd ../..
+      - fusermount -u mount
+
+      - v2/lfs --migrate /dev/loop0
+      - v2/lfs /dev/loop0 mount
+
+      # run self-host test with v2 right where we left off
+      - ls mount
+      - cd mount/littlefs
+      - stat .
+      - ls -flh
+      - make -B test
+
+  # automatically create releases
+  - stage: deploy
+    env:
+      - NAME=deploy
+    script:
+      - |
+        bash << 'SCRIPT'
+        set -ev
+        # Find version defined in lfs.h
+        LFS_VERSION=$(grep -ox '#define LFS_VERSION .*' lfs.h | cut -d ' ' -f3)
+        LFS_VERSION_MAJOR=$((0xffff & ($LFS_VERSION >> 16)))
+        LFS_VERSION_MINOR=$((0xffff & ($LFS_VERSION >>  0)))
+        # Grab latests patch from repo tags, default to 0, needs finagling
+        # to get past github's pagination api
+        PREV_URL=https://api.github.com/repos/$TRAVIS_REPO_SLUG/git/refs/tags/v$LFS_VERSION_MAJOR.$LFS_VERSION_MINOR.
+        PREV_URL=$(curl -u "$GEKY_BOT_RELEASES" "$PREV_URL" -I \
+            | sed -n '/^Link/{s/.*<\(.*\)>; rel="last"/\1/;p;q0};$q1' \
+            || echo $PREV_URL)
+        LFS_VERSION_PATCH=$(curl -u "$GEKY_BOT_RELEASES" "$PREV_URL" \
+            | jq 'map(.ref | match("\\bv.*\\..*\\.(.*)$";"g")
+                .captures[].string | tonumber) | max + 1' \
+            || echo 0)
+        # We have our new version
+        LFS_VERSION="v$LFS_VERSION_MAJOR.$LFS_VERSION_MINOR.$LFS_VERSION_PATCH"
+        echo "VERSION $LFS_VERSION"
+        # Check that we're the most recent commit
+        CURRENT_COMMIT=$(curl -f -u "$GEKY_BOT_RELEASES" \
+            https://api.github.com/repos/$TRAVIS_REPO_SLUG/commits/master \
+            | jq -re '.sha')
+        [ "$TRAVIS_COMMIT" == "$CURRENT_COMMIT" ] || exit 0
+        # Create major branch
+        git branch v$LFS_VERSION_MAJOR HEAD
+        # Create major prefix branch
+        git config user.name "geky bot"
+        git config user.email "bot@geky.net"
+        git fetch https://github.com/$TRAVIS_REPO_SLUG.git \
+            --depth=50 v$LFS_VERSION_MAJOR-prefix || true
+        ./scripts/prefix.py lfs$LFS_VERSION_MAJOR
+        git branch v$LFS_VERSION_MAJOR-prefix $( \
+            git commit-tree $(git write-tree) \
+                $(git rev-parse --verify -q FETCH_HEAD | sed -e 's/^/-p /') \
+                -p HEAD \
+                -m "Generated v$LFS_VERSION_MAJOR prefixes")
+        git reset --hard
+        # Update major version branches (vN and vN-prefix)
+        git push --atomic https://$GEKY_BOT_RELEASES@github.com/$TRAVIS_REPO_SLUG.git \
+            v$LFS_VERSION_MAJOR \
+            v$LFS_VERSION_MAJOR-prefix
+        # Build release notes
+        PREV=$(git tag --sort=-v:refname -l "v*" | head -1)
+        if [ ! -z "$PREV" ]
+        then
+            echo "PREV $PREV"
+            CHANGES=$(git log --oneline $PREV.. --grep='^Merge' --invert-grep)
+            printf "CHANGES\n%s\n\n" "$CHANGES"
+        fi
+        case ${GEKY_BOT_DRAFT:-minor} in
+            true)  DRAFT=true ;;
+            minor) DRAFT=$(jq -R 'endswith(".0")' <<< "$LFS_VERSION") ;;
+            false) DRAFT=false ;;
+        esac
+        # Create the release and patch version tag (vN.N.N)
+        curl -f -u "$GEKY_BOT_RELEASES" -X POST \
+            https://api.github.com/repos/$TRAVIS_REPO_SLUG/releases \
+            -d "{
+                \"tag_name\": \"$LFS_VERSION\",
+                \"name\": \"${LFS_VERSION%.0}\",
+                \"target_commitish\": \"$TRAVIS_COMMIT\",
+                \"draft\": $DRAFT,
+                \"body\": $(jq -sR '.' <<< "$CHANGES")
+            }" #"
+        SCRIPT
+
+# manage statuses
+before_install:
+  - |
+    # don't clobber other (not us) failures
+    if ! curl https://api.github.com/repos/$TRAVIS_REPO_SLUG/status/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+        | jq -e ".statuses[] | select(
+            .context == \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\" and
+            .state == \"failure\" and
+            (.target_url | endswith(\"$TRAVIS_JOB_NUMBER\") | not))"
+    then
+        curl -u "$GEKY_BOT_STATUSES" -X POST \
+            https://api.github.com/repos/$TRAVIS_REPO_SLUG/statuses/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+            -d "{
+                \"context\": \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\",
+                \"state\": \"pending\",
+                \"description\": \"${STATUS:-In progress}\",
+                \"target_url\": \"$TRAVIS_JOB_WEB_URL#$TRAVIS_JOB_NUMBER\"
+            }"
+    fi
+
+after_failure:
+  - |
+    # don't clobber other (not us) failures
+    if ! curl https://api.github.com/repos/$TRAVIS_REPO_SLUG/status/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+        | jq -e ".statuses[] | select(
+            .context == \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\" and
+            .state == \"failure\" and
+            (.target_url | endswith(\"$TRAVIS_JOB_NUMBER\") | not))"
+    then
+        curl -u "$GEKY_BOT_STATUSES" -X POST \
+            https://api.github.com/repos/$TRAVIS_REPO_SLUG/statuses/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+            -d "{
+                \"context\": \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\",
+                \"state\": \"failure\",
+                \"description\": \"${STATUS:-Failed}\",
+                \"target_url\": \"$TRAVIS_JOB_WEB_URL#$TRAVIS_JOB_NUMBER\"
+            }"
+    fi
+
+after_success:
+  - |
+    # don't clobber other (not us) failures
+    # only update if we were last job to mark in progress,
+    # this isn't perfect but is probably good enough
+    if ! curl https://api.github.com/repos/$TRAVIS_REPO_SLUG/status/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+        | jq -e ".statuses[] | select(
+            .context == \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\" and
+            (.state == \"failure\" or .state == \"pending\") and
+            (.target_url | endswith(\"$TRAVIS_JOB_NUMBER\") | not))"
+    then
+        curl -u "$GEKY_BOT_STATUSES" -X POST \
+            https://api.github.com/repos/$TRAVIS_REPO_SLUG/statuses/${TRAVIS_PULL_REQUEST_SHA:-$TRAVIS_COMMIT} \
+            -d "{
+                \"context\": \"${TRAVIS_BUILD_STAGE_NAME,,}/$NAME\",
+                \"state\": \"success\",
+                \"description\": \"${STATUS:-Passed}\",
+                \"target_url\": \"$TRAVIS_JOB_WEB_URL#$TRAVIS_JOB_NUMBER\"
+            }"
+    fi

Makefile

@@ -1,39 +1,25 @@
-ifdef BUILDDIR
-# make sure BUILDDIR ends with a slash
-override BUILDDIR := $(BUILDDIR)/
-# bit of a hack, but we want to make sure BUILDDIR directory structure
-# is correct before any commands
-$(if $(findstring n,$(MAKEFLAGS)),, $(shell mkdir -p \
-	$(BUILDDIR) \
-	$(BUILDDIR)bd \
-	$(BUILDDIR)tests))
-endif
-
-# overridable target/src/tools/flags/etc
+TARGET = lfs.a
 ifneq ($(wildcard test.c main.c),)
-TARGET ?= $(BUILDDIR)lfs
-else
-TARGET ?= $(BUILDDIR)lfs.a
+override TARGET = lfs
 endif
 
-
 CC ?= gcc
 AR ?= ar
 SIZE ?= size
-CTAGS ?= ctags
-NM ?= nm
-LCOV ?= lcov
 
-SRC ?= $(wildcard *.c)
-OBJ := $(SRC:%.c=$(BUILDDIR)%.o)
-DEP := $(SRC:%.c=$(BUILDDIR)%.d)
-ASM := $(SRC:%.c=$(BUILDDIR)%.s)
+SRC += $(wildcard *.c bd/*.c)
+OBJ := $(SRC:.c=.o)
+DEP := $(SRC:.c=.d)
+ASM := $(SRC:.c=.s)
 
 ifdef DEBUG
 override CFLAGS += -O0 -g3
 else
 override CFLAGS += -Os
 endif
+ifdef WORD
+override CFLAGS += -m$(WORD)
+endif
 ifdef TRACE
 override CFLAGS += -DLFS_YES_TRACE
 endif
@@ -42,73 +28,40 @@ override CFLAGS += -std=c99 -Wall -pedantic
 override CFLAGS += -Wextra -Wshadow -Wjump-misses-init -Wundef
 
 ifdef VERBOSE
-override TESTFLAGS += -v
-override CODEFLAGS += -v
-override COVERAGEFLAGS += -v
-endif
-ifdef EXEC
-override TESTFLAGS += --exec="$(EXEC)"
-endif
-ifdef BUILDDIR
-override TESTFLAGS += --build-dir="$(BUILDDIR:/=)"
-override CODEFLAGS += --build-dir="$(BUILDDIR:/=)"
-endif
-ifneq ($(NM),nm)
-override CODEFLAGS += --nm-tool="$(NM)"
+override TFLAGS += -v
 endif
 
 
-# commands
-.PHONY: all build
-all build: $(TARGET)
+all: $(TARGET)
 
-.PHONY: asm
 asm: $(ASM)
 
-.PHONY: size
 size: $(OBJ)
 	$(SIZE) -t $^
 
-.PHONY: tags
-tags:
-	$(CTAGS) --totals --c-types=+p $(shell find -H -name '*.h') $(SRC)
-
-.PHONY: code
-code: $(OBJ)
-	./scripts/code.py $^ $(CODEFLAGS)
-
-.PHONY: test
 test:
-	./scripts/test.py $(TESTFLAGS)
+	./scripts/test.py $(TFLAGS)
 .SECONDEXPANSION:
 test%: tests/test$$(firstword $$(subst \#, ,%)).toml
-	./scripts/test.py $@ $(TESTFLAGS)
+	./scripts/test.py $@ $(TFLAGS)
 
-.PHONY: coverage
-coverage:
-	./scripts/coverage.py $(BUILDDIR)tests/*.toml.info $(COVERAGEFLAGS)
-
-# rules
 -include $(DEP)
-.SUFFIXES:
 
-$(BUILDDIR)lfs: $(OBJ)
+lfs: $(OBJ)
 	$(CC) $(CFLAGS) $^ $(LFLAGS) -o $@
 
-$(BUILDDIR)%.a: $(OBJ)
+%.a: $(OBJ)
 	$(AR) rcs $@ $^
 
-$(BUILDDIR)%.o: %.c
+%.o: %.c
 	$(CC) -c -MMD $(CFLAGS) $< -o $@
 
-$(BUILDDIR)%.s: %.c
+%.s: %.c
 	$(CC) -S $(CFLAGS) $< -o $@
 
-# clean everything
-.PHONY: clean
 clean:
 	rm -f $(TARGET)
 	rm -f $(OBJ)
 	rm -f $(DEP)
 	rm -f $(ASM)
-	rm -f $(BUILDDIR)tests/*.toml.*
+	rm -f tests/*.toml.*

README.md

@@ -39,7 +39,7 @@ lfs_t lfs;
 lfs_file_t file;
 
 // configuration of the filesystem is provided by this struct
-const struct lfs_config cfg = {
+const struct lfs_cfg cfg = {
     // block device operations
     .read  = user_provided_block_device_read,
     .prog  = user_provided_block_device_prog,
@@ -192,7 +192,7 @@ More details on how littlefs works can be found in [DESIGN.md](DESIGN.md) and
 ## Testing
 
 The littlefs comes with a test suite designed to run on a PC using the
-[emulated block device](bd/lfs_testbd.h) found in the `bd` directory.
+[emulated block device](emubd/lfs_emubd.h) found in the emubd directory.
 The tests assume a Linux environment and can be started with make:
 
 ``` bash
@@ -221,11 +221,6 @@ License Identifiers that are here available: http://spdx.org/licenses/
 - [littlefs-js] - A javascript wrapper for littlefs. I'm not sure why you would
   want this, but it is handy for demos.  You can see it in action
   [here][littlefs-js-demo].
-  
-- [littlefs-python] - A Python wrapper for littlefs. The project allows you
-  to create images of the filesystem on your PC. Check if littlefs will fit
-  your needs, create images for a later download to the target memory or
-  inspect the content of a binary image of the target memory.
 
 - [mklfs] - A command line tool built by the [Lua RTOS] guys for making
   littlefs images from a host PC. Supports Windows, Mac OS, and Linux.
@@ -255,4 +250,3 @@ License Identifiers that are here available: http://spdx.org/licenses/
 [LittleFileSystem]: https://os.mbed.com/docs/mbed-os/v5.12/apis/littlefilesystem.html
 [SPIFFS]: https://github.com/pellepl/spiffs
 [Dhara]: https://github.com/dlbeer/dhara
-[littlefs-python]: https://pypi.org/project/littlefs-python/

bd/lfs_filebd.c

@@ -10,21 +10,18 @@
 #include <unistd.h>
 #include <errno.h>
 
-int lfs_filebd_createcfg(const struct lfs_config *cfg, const char *path,
-        const struct lfs_filebd_config *bdcfg) {
-    LFS_FILEBD_TRACE("lfs_filebd_createcfg(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
+int lfs_filebd_createcfg(lfs_filebd_t *bd, const char *path,
+        const struct lfs_filebd_cfg *cfg) {
+    LFS_FILEBD_TRACE("lfs_filebd_createcfg(%p, \"%s\", %p {"
                 ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"}, "
-                "\"%s\", "
-                "%p {.erase_value=%"PRId32"})",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count,
-            path, (void*)bdcfg, bdcfg->erase_value);
-    lfs_filebd_t *bd = cfg->context;
-    bd->cfg = bdcfg;
+                ".erase_size=%"PRIu32", .erase_count=%"PRIu32", "
+                ".erase_value=%"PRId32"})",
+            (void*)bd, path, (void*)cfg,
+            cfg->read_size, cfg->prog_size, cfg->erase_size, cfg->erase_count,
+            cfg->erase_value);
+
+    // copy over config
+    bd->cfg = *cfg;
 
     // open file
     bd->fd = open(path, O_RDWR | O_CREAT, 0666);
@@ -38,26 +35,8 @@ int lfs_filebd_createcfg(const struct lfs_config *cfg, const char *path,
     return 0;
 }
 
-int lfs_filebd_create(const struct lfs_config *cfg, const char *path) {
-    LFS_FILEBD_TRACE("lfs_filebd_create(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
-                ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"}, "
-                "\"%s\")",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count,
-            path);
-    static const struct lfs_filebd_config defaults = {.erase_value=-1};
-    int err = lfs_filebd_createcfg(cfg, path, &defaults);
-    LFS_FILEBD_TRACE("lfs_filebd_create -> %d", err);
-    return err;
-}
-
-int lfs_filebd_destroy(const struct lfs_config *cfg) {
-    LFS_FILEBD_TRACE("lfs_filebd_destroy(%p)", (void*)cfg);
-    lfs_filebd_t *bd = cfg->context;
+int lfs_filebd_destroy(lfs_filebd_t *bd) {
+    LFS_FILEBD_TRACE("lfs_filebd_destroy(%p)", (void*)bd);
     int err = close(bd->fd);
     if (err < 0) {
         err = -errno;
@@ -68,26 +47,25 @@ int lfs_filebd_destroy(const struct lfs_config *cfg) {
     return 0;
 }
 
-int lfs_filebd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_filebd_read(lfs_filebd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size) {
     LFS_FILEBD_TRACE("lfs_filebd_read(%p, "
                 "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_filebd_t *bd = cfg->context;
+            (void*)bd, block, off, buffer, size);
 
     // check if read is valid
-    LFS_ASSERT(off  % cfg->read_size == 0);
-    LFS_ASSERT(size % cfg->read_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.read_size == 0);
+    LFS_ASSERT(size % bd->cfg.read_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // zero for reproducability (in case file is truncated)
-    if (bd->cfg->erase_value != -1) {
-        memset(buffer, bd->cfg->erase_value, size);
+    if (bd->cfg.erase_value != -1) {
+        memset(buffer, bd->cfg.erase_value, size);
     }
 
     // read
     off_t res1 = lseek(bd->fd,
-            (off_t)block*cfg->block_size + (off_t)off, SEEK_SET);
+            (off_t)block*bd->cfg.erase_size + (off_t)off, SEEK_SET);
     if (res1 < 0) {
         int err = -errno;
         LFS_FILEBD_TRACE("lfs_filebd_read -> %d", err);
@@ -105,21 +83,21 @@ int lfs_filebd_read(const struct lfs_config *cfg, lfs_block_t block,
     return 0;
 }
 
-int lfs_filebd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_filebd_prog(lfs_filebd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size) {
-    LFS_FILEBD_TRACE("lfs_filebd_prog(%p, 0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_filebd_t *bd = cfg->context;
+    LFS_FILEBD_TRACE("lfs_filebd_prog(%p, "
+                "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
+            (void*)bd, block, off, buffer, size);
 
     // check if write is valid
-    LFS_ASSERT(off  % cfg->prog_size == 0);
-    LFS_ASSERT(size % cfg->prog_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.prog_size == 0);
+    LFS_ASSERT(size % bd->cfg.prog_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // check that data was erased? only needed for testing
-    if (bd->cfg->erase_value != -1) {
+    if (bd->cfg.erase_value != -1) {
         off_t res1 = lseek(bd->fd,
-                (off_t)block*cfg->block_size + (off_t)off, SEEK_SET);
+                (off_t)block*bd->cfg.erase_size + (off_t)off, SEEK_SET);
         if (res1 < 0) {
             int err = -errno;
             LFS_FILEBD_TRACE("lfs_filebd_prog -> %d", err);
@@ -135,13 +113,13 @@ int lfs_filebd_prog(const struct lfs_config *cfg, lfs_block_t block,
                 return err;
             }
 
-            LFS_ASSERT(c == bd->cfg->erase_value);
+            LFS_ASSERT(c == bd->cfg.erase_value);
         }
     }
 
     // program data
     off_t res1 = lseek(bd->fd,
-            (off_t)block*cfg->block_size + (off_t)off, SEEK_SET);
+            (off_t)block*bd->cfg.erase_size + (off_t)off, SEEK_SET);
     if (res1 < 0) {
         int err = -errno;
         LFS_FILEBD_TRACE("lfs_filebd_prog -> %d", err);
@@ -159,24 +137,23 @@ int lfs_filebd_prog(const struct lfs_config *cfg, lfs_block_t block,
     return 0;
 }
 
-int lfs_filebd_erase(const struct lfs_config *cfg, lfs_block_t block) {
-    LFS_FILEBD_TRACE("lfs_filebd_erase(%p, 0x%"PRIx32")", (void*)cfg, block);
-    lfs_filebd_t *bd = cfg->context;
+int lfs_filebd_erase(lfs_filebd_t *bd, lfs_block_t block) {
+    LFS_FILEBD_TRACE("lfs_filebd_erase(%p, 0x%"PRIx32")", (void*)bd, block);
 
     // check if erase is valid
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // erase, only needed for testing
-    if (bd->cfg->erase_value != -1) {
-        off_t res1 = lseek(bd->fd, (off_t)block*cfg->block_size, SEEK_SET);
+    if (bd->cfg.erase_value != -1) {
+        off_t res1 = lseek(bd->fd, (off_t)block*bd->cfg.erase_size, SEEK_SET);
         if (res1 < 0) {
             int err = -errno;
             LFS_FILEBD_TRACE("lfs_filebd_erase -> %d", err);
             return err;
         }
 
-        for (lfs_off_t i = 0; i < cfg->block_size; i++) {
-            ssize_t res2 = write(bd->fd, &(uint8_t){bd->cfg->erase_value}, 1);
+        for (lfs_off_t i = 0; i < bd->cfg.erase_size; i++) {
+            ssize_t res2 = write(bd->fd, &(uint8_t){bd->cfg.erase_value}, 1);
             if (res2 < 0) {
                 int err = -errno;
                 LFS_FILEBD_TRACE("lfs_filebd_erase -> %d", err);
@@ -189,10 +166,10 @@ int lfs_filebd_erase(const struct lfs_config *cfg, lfs_block_t block) {
     return 0;
 }
 
-int lfs_filebd_sync(const struct lfs_config *cfg) {
-    LFS_FILEBD_TRACE("lfs_filebd_sync(%p)", (void*)cfg);
+int lfs_filebd_sync(lfs_filebd_t *bd) {
+    LFS_FILEBD_TRACE("lfs_filebd_sync(%p)", (void*)bd);
+
     // file sync
-    lfs_filebd_t *bd = cfg->context;
     int err = fsync(bd->fd);
     if (err) {
         err = -errno;

bd/lfs_filebd.h

@@ -8,11 +8,9 @@
 #define LFS_FILEBD_H
 
 #include "lfs.h"
-#include "lfs_util.h"
 
 #ifdef __cplusplus
-extern "C"
-{
+extern "C" {
 #endif
 
 
@@ -24,7 +22,21 @@ extern "C"
 #endif
 
 // filebd config (optional)
-struct lfs_filebd_config {
+struct lfs_filebd_cfg {
+    // Minimum size of block read. All read operations must be a
+    // multiple of this value.
+    lfs_size_t read_size;
+
+    // Minimum size of block program. All program operations must be a
+    // multiple of this value.
+    lfs_size_t prog_size;
+
+    // Size of an erasable block.
+    lfs_size_t erase_size;
+
+    // Number of erasable blocks on the device.
+    lfs_size_t erase_count;
+
     // 8-bit erase value to use for simulating erases. -1 does not simulate
     // erases, which can speed up testing by avoiding all the extra block-device
     // operations to store the erase value.
@@ -34,40 +46,39 @@ struct lfs_filebd_config {
 // filebd state
 typedef struct lfs_filebd {
     int fd;
-    const struct lfs_filebd_config *cfg;
+    struct lfs_filebd_cfg cfg;
 } lfs_filebd_t;
 
 
-// Create a file block device using the geometry in lfs_config
-int lfs_filebd_create(const struct lfs_config *cfg, const char *path);
-int lfs_filebd_createcfg(const struct lfs_config *cfg, const char *path,
-        const struct lfs_filebd_config *bdcfg);
+// Create a file block device using the geometry in lfs_filebd_cfg
+int lfs_filebd_createcfg(lfs_filebd_t *bd, const char *path,
+        const struct lfs_filebd_cfg *cfg);
 
 // Clean up memory associated with block device
-int lfs_filebd_destroy(const struct lfs_config *cfg);
+int lfs_filebd_destroy(lfs_filebd_t *bd);
 
 // Read a block
-int lfs_filebd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_filebd_read(lfs_filebd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size);
 
 // Program a block
 //
 // The block must have previously been erased.
-int lfs_filebd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_filebd_prog(lfs_filebd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size);
 
 // Erase a block
 //
 // A block must be erased before being programmed. The
 // state of an erased block is undefined.
-int lfs_filebd_erase(const struct lfs_config *cfg, lfs_block_t block);
+int lfs_filebd_erase(lfs_filebd_t *bd, lfs_block_t block);
 
 // Sync the block device
-int lfs_filebd_sync(const struct lfs_config *cfg);
+int lfs_filebd_sync(lfs_filebd_t *bd);
 
 
 #ifdef __cplusplus
-} /* extern "C" */
+}
 #endif
 
 #endif

bd/lfs_rambd.c

@@ -6,26 +6,24 @@
  */
 #include "bd/lfs_rambd.h"
 
-int lfs_rambd_createcfg(const struct lfs_config *cfg,
-        const struct lfs_rambd_config *bdcfg) {
-    LFS_RAMBD_TRACE("lfs_rambd_createcfg(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
+int lfs_rambd_createcfg(lfs_rambd_t *bd,
+        const struct lfs_rambd_cfg *cfg) {
+    LFS_RAMBD_TRACE("lfs_filebd_createcfg(%p, %p {"
                 ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"}, "
-                "%p {.erase_value=%"PRId32", .buffer=%p})",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count,
-            (void*)bdcfg, bdcfg->erase_value, bdcfg->buffer);
-    lfs_rambd_t *bd = cfg->context;
-    bd->cfg = bdcfg;
+                ".erase_size=%"PRIu32", .erase_count=%"PRIu32", "
+                ".erase_value=%"PRId32", .buffer=%p})",
+            (void*)bd, (void*)cfg,
+            cfg->read_size, cfg->prog_size, cfg->erase_size, cfg->erase_count,
+            cfg->erase_value, cfg->buffer);
+
+    // copy over config
+    bd->cfg = *cfg;
 
     // allocate buffer?
-    if (bd->cfg->buffer) {
-        bd->buffer = bd->cfg->buffer;
+    if (bd->cfg.buffer) {
+        bd->buffer = bd->cfg.buffer;
     } else {
-        bd->buffer = lfs_malloc(cfg->block_size * cfg->block_count);
+        bd->buffer = lfs_malloc(bd->cfg.erase_size * bd->cfg.erase_count);
         if (!bd->buffer) {
             LFS_RAMBD_TRACE("lfs_rambd_createcfg -> %d", LFS_ERR_NOMEM);
             return LFS_ERR_NOMEM;
@@ -33,108 +31,89 @@ int lfs_rambd_createcfg(const struct lfs_config *cfg,
     }
 
     // zero for reproducability?
-    if (bd->cfg->erase_value != -1) {
-        memset(bd->buffer, bd->cfg->erase_value,
-                cfg->block_size * cfg->block_count);
+    if (bd->cfg.erase_value != -1) {
+        memset(bd->buffer, bd->cfg.erase_value,
+                bd->cfg.erase_size * bd->cfg.erase_count);
     }
 
     LFS_RAMBD_TRACE("lfs_rambd_createcfg -> %d", 0);
     return 0;
 }
 
-int lfs_rambd_create(const struct lfs_config *cfg) {
-    LFS_RAMBD_TRACE("lfs_rambd_create(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
-                ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"})",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count);
-    static const struct lfs_rambd_config defaults = {.erase_value=-1};
-    int err = lfs_rambd_createcfg(cfg, &defaults);
-    LFS_RAMBD_TRACE("lfs_rambd_create -> %d", err);
-    return err;
-}
-
-int lfs_rambd_destroy(const struct lfs_config *cfg) {
-    LFS_RAMBD_TRACE("lfs_rambd_destroy(%p)", (void*)cfg);
+int lfs_rambd_destroy(lfs_rambd_t *bd) {
+    LFS_RAMBD_TRACE("lfs_rambd_destroy(%p)", (void*)bd);
     // clean up memory
-    lfs_rambd_t *bd = cfg->context;
-    if (!bd->cfg->buffer) {
+    if (!bd->cfg.buffer) {
         lfs_free(bd->buffer);
     }
     LFS_RAMBD_TRACE("lfs_rambd_destroy -> %d", 0);
     return 0;
 }
 
-int lfs_rambd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_rambd_read(lfs_rambd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size) {
     LFS_RAMBD_TRACE("lfs_rambd_read(%p, "
                 "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_rambd_t *bd = cfg->context;
+            (void*)bd, block, off, buffer, size);
 
     // check if read is valid
-    LFS_ASSERT(off  % cfg->read_size == 0);
-    LFS_ASSERT(size % cfg->read_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.read_size == 0);
+    LFS_ASSERT(size % bd->cfg.read_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // read data
-    memcpy(buffer, &bd->buffer[block*cfg->block_size + off], size);
+    memcpy(buffer, &bd->buffer[block*bd->cfg.erase_size + off], size);
 
     LFS_RAMBD_TRACE("lfs_rambd_read -> %d", 0);
     return 0;
 }
 
-int lfs_rambd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_rambd_prog(lfs_rambd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size) {
     LFS_RAMBD_TRACE("lfs_rambd_prog(%p, "
                 "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_rambd_t *bd = cfg->context;
+            (void*)bd, block, off, buffer, size);
 
     // check if write is valid
-    LFS_ASSERT(off  % cfg->prog_size == 0);
-    LFS_ASSERT(size % cfg->prog_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.prog_size == 0);
+    LFS_ASSERT(size % bd->cfg.prog_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // check that data was erased? only needed for testing
-    if (bd->cfg->erase_value != -1) {
+    if (bd->cfg.erase_value != -1) {
         for (lfs_off_t i = 0; i < size; i++) {
-            LFS_ASSERT(bd->buffer[block*cfg->block_size + off + i] ==
-                    bd->cfg->erase_value);
+            LFS_ASSERT(bd->buffer[block*bd->cfg.erase_size + off + i] ==
+                    bd->cfg.erase_value);
         }
     }
 
     // program data
-    memcpy(&bd->buffer[block*cfg->block_size + off], buffer, size);
+    memcpy(&bd->buffer[block*bd->cfg.erase_size + off], buffer, size);
 
     LFS_RAMBD_TRACE("lfs_rambd_prog -> %d", 0);
     return 0;
 }
 
-int lfs_rambd_erase(const struct lfs_config *cfg, lfs_block_t block) {
-    LFS_RAMBD_TRACE("lfs_rambd_erase(%p, 0x%"PRIx32")", (void*)cfg, block);
-    lfs_rambd_t *bd = cfg->context;
+int lfs_rambd_erase(lfs_rambd_t *bd, lfs_block_t block) {
+    LFS_RAMBD_TRACE("lfs_rambd_erase(%p, 0x%"PRIx32")", (void*)bd, block);
 
     // check if erase is valid
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // erase, only needed for testing
-    if (bd->cfg->erase_value != -1) {
-        memset(&bd->buffer[block*cfg->block_size],
-                bd->cfg->erase_value, cfg->block_size);
+    if (bd->cfg.erase_value != -1) {
+        memset(&bd->buffer[block*bd->cfg.erase_size],
+                bd->cfg.erase_value, bd->cfg.erase_size);
     }
 
     LFS_RAMBD_TRACE("lfs_rambd_erase -> %d", 0);
     return 0;
 }
 
-int lfs_rambd_sync(const struct lfs_config *cfg) {
-    LFS_RAMBD_TRACE("lfs_rambd_sync(%p)", (void*)cfg);
+int lfs_rambd_sync(lfs_rambd_t *bd) {
+    LFS_RAMBD_TRACE("lfs_rambd_sync(%p)", (void*)bd);
     // sync does nothing because we aren't backed by anything real
-    (void)cfg;
+    (void)bd;
     LFS_RAMBD_TRACE("lfs_rambd_sync -> %d", 0);
     return 0;
 }

bd/lfs_rambd.h

@@ -8,11 +8,9 @@
 #define LFS_RAMBD_H
 
 #include "lfs.h"
-#include "lfs_util.h"
 
 #ifdef __cplusplus
-extern "C"
-{
+extern "C" {
 #endif
 
 
@@ -24,7 +22,21 @@ extern "C"
 #endif
 
 // rambd config (optional)
-struct lfs_rambd_config {
+struct lfs_rambd_cfg {
+    // Minimum size of block read. All read operations must be a
+    // multiple of this value.
+    lfs_size_t read_size;
+
+    // Minimum size of block program. All program operations must be a
+    // multiple of this value.
+    lfs_size_t prog_size;
+
+    // Size of an erasable block.
+    lfs_size_t erase_size;
+
+    // Number of erasable blocks on the device.
+    lfs_size_t erase_count;
+
     // 8-bit erase value to simulate erasing with. -1 indicates no erase
     // occurs, which is still a valid block device
     int32_t erase_value;
@@ -36,40 +48,39 @@ struct lfs_rambd_config {
 // rambd state
 typedef struct lfs_rambd {
     uint8_t *buffer;
-    const struct lfs_rambd_config *cfg;
+    struct lfs_rambd_cfg cfg;
 } lfs_rambd_t;
 
 
-// Create a RAM block device using the geometry in lfs_config
-int lfs_rambd_create(const struct lfs_config *cfg);
-int lfs_rambd_createcfg(const struct lfs_config *cfg,
-        const struct lfs_rambd_config *bdcfg);
+// Create a RAM block device using the geometry in lfs_cfg
+int lfs_rambd_createcfg(lfs_rambd_t *bd,
+        const struct lfs_rambd_cfg *cfg);
 
 // Clean up memory associated with block device
-int lfs_rambd_destroy(const struct lfs_config *cfg);
+int lfs_rambd_destroy(lfs_rambd_t *bd);
 
 // Read a block
-int lfs_rambd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_rambd_read(lfs_rambd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size);
 
 // Program a block
 //
 // The block must have previously been erased.
-int lfs_rambd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_rambd_prog(lfs_rambd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size);
 
 // Erase a block
 //
 // A block must be erased before being programmed. The
 // state of an erased block is undefined.
-int lfs_rambd_erase(const struct lfs_config *cfg, lfs_block_t block);
+int lfs_rambd_erase(lfs_rambd_t *bd, lfs_block_t block);
 
 // Sync the block device
-int lfs_rambd_sync(const struct lfs_config *cfg);
+int lfs_rambd_sync(lfs_rambd_t *bd);
 
 
 #ifdef __cplusplus
-} /* extern "C" */
+}
 #endif
 
 #endif

bd/lfs_testbd.c

@@ -10,185 +10,164 @@
 #include <stdlib.h>
 
 
-int lfs_testbd_createcfg(const struct lfs_config *cfg, const char *path,
-        const struct lfs_testbd_config *bdcfg) {
-    LFS_TESTBD_TRACE("lfs_testbd_createcfg(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
+int lfs_testbd_createcfg(lfs_testbd_t *bd, const char *path,
+        const struct lfs_testbd_cfg *cfg) {
+    LFS_TESTBD_TRACE("lfs_testbd_createcfg(%p, \"%s\", %p {"
                 ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"}, "
-                "\"%s\", "
-                "%p {.erase_value=%"PRId32", .erase_cycles=%"PRIu32", "
+                ".erase_size=%"PRIu32", .erase_count=%"PRIu32", "
+                ".erase_value=%"PRId32", .erase_cycles=%"PRIu32", "
                 ".badblock_behavior=%"PRIu8", .power_cycles=%"PRIu32", "
                 ".buffer=%p, .wear_buffer=%p})",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count,
-            path, (void*)bdcfg, bdcfg->erase_value, bdcfg->erase_cycles,
-            bdcfg->badblock_behavior, bdcfg->power_cycles,
-            bdcfg->buffer, bdcfg->wear_buffer);
-    lfs_testbd_t *bd = cfg->context;
-    bd->cfg = bdcfg;
+            (void*)bd, path, (void*)cfg,
+            cfg->read_size, cfg->prog_size, cfg->erase_size, cfg->erase_count,
+            cfg->erase_value, cfg->erase_cycles,
+            cfg->badblock_behavior, cfg->power_cycles,
+            cfg->buffer, cfg->wear_buffer);
+
+    // copy over config
+    bd->cfg = *cfg;
 
     // setup testing things
     bd->persist = path;
-    bd->power_cycles = bd->cfg->power_cycles;
+    bd->power_cycles = bd->cfg.power_cycles;
 
-    if (bd->cfg->erase_cycles) {
-        if (bd->cfg->wear_buffer) {
-            bd->wear = bd->cfg->wear_buffer;
+    if (bd->cfg.erase_cycles) {
+        if (bd->cfg.wear_buffer) {
+            bd->wear = bd->cfg.wear_buffer;
         } else {
-            bd->wear = lfs_malloc(sizeof(lfs_testbd_wear_t)*cfg->block_count);
+            bd->wear = lfs_malloc(sizeof(lfs_testbd_wear_t)*cfg->erase_count);
             if (!bd->wear) {
                 LFS_TESTBD_TRACE("lfs_testbd_createcfg -> %d", LFS_ERR_NOMEM);
                 return LFS_ERR_NOMEM;
             }
         }
 
-        memset(bd->wear, 0, sizeof(lfs_testbd_wear_t) * cfg->block_count);
+        memset(bd->wear, 0, sizeof(lfs_testbd_wear_t) * bd->cfg.erase_count);
     }
 
     // create underlying block device
     if (bd->persist) {
-        bd->u.file.cfg = (struct lfs_filebd_config){
-            .erase_value = bd->cfg->erase_value,
-        };
-        int err = lfs_filebd_createcfg(cfg, path, &bd->u.file.cfg);
+        int err = lfs_filebd_createcfg(&bd->impl.filebd, path,
+                &(struct lfs_filebd_cfg){
+                    .read_size=bd->cfg.read_size,
+                    .prog_size=bd->cfg.prog_size,
+                    .erase_size=bd->cfg.erase_size,
+                    .erase_count=bd->cfg.erase_count,
+                    .erase_value=bd->cfg.erase_value});
         LFS_TESTBD_TRACE("lfs_testbd_createcfg -> %d", err);
         return err;
     } else {
-        bd->u.ram.cfg = (struct lfs_rambd_config){
-            .erase_value = bd->cfg->erase_value,
-            .buffer = bd->cfg->buffer,
-        };
-        int err = lfs_rambd_createcfg(cfg, &bd->u.ram.cfg);
+        int err = lfs_rambd_createcfg(&bd->impl.rambd,
+                &(struct lfs_rambd_cfg){
+                    .read_size=bd->cfg.read_size,
+                    .prog_size=bd->cfg.prog_size,
+                    .erase_size=bd->cfg.erase_size,
+                    .erase_count=bd->cfg.erase_count,
+                    .erase_value=bd->cfg.erase_value,
+                    .buffer=bd->cfg.buffer});
         LFS_TESTBD_TRACE("lfs_testbd_createcfg -> %d", err);
         return err;
     }
 }
 
-int lfs_testbd_create(const struct lfs_config *cfg, const char *path) {
-    LFS_TESTBD_TRACE("lfs_testbd_create(%p {.context=%p, "
-                ".read=%p, .prog=%p, .erase=%p, .sync=%p, "
-                ".read_size=%"PRIu32", .prog_size=%"PRIu32", "
-                ".block_size=%"PRIu32", .block_count=%"PRIu32"}, "
-                "\"%s\")",
-            (void*)cfg, cfg->context,
-            (void*)(uintptr_t)cfg->read, (void*)(uintptr_t)cfg->prog,
-            (void*)(uintptr_t)cfg->erase, (void*)(uintptr_t)cfg->sync,
-            cfg->read_size, cfg->prog_size, cfg->block_size, cfg->block_count,
-            path);
-    static const struct lfs_testbd_config defaults = {.erase_value=-1};
-    int err = lfs_testbd_createcfg(cfg, path, &defaults);
-    LFS_TESTBD_TRACE("lfs_testbd_create -> %d", err);
-    return err;
-}
-
-int lfs_testbd_destroy(const struct lfs_config *cfg) {
-    LFS_TESTBD_TRACE("lfs_testbd_destroy(%p)", (void*)cfg);
-    lfs_testbd_t *bd = cfg->context;
-    if (bd->cfg->erase_cycles && !bd->cfg->wear_buffer) {
+int lfs_testbd_destroy(lfs_testbd_t *bd) {
+    LFS_TESTBD_TRACE("lfs_testbd_destroy(%p)", (void*)bd);
+    if (bd->cfg.erase_cycles && !bd->cfg.wear_buffer) {
         lfs_free(bd->wear);
     }
 
     if (bd->persist) {
-        int err = lfs_filebd_destroy(cfg);
+        int err = lfs_filebd_destroy(&bd->impl.filebd);
         LFS_TESTBD_TRACE("lfs_testbd_destroy -> %d", err);
         return err;
     } else {
-        int err = lfs_rambd_destroy(cfg);
+        int err = lfs_rambd_destroy(&bd->impl.rambd);
         LFS_TESTBD_TRACE("lfs_testbd_destroy -> %d", err);
         return err;
     }
 }
 
 /// Internal mapping to block devices ///
-static int lfs_testbd_rawread(const struct lfs_config *cfg, lfs_block_t block,
+static int lfs_testbd_rawread(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size) {
-    lfs_testbd_t *bd = cfg->context;
     if (bd->persist) {
-        return lfs_filebd_read(cfg, block, off, buffer, size);
+        return lfs_filebd_read(&bd->impl.filebd, block, off, buffer, size);
     } else {
-        return lfs_rambd_read(cfg, block, off, buffer, size);
+        return lfs_rambd_read(&bd->impl.rambd, block, off, buffer, size);
     }
 }
 
-static int lfs_testbd_rawprog(const struct lfs_config *cfg, lfs_block_t block,
+static int lfs_testbd_rawprog(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size) {
-    lfs_testbd_t *bd = cfg->context;
     if (bd->persist) {
-        return lfs_filebd_prog(cfg, block, off, buffer, size);
+        return lfs_filebd_prog(&bd->impl.filebd, block, off, buffer, size);
     } else {
-        return lfs_rambd_prog(cfg, block, off, buffer, size);
+        return lfs_rambd_prog(&bd->impl.rambd, block, off, buffer, size);
     }
 }
 
-static int lfs_testbd_rawerase(const struct lfs_config *cfg,
+static int lfs_testbd_rawerase(lfs_testbd_t *bd,
         lfs_block_t block) {
-    lfs_testbd_t *bd = cfg->context;
     if (bd->persist) {
-        return lfs_filebd_erase(cfg, block);
+        return lfs_filebd_erase(&bd->impl.filebd, block);
     } else {
-        return lfs_rambd_erase(cfg, block);
+        return lfs_rambd_erase(&bd->impl.rambd, block);
     }
 }
 
-static int lfs_testbd_rawsync(const struct lfs_config *cfg) {
-    lfs_testbd_t *bd = cfg->context;
+static int lfs_testbd_rawsync(lfs_testbd_t *bd) {
     if (bd->persist) {
-        return lfs_filebd_sync(cfg);
+        return lfs_filebd_sync(&bd->impl.filebd);
     } else {
-        return lfs_rambd_sync(cfg);
+        return lfs_rambd_sync(&bd->impl.rambd);
     }
 }
 
 /// block device API ///
-int lfs_testbd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_testbd_read(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size) {
     LFS_TESTBD_TRACE("lfs_testbd_read(%p, "
                 "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_testbd_t *bd = cfg->context;
+            (void*)bd, block, off, buffer, size);
 
     // check if read is valid
-    LFS_ASSERT(off  % cfg->read_size == 0);
-    LFS_ASSERT(size % cfg->read_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.read_size == 0);
+    LFS_ASSERT(size % bd->cfg.read_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // block bad?
-    if (bd->cfg->erase_cycles && bd->wear[block] >= bd->cfg->erase_cycles &&
-            bd->cfg->badblock_behavior == LFS_TESTBD_BADBLOCK_READERROR) {
+    if (bd->cfg.erase_cycles && bd->wear[block] >= bd->cfg.erase_cycles &&
+            bd->cfg.badblock_behavior == LFS_TESTBD_BADBLOCK_READERROR) {
         LFS_TESTBD_TRACE("lfs_testbd_read -> %d", LFS_ERR_CORRUPT);
         return LFS_ERR_CORRUPT;
     }
 
     // read
-    int err = lfs_testbd_rawread(cfg, block, off, buffer, size);
+    int err = lfs_testbd_rawread(bd, block, off, buffer, size);
     LFS_TESTBD_TRACE("lfs_testbd_read -> %d", err);
     return err;
 }
 
-int lfs_testbd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_testbd_prog(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size) {
     LFS_TESTBD_TRACE("lfs_testbd_prog(%p, "
                 "0x%"PRIx32", %"PRIu32", %p, %"PRIu32")",
-            (void*)cfg, block, off, buffer, size);
-    lfs_testbd_t *bd = cfg->context;
+            (void*)bd, block, off, buffer, size);
 
     // check if write is valid
-    LFS_ASSERT(off  % cfg->prog_size == 0);
-    LFS_ASSERT(size % cfg->prog_size == 0);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(off  % bd->cfg.prog_size == 0);
+    LFS_ASSERT(size % bd->cfg.prog_size == 0);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // block bad?
-    if (bd->cfg->erase_cycles && bd->wear[block] >= bd->cfg->erase_cycles) {
-        if (bd->cfg->badblock_behavior ==
+    if (bd->cfg.erase_cycles && bd->wear[block] >= bd->cfg.erase_cycles) {
+        if (bd->cfg.badblock_behavior ==
                 LFS_TESTBD_BADBLOCK_PROGERROR) {
             LFS_TESTBD_TRACE("lfs_testbd_prog -> %d", LFS_ERR_CORRUPT);
             return LFS_ERR_CORRUPT;
-        } else if (bd->cfg->badblock_behavior ==
+        } else if (bd->cfg.badblock_behavior ==
                 LFS_TESTBD_BADBLOCK_PROGNOOP ||
-                bd->cfg->badblock_behavior ==
+                bd->cfg.badblock_behavior ==
                 LFS_TESTBD_BADBLOCK_ERASENOOP) {
             LFS_TESTBD_TRACE("lfs_testbd_prog -> %d", 0);
             return 0;
@@ -196,7 +175,7 @@ int lfs_testbd_prog(const struct lfs_config *cfg, lfs_block_t block,
     }
 
     // prog
-    int err = lfs_testbd_rawprog(cfg, block, off, buffer, size);
+    int err = lfs_testbd_rawprog(bd, block, off, buffer, size);
     if (err) {
         LFS_TESTBD_TRACE("lfs_testbd_prog -> %d", err);
         return err;
@@ -207,7 +186,7 @@ int lfs_testbd_prog(const struct lfs_config *cfg, lfs_block_t block,
         bd->power_cycles -= 1;
         if (bd->power_cycles == 0) {
             // sync to make sure we persist the last changes
-            LFS_ASSERT(lfs_testbd_rawsync(cfg) == 0);
+            assert(lfs_testbd_rawsync(bd) == 0);
             // simulate power loss
             exit(33);
         }
@@ -217,21 +196,20 @@ int lfs_testbd_prog(const struct lfs_config *cfg, lfs_block_t block,
     return 0;
 }
 
-int lfs_testbd_erase(const struct lfs_config *cfg, lfs_block_t block) {
-    LFS_TESTBD_TRACE("lfs_testbd_erase(%p, 0x%"PRIx32")", (void*)cfg, block);
-    lfs_testbd_t *bd = cfg->context;
+int lfs_testbd_erase(lfs_testbd_t *bd, lfs_block_t block) {
+    LFS_TESTBD_TRACE("lfs_testbd_erase(%p, 0x%"PRIx32")", (void*)bd, block);
 
     // check if erase is valid
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     // block bad?
-    if (bd->cfg->erase_cycles) {
-        if (bd->wear[block] >= bd->cfg->erase_cycles) {
-            if (bd->cfg->badblock_behavior ==
+    if (bd->cfg.erase_cycles) {
+        if (bd->wear[block] >= bd->cfg.erase_cycles) {
+            if (bd->cfg.badblock_behavior ==
                     LFS_TESTBD_BADBLOCK_ERASEERROR) {
                 LFS_TESTBD_TRACE("lfs_testbd_erase -> %d", LFS_ERR_CORRUPT);
                 return LFS_ERR_CORRUPT;
-            } else if (bd->cfg->badblock_behavior ==
+            } else if (bd->cfg.badblock_behavior ==
                     LFS_TESTBD_BADBLOCK_ERASENOOP) {
                 LFS_TESTBD_TRACE("lfs_testbd_erase -> %d", 0);
                 return 0;
@@ -243,7 +221,7 @@ int lfs_testbd_erase(const struct lfs_config *cfg, lfs_block_t block) {
     }
 
     // erase
-    int err = lfs_testbd_rawerase(cfg, block);
+    int err = lfs_testbd_rawerase(bd, block);
     if (err) {
         LFS_TESTBD_TRACE("lfs_testbd_erase -> %d", err);
         return err;
@@ -254,7 +232,7 @@ int lfs_testbd_erase(const struct lfs_config *cfg, lfs_block_t block) {
         bd->power_cycles -= 1;
         if (bd->power_cycles == 0) {
             // sync to make sure we persist the last changes
-            LFS_ASSERT(lfs_testbd_rawsync(cfg) == 0);
+            assert(lfs_testbd_rawsync(bd) == 0);
             // simulate power loss
             exit(33);
         }
@@ -264,36 +242,34 @@ int lfs_testbd_erase(const struct lfs_config *cfg, lfs_block_t block) {
     return 0;
 }
 
-int lfs_testbd_sync(const struct lfs_config *cfg) {
-    LFS_TESTBD_TRACE("lfs_testbd_sync(%p)", (void*)cfg);
-    int err = lfs_testbd_rawsync(cfg);
+int lfs_testbd_sync(lfs_testbd_t *bd) {
+    LFS_TESTBD_TRACE("lfs_testbd_sync(%p)", (void*)bd);
+    int err = lfs_testbd_rawsync(bd);
     LFS_TESTBD_TRACE("lfs_testbd_sync -> %d", err);
     return err;
 }
 
 
 /// simulated wear operations ///
-lfs_testbd_swear_t lfs_testbd_getwear(const struct lfs_config *cfg,
+lfs_testbd_swear_t lfs_testbd_getwear(lfs_testbd_t *bd,
         lfs_block_t block) {
-    LFS_TESTBD_TRACE("lfs_testbd_getwear(%p, %"PRIu32")", (void*)cfg, block);
-    lfs_testbd_t *bd = cfg->context;
+    LFS_TESTBD_TRACE("lfs_testbd_getwear(%p, %"PRIu32")", (void*)bd, block);
 
     // check if block is valid
-    LFS_ASSERT(bd->cfg->erase_cycles);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(bd->cfg.erase_cycles);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     LFS_TESTBD_TRACE("lfs_testbd_getwear -> %"PRIu32, bd->wear[block]);
     return bd->wear[block];
 }
 
-int lfs_testbd_setwear(const struct lfs_config *cfg,
+int lfs_testbd_setwear(lfs_testbd_t *bd,
         lfs_block_t block, lfs_testbd_wear_t wear) {
-    LFS_TESTBD_TRACE("lfs_testbd_setwear(%p, %"PRIu32")", (void*)cfg, block);
-    lfs_testbd_t *bd = cfg->context;
+    LFS_TESTBD_TRACE("lfs_testbd_setwear(%p, %"PRIu32")", (void*)bd, block);
 
     // check if block is valid
-    LFS_ASSERT(bd->cfg->erase_cycles);
-    LFS_ASSERT(block < cfg->block_count);
+    LFS_ASSERT(bd->cfg.erase_cycles);
+    LFS_ASSERT(block < bd->cfg.erase_count);
 
     bd->wear[block] = wear;
 

bd/lfs_testbd.h

@@ -9,13 +9,11 @@
 #define LFS_TESTBD_H
 
 #include "lfs.h"
-#include "lfs_util.h"
 #include "bd/lfs_rambd.h"
 #include "bd/lfs_filebd.h"
 
 #ifdef __cplusplus
-extern "C"
-{
+extern "C" {
 #endif
 
 
@@ -45,7 +43,21 @@ typedef uint32_t lfs_testbd_wear_t;
 typedef int32_t  lfs_testbd_swear_t;
 
 // testbd config, this is required for testing
-struct lfs_testbd_config {
+struct lfs_testbd_cfg {
+    // Minimum size of block read. All read operations must be a
+    // multiple of this value.
+    lfs_size_t read_size;
+
+    // Minimum size of block program. All program operations must be a
+    // multiple of this value.
+    lfs_size_t prog_size;
+
+    // Size of an erasable block.
+    lfs_size_t erase_size;
+
+    // Number of erasable blocks on the device.
+    lfs_size_t erase_count;
+
     // 8-bit erase value to use for simulating erases. -1 does not simulate
     // erases, which can speed up testing by avoiding all the extra block-device
     // operations to store the erase value.
@@ -72,70 +84,63 @@ struct lfs_testbd_config {
 // testbd state
 typedef struct lfs_testbd {
     union {
-        struct {
-            lfs_filebd_t bd;
-            struct lfs_filebd_config cfg;
-        } file;
-        struct {
-            lfs_rambd_t bd;
-            struct lfs_rambd_config cfg;
-        } ram;
-    } u;
+        lfs_filebd_t filebd;
+        lfs_rambd_t rambd;
+    } impl;
 
     bool persist;
     uint32_t power_cycles;
     lfs_testbd_wear_t *wear;
 
-    const struct lfs_testbd_config *cfg;
+    struct lfs_testbd_cfg cfg;
 } lfs_testbd_t;
 
 
 /// Block device API ///
 
-// Create a test block device using the geometry in lfs_config
+// Create a test block device using the geometry in lfs_cfg
 //
 // Note that filebd is used if a path is provided, if path is NULL
 // testbd will use rambd which can be much faster.
-int lfs_testbd_create(const struct lfs_config *cfg, const char *path);
-int lfs_testbd_createcfg(const struct lfs_config *cfg, const char *path,
-        const struct lfs_testbd_config *bdcfg);
+int lfs_testbd_createcfg(lfs_testbd_t *bd, const char *path,
+        const struct lfs_testbd_cfg *cfg);
 
 // Clean up memory associated with block device
-int lfs_testbd_destroy(const struct lfs_config *cfg);
+int lfs_testbd_destroy(lfs_testbd_t *bd);
 
 // Read a block
-int lfs_testbd_read(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_testbd_read(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, void *buffer, lfs_size_t size);
 
 // Program a block
 //
 // The block must have previously been erased.
-int lfs_testbd_prog(const struct lfs_config *cfg, lfs_block_t block,
+int lfs_testbd_prog(lfs_testbd_t *bd, lfs_block_t block,
         lfs_off_t off, const void *buffer, lfs_size_t size);
 
 // Erase a block
 //
 // A block must be erased before being programmed. The
 // state of an erased block is undefined.
-int lfs_testbd_erase(const struct lfs_config *cfg, lfs_block_t block);
+int lfs_testbd_erase(lfs_testbd_t *bd, lfs_block_t block);
 
 // Sync the block device
-int lfs_testbd_sync(const struct lfs_config *cfg);
+int lfs_testbd_sync(lfs_testbd_t *bd);
 
 
 /// Additional extended API for driving test features ///
 
 // Get simulated wear on a given block
-lfs_testbd_swear_t lfs_testbd_getwear(const struct lfs_config *cfg,
+lfs_testbd_swear_t lfs_testbd_getwear(lfs_testbd_t *bd,
         lfs_block_t block);
 
 // Manually set simulated wear on a given block
-int lfs_testbd_setwear(const struct lfs_config *cfg,
+int lfs_testbd_setwear(lfs_testbd_t *bd,
         lfs_block_t block, lfs_testbd_wear_t wear);
 
 
 #ifdef __cplusplus
-} /* extern "C" */
+}
 #endif
 
 #endif

lfs.h

@@ -7,13 +7,10 @@
 #ifndef LFS_H
 #define LFS_H
 
-#include <stdint.h>
-#include <stdbool.h>
 #include "lfs_util.h"
 
 #ifdef __cplusplus
-extern "C"
-{
+extern "C" {
 #endif
 
 
@@ -22,7 +19,7 @@ extern "C"
 // Software library version
 // Major (top-nibble), incremented on backwards incompatible changes
 // Minor (bottom-nibble), incremented on feature additions
-#define LFS_VERSION 0x00020004
+#define LFS_VERSION 0x00020002
 #define LFS_VERSION_MAJOR (0xffff & (LFS_VERSION >> 16))
 #define LFS_VERSION_MINOR (0xffff & (LFS_VERSION >>  0))
 
@@ -67,26 +64,6 @@ typedef uint32_t lfs_block_t;
 #define LFS_ATTR_MAX 1022
 #endif
 
-// Possible error codes, these are negative to allow
-// valid positive return values
-enum lfs_error {
-    LFS_ERR_OK          = 0,    // No error
-    LFS_ERR_IO          = -5,   // Error during device operation
-    LFS_ERR_CORRUPT     = -84,  // Corrupted
-    LFS_ERR_NOENT       = -2,   // No directory entry
-    LFS_ERR_EXIST       = -17,  // Entry already exists
-    LFS_ERR_NOTDIR      = -20,  // Entry is not a dir
-    LFS_ERR_ISDIR       = -21,  // Entry is a dir
-    LFS_ERR_NOTEMPTY    = -39,  // Dir is not empty
-    LFS_ERR_BADF        = -9,   // Bad file number
-    LFS_ERR_FBIG        = -27,  // File too large
-    LFS_ERR_INVAL       = -22,  // Invalid parameter
-    LFS_ERR_NOSPC       = -28,  // No space left on device
-    LFS_ERR_NOMEM       = -12,  // No more memory available
-    LFS_ERR_NOATTR      = -61,  // No data/attr available
-    LFS_ERR_NAMETOOLONG = -36,  // File name too long
-};
-
 // File types
 enum lfs_type {
     // file types
@@ -124,25 +101,20 @@ enum lfs_type {
 enum lfs_open_flags {
     // open flags
     LFS_O_RDONLY = 1,         // Open a file as read only
-#ifndef LFS_READONLY
     LFS_O_WRONLY = 2,         // Open a file as write only
     LFS_O_RDWR   = 3,         // Open a file as read and write
     LFS_O_CREAT  = 0x0100,    // Create a file if it does not exist
     LFS_O_EXCL   = 0x0200,    // Fail if a file already exists
     LFS_O_TRUNC  = 0x0400,    // Truncate the existing file to zero size
     LFS_O_APPEND = 0x0800,    // Move to end of file on every write
-#endif
 
     // internally used flags
-#ifndef LFS_READONLY
     LFS_F_DIRTY   = 0x010000, // File does not match storage
     LFS_F_WRITING = 0x020000, // File has been written since last flush
-#endif
     LFS_F_READING = 0x040000, // File has been read since last flush
-#ifndef LFS_READONLY
-    LFS_F_ERRED   = 0x080000, // An error occurred during write
-#endif
+    LFS_F_ERRED   = 0x080000, // An error occured during write
     LFS_F_INLINE  = 0x100000, // Currently inlined in directory entry
+    LFS_F_OPENED  = 0x200000, // File has been opened
 };
 
 // File seek flags
@@ -153,42 +125,33 @@ enum lfs_whence_flags {
 };
 
 
+#if !defined(LFS_STATICCFG)
 // Configuration provided during initialization of the littlefs
-struct lfs_config {
+struct lfs_cfg {
     // Opaque user provided context that can be used to pass
     // information to the block device operations
-    void *context;
+    void *ctx;
 
     // Read a region in a block. Negative error codes are propogated
     // to the user.
-    int (*read)(const struct lfs_config *c, lfs_block_t block,
+    int (*read)(void *ctx, lfs_block_t block,
             lfs_off_t off, void *buffer, lfs_size_t size);
 
     // Program a region in a block. The block must have previously
     // been erased. Negative error codes are propogated to the user.
     // May return LFS_ERR_CORRUPT if the block should be considered bad.
-    int (*prog)(const struct lfs_config *c, lfs_block_t block,
+    int (*prog)(void *ctx, lfs_block_t block,
             lfs_off_t off, const void *buffer, lfs_size_t size);
 
     // Erase a block. A block must be erased before being programmed.
     // The state of an erased block is undefined. Negative error codes
     // are propogated to the user.
     // May return LFS_ERR_CORRUPT if the block should be considered bad.
-    int (*erase)(const struct lfs_config *c, lfs_block_t block);
+    int (*erase)(void *ctx, lfs_block_t block);
 
     // Sync the state of the underlying block device. Negative error codes
     // are propogated to the user.
-    int (*sync)(const struct lfs_config *c);
-
-#ifdef LFS_THREADSAFE
-    // Lock the underlying block device. Negative error codes
-    // are propogated to the user.
-    int (*lock)(const struct lfs_config *c);
-
-    // Unlock the underlying block device. Negative error codes
-    // are propogated to the user.
-    int (*unlock)(const struct lfs_config *c);
-#endif
+    int (*sync)(void *ctx);
 
     // Minimum size of a block read. All read operations will be a
     // multiple of this value.
@@ -207,7 +170,7 @@ struct lfs_config {
     // Number of erasable blocks on the device.
     lfs_size_t block_count;
 
-    // Number of erase cycles before littlefs evicts metadata logs and moves
+    // Number of erase cycles before littlefs evicts metadata logs and moves 
     // the metadata to another block. Suggested values are in the
     // range 100-1000, with large values having better performance at the cost
     // of less consistent wear distribution.
@@ -256,13 +219,91 @@ struct lfs_config {
     // larger attributes size but must be <= LFS_ATTR_MAX. Defaults to
     // LFS_ATTR_MAX when zero.
     lfs_size_t attr_max;
-
-    // Optional upper limit on total space given to metadata pairs in bytes. On
-    // devices with large blocks (e.g. 128kB) setting this to a low size (2-8kB)
-    // can help bound the metadata compaction time. Must be <= block_size.
-    // Defaults to block_size when zero.
-    lfs_size_t metadata_max;
 };
+#else
+// Static configuration if LFS_STATICCFG is defined, there are defaults
+// for some of these, but some are required. For full documentation, see
+// the lfs_cfg struct above.
+
+// Block device operations
+int lfs_read(lfs_block_t block,
+        lfs_off_t off, void *buffer, lfs_size_t size);
+int lfs_prog(lfs_block_t block,
+        lfs_off_t off, const void *buffer, lfs_size_t size);
+int lfs_erase(lfs_block_t block);
+int lfs_sync(void);
+
+// Required configuration
+#ifndef LFS_READ_SIZE
+#error "LFS_STATICCFG requires LFS_READ_SIZE"
+#endif
+#ifndef LFS_PROG_SIZE
+#error "LFS_STATICCFG requires LFS_PROG_SIZE"
+#endif
+#ifndef LFS_BLOCK_SIZE
+#error "LFS_STATICCFG requires LFS_BLOCK_SIZE"
+#endif
+#ifndef LFS_BLOCK_COUNT
+#error "LFS_STATICCFG requires LFS_BLOCK_COUNT"
+#endif
+#ifndef LFS_BLOCK_CYCLES
+#error "LFS_STATICCFG requires LFS_BLOCK_CYCLES"
+#endif
+#ifndef LFS_CACHE_SIZE
+#error "LFS_STATICCFG requires LFS_CACHE_SIZE"
+#endif
+#ifndef LFS_LOOKAHEAD_SIZE
+#error "LFS_STATICCFG requires LFS_LOOKAHEAD_SIZE"
+#endif
+
+// Optional configuration
+#ifndef LFS_READ_BUFFER
+#define LFS_READ_BUFFER NULL
+#endif
+#ifndef LFS_PROG_BUFFER
+#define LFS_PROG_BUFFER NULL
+#endif
+#ifndef LFS_LOOKAHEAD_BUFFER
+#define LFS_LOOKAHEAD_BUFFER NULL
+#endif
+#endif
+
+#if !defined(LFS_FILE_STATICCFG)
+// Optional configuration provided during lfs_file_opencfg
+struct lfs_file_cfg {
+    // Optional statically allocated file buffer. Must be cache_size.
+    // By default lfs_malloc is used to allocate this buffer.
+    void *buffer;
+
+    // Optional list of custom attributes related to the file. If the file
+    // is opened with read access, these attributes will be read from disk
+    // during the open call. If the file is opened with write access, the
+    // attributes will be written to disk every file sync or close. This
+    // write occurs atomically with update to the file's contents.
+    //
+    // Custom attributes are uniquely identified by an 8-bit type and limited
+    // to LFS_ATTR_MAX bytes. When read, if the stored attribute is smaller
+    // than the buffer, it will be padded with zeros. If the stored attribute
+    // is larger, then it will be silently truncated. If the attribute is not
+    // found, it will be created implicitly.
+    struct lfs_attr *attrs;
+
+    // Number of custom attributes in the list
+    lfs_size_t attr_count;
+};
+#else
+// Static configuration if LFS_FILE_STATICCFG is defined. For full
+// documentation, see the lfs_file_cfg struct above.
+#ifndef LFS_FILE_BUFFER
+#define LFS_FILE_BUFFER NULL
+#endif
+#ifndef LFS_FILE_ATTRS
+#define LFS_FILE_ATTRS ((struct lfs_attr*)NULL)
+#endif
+#ifndef LFS_FILE_ATTR_COUNT
+#define LFS_FILE_ATTR_COUNT 0
+#endif
+#endif
 
 // File info structure
 struct lfs_info {
@@ -293,29 +334,6 @@ struct lfs_attr {
     lfs_size_t size;
 };
 
-// Optional configuration provided during lfs_file_opencfg
-struct lfs_file_config {
-    // Optional statically allocated file buffer. Must be cache_size.
-    // By default lfs_malloc is used to allocate this buffer.
-    void *buffer;
-
-    // Optional list of custom attributes related to the file. If the file
-    // is opened with read access, these attributes will be read from disk
-    // during the open call. If the file is opened with write access, the
-    // attributes will be written to disk every file sync or close. This
-    // write occurs atomically with update to the file's contents.
-    //
-    // Custom attributes are uniquely identified by an 8-bit type and limited
-    // to LFS_ATTR_MAX bytes. When read, if the stored attribute is smaller
-    // than the buffer, it will be padded with zeros. If the stored attribute
-    // is larger, then it will be silently truncated. If the attribute is not
-    // found, it will be created implicitly.
-    struct lfs_attr *attrs;
-
-    // Number of custom attributes in the list
-    lfs_size_t attr_count;
-};
-
 
 /// internal littlefs data structures ///
 typedef struct lfs_cache {
@@ -365,7 +383,9 @@ typedef struct lfs_file {
     lfs_off_t off;
     lfs_cache_t cache;
 
-    const struct lfs_file_config *cfg;
+#ifndef LFS_FILE_STATICCFG
+    struct lfs_file_cfg cfg;
+#endif
 } lfs_file_t;
 
 typedef struct lfs_superblock {
@@ -408,10 +428,9 @@ typedef struct lfs {
         uint32_t *buffer;
     } free;
 
-    const struct lfs_config *cfg;
-    lfs_size_t name_max;
-    lfs_size_t file_max;
-    lfs_size_t attr_max;
+#ifndef LFS_STATICCFG
+    struct lfs_cfg cfg;
+#endif
 
 #ifdef LFS_MIGRATE
     struct lfs1 *lfs1;
@@ -421,18 +440,38 @@ typedef struct lfs {
 
 /// Filesystem functions ///
 
-#ifndef LFS_READONLY
-// Format a block device with the littlefs
+#if defined(LFS_STATICCFG)
+// Format a block device with littlefs
+//
+// Requires a littlefs object. This clobbers the littlefs object, and does
+// not leave the filesystem mounted.
+//
+// Returns a negative error code on failure.
+int lfs_format(lfs_t *lfs);
+#endif
+
+#if !defined(LFS_STATICCFG)
+// Format a block device with littlefs with per-filesystem configuration
 //
 // Requires a littlefs object and config struct. This clobbers the littlefs
 // object, and does not leave the filesystem mounted. The config struct must
 // be zeroed for defaults and backwards compatibility.
 //
 // Returns a negative error code on failure.
-int lfs_format(lfs_t *lfs, const struct lfs_config *config);
+int lfs_formatcfg(lfs_t *lfs, const struct lfs_cfg *config);
 #endif
 
-// Mounts a littlefs
+#if defined(LFS_STATICCFG)
+// Mounts littlefs
+//
+// Requires a littlefs object and static configuration.
+//
+// Returns a negative error code on failure.
+int lfs_mount(lfs_t *lfs);
+#endif
+
+#if !defined(LFS_STATICCFG)
+// Mounts a littlefs with per-filesystem configuration
 //
 // Requires a littlefs object and config struct. Multiple filesystems
 // may be mounted simultaneously with multiple littlefs objects. Both
@@ -440,7 +479,8 @@ int lfs_format(lfs_t *lfs, const struct lfs_config *config);
 // be zeroed for defaults and backwards compatibility.
 //
 // Returns a negative error code on failure.
-int lfs_mount(lfs_t *lfs, const struct lfs_config *config);
+int lfs_mountcfg(lfs_t *lfs, const struct lfs_cfg *config);
+#endif
 
 // Unmounts a littlefs
 //
@@ -450,15 +490,12 @@ int lfs_unmount(lfs_t *lfs);
 
 /// General operations ///
 
-#ifndef LFS_READONLY
 // Removes a file or directory
 //
 // If removing a directory, the directory must be empty.
 // Returns a negative error code on failure.
 int lfs_remove(lfs_t *lfs, const char *path);
-#endif
 
-#ifndef LFS_READONLY
 // Rename or move a file or directory
 //
 // If the destination exists, it must match the source in type.
@@ -466,7 +503,6 @@ int lfs_remove(lfs_t *lfs, const char *path);
 //
 // Returns a negative error code on failure.
 int lfs_rename(lfs_t *lfs, const char *oldpath, const char *newpath);
-#endif
 
 // Find info about a file or directory
 //
@@ -489,7 +525,6 @@ int lfs_stat(lfs_t *lfs, const char *path, struct lfs_info *info);
 lfs_ssize_t lfs_getattr(lfs_t *lfs, const char *path,
         uint8_t type, void *buffer, lfs_size_t size);
 
-#ifndef LFS_READONLY
 // Set custom attributes
 //
 // Custom attributes are uniquely identified by an 8-bit type and limited
@@ -499,16 +534,13 @@ lfs_ssize_t lfs_getattr(lfs_t *lfs, const char *path,
 // Returns a negative error code on failure.
 int lfs_setattr(lfs_t *lfs, const char *path,
         uint8_t type, const void *buffer, lfs_size_t size);
-#endif
 
-#ifndef LFS_READONLY
 // Removes a custom attribute
 //
 // If an attribute is not found, nothing happens.
 //
 // Returns a negative error code on failure.
 int lfs_removeattr(lfs_t *lfs, const char *path, uint8_t type);
-#endif
 
 
 /// File operations ///
@@ -522,7 +554,8 @@ int lfs_removeattr(lfs_t *lfs, const char *path, uint8_t type);
 int lfs_file_open(lfs_t *lfs, lfs_file_t *file,
         const char *path, int flags);
 
-// Open a file with extra configuration
+#if !defined(LFS_FILE_STATICCFG)
+// Open a file with per-file configuration
 //
 // The mode that the file is opened in is determined by the flags, which
 // are values from the enum lfs_open_flags that are bitwise-ored together.
@@ -534,7 +567,8 @@ int lfs_file_open(lfs_t *lfs, lfs_file_t *file,
 // Returns a negative error code on failure.
 int lfs_file_opencfg(lfs_t *lfs, lfs_file_t *file,
         const char *path, int flags,
-        const struct lfs_file_config *config);
+        const struct lfs_file_cfg *config);
+#endif
 
 // Close a file
 //
@@ -557,7 +591,6 @@ int lfs_file_sync(lfs_t *lfs, lfs_file_t *file);
 lfs_ssize_t lfs_file_read(lfs_t *lfs, lfs_file_t *file,
         void *buffer, lfs_size_t size);
 
-#ifndef LFS_READONLY
 // Write data to file
 //
 // Takes a buffer and size indicating the data to write. The file will not
@@ -566,7 +599,6 @@ lfs_ssize_t lfs_file_read(lfs_t *lfs, lfs_file_t *file,
 // Returns the number of bytes written, or a negative error code on failure.
 lfs_ssize_t lfs_file_write(lfs_t *lfs, lfs_file_t *file,
         const void *buffer, lfs_size_t size);
-#endif
 
 // Change the position of the file
 //
@@ -575,12 +607,10 @@ lfs_ssize_t lfs_file_write(lfs_t *lfs, lfs_file_t *file,
 lfs_soff_t lfs_file_seek(lfs_t *lfs, lfs_file_t *file,
         lfs_soff_t off, int whence);
 
-#ifndef LFS_READONLY
 // Truncates the size of the file to the specified size
 //
 // Returns a negative error code on failure.
 int lfs_file_truncate(lfs_t *lfs, lfs_file_t *file, lfs_off_t size);
-#endif
 
 // Return the position of the file
 //
@@ -603,12 +633,10 @@ lfs_soff_t lfs_file_size(lfs_t *lfs, lfs_file_t *file);
 
 /// Directory operations ///
 
-#ifndef LFS_READONLY
 // Create a directory
 //
 // Returns a negative error code on failure.
 int lfs_mkdir(lfs_t *lfs, const char *path);
-#endif
 
 // Open a directory
 //
@@ -670,26 +698,39 @@ lfs_ssize_t lfs_fs_size(lfs_t *lfs);
 // Returns a negative error code on failure.
 int lfs_fs_traverse(lfs_t *lfs, int (*cb)(void*, lfs_block_t), void *data);
 
-#ifndef LFS_READONLY
-#ifdef LFS_MIGRATE
+#if defined(LFS_MIGRATE) && defined(LFS_STATICCFG)
 // Attempts to migrate a previous version of littlefs
 //
 // Behaves similarly to the lfs_format function. Attempts to mount
 // the previous version of littlefs and update the filesystem so it can be
 // mounted with the current version of littlefs.
 //
+// Requires a littlefs object. This clobbers the littlefs object, and does
+// not leave the filesystem mounted.
+//
+// Returns a negative error code on failure.
+int lfs_migrate(lfs_t *lfs, const struct lfs_cfg *cfg);
+#endif
+
+#if defined(LFS_MIGRATE) && !defined(LFS_STATICCFG)
+// Attempts to migrate a previous version of littlefs with per-filesystem
+// configuration
+//
+// Behaves similarly to the lfs_format function. Attempts to mount
+// the previous version of littlefs and update the filesystem so it can be
+// mounted with the current version of littlefs.
+//
 // Requires a littlefs object and config struct. This clobbers the littlefs
 // object, and does not leave the filesystem mounted. The config struct must
 // be zeroed for defaults and backwards compatibility.
 //
 // Returns a negative error code on failure.
-int lfs_migrate(lfs_t *lfs, const struct lfs_config *cfg);
-#endif
+int lfs_migratecfg(lfs_t *lfs, const struct lfs_cfg *cfg);
 #endif
 
 
 #ifdef __cplusplus
-} /* extern "C" */
+}
 #endif
 
 #endif

lfs_util.c

@@ -7,7 +7,7 @@
 #include "lfs_util.h"
 
 // Only compile if user does not provide custom config
-#ifndef LFS_CONFIG
+#ifndef LFS_UTIL
 
 
 // Software CRC implementation with small lookup table

lfs_util.h

@@ -3,20 +3,21 @@
  *
  * Copyright (c) 2017, Arm Limited. All rights reserved.
  * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Can be overridden by users with their own configuration by defining
+ * LFS_UTIL as a header file (-DLFS_UTIL=my_lfs_util.h)
+ *
+ * If LFS_UTIL is defined, none of the default definitions will be
+ * emitted and must be provided by the user's header file. To start, I would
+ * suggest copying lfs_util.h and modifying as needed.
  */
 #ifndef LFS_UTIL_H
 #define LFS_UTIL_H
 
-// Users can override lfs_util.h with their own configuration by defining
-// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
-//
-// If LFS_CONFIG is used, none of the default utils will be emitted and must be
-// provided by the config file. To start, I would suggest copying lfs_util.h
-// and modifying as needed.
-#ifdef LFS_CONFIG
+#ifdef LFS_UTIL
 #define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
 #define LFS_STRINGIZE2(x) #x
-#include LFS_STRINGIZE(LFS_CONFIG)
+#include LFS_STRINGIZE(LFS_UTIL)
 #else
 
 // System includes
@@ -39,17 +40,37 @@
 #endif
 
 #ifdef __cplusplus
-extern "C"
-{
+extern "C" {
 #endif
 
 
+// Possible error codes, these are negative to allow valid positive
+// return values. May be redefined to system-specific error codes as long
+// as they fit in a negative integer.
+enum lfs_error {
+    LFS_ERR_OK          = 0,    // No error
+    LFS_ERR_IO          = -5,   // Error during device operation
+    LFS_ERR_CORRUPT     = -84,  // Corrupted
+    LFS_ERR_NOENT       = -2,   // No directory entry
+    LFS_ERR_EXIST       = -17,  // Entry already exists
+    LFS_ERR_NOTDIR      = -20,  // Entry is not a dir
+    LFS_ERR_ISDIR       = -21,  // Entry is a dir
+    LFS_ERR_NOTEMPTY    = -39,  // Dir is not empty
+    LFS_ERR_BADF        = -9,   // Bad file number
+    LFS_ERR_FBIG        = -27,  // File too large
+    LFS_ERR_INVAL       = -22,  // Invalid parameter
+    LFS_ERR_NOSPC       = -28,  // No space left on device
+    LFS_ERR_NOMEM       = -12,  // No more memory available
+    LFS_ERR_NOATTR      = -61,  // No data/attr available
+    LFS_ERR_NAMETOOLONG = -36,  // File name too long
+};
+
+
 // Macros, may be replaced by system specific wrappers. Arguments to these
 // macros must not have side-effects as the macros can be removed for a smaller
 // code footprint
 
 // Logging functions
-#ifndef LFS_TRACE
 #ifdef LFS_YES_TRACE
 #define LFS_TRACE_(fmt, ...) \
     printf("%s:%d:trace: " fmt "%s\n", __FILE__, __LINE__, __VA_ARGS__)
@@ -57,9 +78,7 @@ extern "C"
 #else
 #define LFS_TRACE(...)
 #endif
-#endif
 
-#ifndef LFS_DEBUG
 #ifndef LFS_NO_DEBUG
 #define LFS_DEBUG_(fmt, ...) \
     printf("%s:%d:debug: " fmt "%s\n", __FILE__, __LINE__, __VA_ARGS__)
@@ -67,9 +86,7 @@ extern "C"
 #else
 #define LFS_DEBUG(...)
 #endif
-#endif
 
-#ifndef LFS_WARN
 #ifndef LFS_NO_WARN
 #define LFS_WARN_(fmt, ...) \
     printf("%s:%d:warn: " fmt "%s\n", __FILE__, __LINE__, __VA_ARGS__)
@@ -77,9 +94,7 @@ extern "C"
 #else
 #define LFS_WARN(...)
 #endif
-#endif
 
-#ifndef LFS_ERROR
 #ifndef LFS_NO_ERROR
 #define LFS_ERROR_(fmt, ...) \
     printf("%s:%d:error: " fmt "%s\n", __FILE__, __LINE__, __VA_ARGS__)
@@ -87,16 +102,13 @@ extern "C"
 #else
 #define LFS_ERROR(...)
 #endif
-#endif
 
 // Runtime assertions
-#ifndef LFS_ASSERT
 #ifndef LFS_NO_ASSERT
 #define LFS_ASSERT(test) assert(test)
 #else
 #define LFS_ASSERT(test)
 #endif
-#endif
 
 
 // Builtin functions, these may be replaced by more efficient
@@ -160,8 +172,8 @@ static inline uint32_t lfs_popc(uint32_t a) {
 
 // Find the sequence comparison of a and b, this is the distance
 // between a and b ignoring overflow
-static inline int lfs_scmp(uint32_t a, uint32_t b) {
-    return (int)(unsigned)(a - b);
+static inline int32_t lfs_scmp(uint32_t a, uint32_t b) {
+    return (int32_t)(uint32_t)(a - b);
 }
 
 // Convert between 32-bit little-endian and native order
@@ -237,7 +249,7 @@ static inline void lfs_free(void *p) {
 
 
 #ifdef __cplusplus
-} /* extern "C" */
+}
 #endif
 
 #endif

scripts/code.py

@@ -1,214 +0,0 @@
-#!/usr/bin/env python3
-#
-# Script to find code size at the function level. Basically just a bit wrapper
-# around nm with some extra conveniences for comparing builds. Heavily inspired
-# by Linux's Bloat-O-Meter.
-#
-
-import os
-import glob
-import itertools as it
-import subprocess as sp
-import shlex
-import re
-import csv
-import collections as co
-
-
-OBJ_PATHS = ['*.o', 'bd/*.o']
-
-def collect(paths, **args):
-    results = co.defaultdict(lambda: 0)
-    pattern = re.compile(
-        '^(?P<size>[0-9a-fA-F]+)' +
-        ' (?P<type>[%s])' % re.escape(args['type']) +
-        ' (?P<func>.+?)$')
-    for path in paths:
-        # note nm-tool may contain extra args
-        cmd = args['nm_tool'] + ['--size-sort', path]
-        if args.get('verbose'):
-            print(' '.join(shlex.quote(c) for c in cmd))
-        proc = sp.Popen(cmd,
-            stdout=sp.PIPE,
-            stderr=sp.PIPE if not args.get('verbose') else None,
-            universal_newlines=True)
-        for line in proc.stdout:
-            m = pattern.match(line)
-            if m:
-                results[(path, m.group('func'))] += int(m.group('size'), 16)
-        proc.wait()
-        if proc.returncode != 0:
-            if not args.get('verbose'):
-                for line in proc.stderr:
-                    sys.stdout.write(line)
-            sys.exit(-1)
-
-    flat_results = []
-    for (file, func), size in results.items():
-        # map to source files
-        if args.get('build_dir'):
-            file = re.sub('%s/*' % re.escape(args['build_dir']), '', file)
-        # discard internal functions
-        if func.startswith('__'):
-            continue
-        # discard .8449 suffixes created by optimizer
-        func = re.sub('\.[0-9]+', '', func)
-        flat_results.append((file, func, size))
-
-    return flat_results
-
-def main(**args):
-    # find sizes
-    if not args.get('use', None):
-        # find .o files
-        paths = []
-        for path in args['obj_paths']:
-            if os.path.isdir(path):
-                path = path + '/*.o'
-
-            for path in glob.glob(path):
-                paths.append(path)
-
-        if not paths:
-            print('no .obj files found in %r?' % args['obj_paths'])
-            sys.exit(-1)
-
-        results = collect(paths, **args)
-    else:
-        with open(args['use']) as f:
-            r = csv.DictReader(f)
-            results = [
-                (   result['file'],
-                    result['function'],
-                    int(result['size']))
-                for result in r]
-
-    total = 0
-    for _, _, size in results:
-        total += size
-
-    # find previous results?
-    if args.get('diff'):
-        with open(args['diff']) as f:
-            r = csv.DictReader(f)
-            prev_results = [
-                (   result['file'],
-                    result['function'],
-                    int(result['size']))
-                for result in r]
-
-        prev_total = 0
-        for _, _, size in prev_results:
-            prev_total += size
-
-    # write results to CSV
-    if args.get('output'):
-        with open(args['output'], 'w') as f:
-            w = csv.writer(f)
-            w.writerow(['file', 'function', 'size'])
-            for file, func, size in sorted(results):
-                w.writerow((file, func, size))
-
-    # print results
-    def dedup_entries(results, by='function'):
-        entries = co.defaultdict(lambda: 0)
-        for file, func, size in results:
-            entry = (file if by == 'file' else func)
-            entries[entry] += size
-        return entries
-
-    def diff_entries(olds, news):
-        diff = co.defaultdict(lambda: (0, 0, 0, 0))
-        for name, new in news.items():
-            diff[name] = (0, new, new, 1.0)
-        for name, old in olds.items():
-            _, new, _, _ = diff[name]
-            diff[name] = (old, new, new-old, (new-old)/old if old else 1.0)
-        return diff
-
-    def print_header(by=''):
-        if not args.get('diff'):
-            print('%-36s %7s' % (by, 'size'))
-        else:
-            print('%-36s %7s %7s %7s' % (by, 'old', 'new', 'diff'))
-
-    def print_entries(by='function'):
-        entries = dedup_entries(results, by=by)
-
-        if not args.get('diff'):
-            print_header(by=by)
-            for name, size in sorted(entries.items()):
-                print("%-36s %7d" % (name, size))
-        else:
-            prev_entries = dedup_entries(prev_results, by=by)
-            diff = diff_entries(prev_entries, entries)
-            print_header(by='%s (%d added, %d removed)' % (by,
-                sum(1 for old, _, _, _ in diff.values() if not old),
-                sum(1 for _, new, _, _ in diff.values() if not new)))
-            for name, (old, new, diff, ratio) in sorted(diff.items(),
-                    key=lambda x: (-x[1][3], x)):
-                if ratio or args.get('all'):
-                    print("%-36s %7s %7s %+7d%s" % (name,
-                        old or "-",
-                        new or "-",
-                        diff,
-                        ' (%+.1f%%)' % (100*ratio) if ratio else ''))
-
-    def print_totals():
-        if not args.get('diff'):
-            print("%-36s %7d" % ('TOTAL', total))
-        else:
-            ratio = (total-prev_total)/prev_total if prev_total else 1.0
-            print("%-36s %7s %7s %+7d%s" % (
-                'TOTAL',
-                prev_total if prev_total else '-',
-                total if total else '-',
-                total-prev_total,
-                ' (%+.1f%%)' % (100*ratio) if ratio else ''))
-
-    if args.get('quiet'):
-        pass
-    elif args.get('summary'):
-        print_header()
-        print_totals()
-    elif args.get('files'):
-        print_entries(by='file')
-        print_totals()
-    else:
-        print_entries(by='function')
-        print_totals()
-
-if __name__ == "__main__":
-    import argparse
-    import sys
-    parser = argparse.ArgumentParser(
-        description="Find code size at the function level.")
-    parser.add_argument('obj_paths', nargs='*', default=OBJ_PATHS,
-        help="Description of where to find *.o files. May be a directory \
-            or a list of paths. Defaults to %r." % OBJ_PATHS)
-    parser.add_argument('-v', '--verbose', action='store_true',
-        help="Output commands that run behind the scenes.")
-    parser.add_argument('-o', '--output',
-        help="Specify CSV file to store results.")
-    parser.add_argument('-u', '--use',
-        help="Don't compile and find code sizes, instead use this CSV file.")
-    parser.add_argument('-d', '--diff',
-        help="Specify CSV file to diff code size against.")
-    parser.add_argument('-a', '--all', action='store_true',
-        help="Show all functions, not just the ones that changed.")
-    parser.add_argument('--files', action='store_true',
-        help="Show file-level code sizes. Note this does not include padding! "
-            "So sizes may differ from other tools.")
-    parser.add_argument('-s', '--summary', action='store_true',
-        help="Only show the total code size.")
-    parser.add_argument('-q', '--quiet', action='store_true',
-        help="Don't show anything, useful with -o.")
-    parser.add_argument('--type', default='tTrRdDbB',
-        help="Type of symbols to report, this uses the same single-character "
-            "type-names emitted by nm. Defaults to %(default)r.")
-    parser.add_argument('--nm-tool', default=['nm'], type=lambda x: x.split(),
-        help="Path to the nm tool to use.")
-    parser.add_argument('--build-dir',
-        help="Specify the relative build directory. Used to map object files \
-            to the correct source files.")
-    sys.exit(main(**vars(parser.parse_args())))

scripts/coverage.py

@@ -1,254 +0,0 @@
-#!/usr/bin/env python3
-#
-# Parse and report coverage info from .info files generated by lcov
-#
-import os
-import glob
-import csv
-import re
-import collections as co
-import bisect as b
-
-
-INFO_PATHS = ['tests/*.toml.info']
-
-def collect(paths, **args):
-    file = None
-    funcs = []
-    lines = co.defaultdict(lambda: 0)
-    pattern = re.compile(
-        '^(?P<file>SF:/?(?P<file_name>.*))$'
-        '|^(?P<func>FN:(?P<func_lineno>[0-9]*),(?P<func_name>.*))$'
-        '|^(?P<line>DA:(?P<line_lineno>[0-9]*),(?P<line_hits>[0-9]*))$')
-    for path in paths:
-        with open(path) as f:
-            for line in f:
-                m = pattern.match(line)
-                if m and m.group('file'):
-                    file = m.group('file_name')
-                elif m and file and m.group('func'):
-                    funcs.append((file, int(m.group('func_lineno')),
-                        m.group('func_name')))
-                elif m and file and m.group('line'):
-                    lines[(file, int(m.group('line_lineno')))] += (
-                        int(m.group('line_hits')))
-
-    # map line numbers to functions
-    funcs.sort()
-    def func_from_lineno(file, lineno):
-        i = b.bisect(funcs, (file, lineno))
-        if i and funcs[i-1][0] == file:
-            return funcs[i-1][2]
-        else:
-            return None
-
-    # reduce to function info
-    reduced_funcs = co.defaultdict(lambda: (0, 0))
-    for (file, line_lineno), line_hits in lines.items():
-        func = func_from_lineno(file, line_lineno)
-        if not func:
-            continue
-        hits, count = reduced_funcs[(file, func)]
-        reduced_funcs[(file, func)] = (hits + (line_hits > 0), count + 1)
-
-    results = []
-    for (file, func), (hits, count) in reduced_funcs.items():
-        # discard internal/testing functions (test_* injected with
-        # internal testing)
-        if func.startswith('__') or func.startswith('test_'):
-            continue
-        # discard .8449 suffixes created by optimizer
-        func = re.sub('\.[0-9]+', '', func)
-        results.append((file, func, hits, count))
-
-    return results
-
-
-def main(**args):
-    # find coverage
-    if not args.get('use'):
-        # find *.info files
-        paths = []
-        for path in args['info_paths']:
-            if os.path.isdir(path):
-                path = path + '/*.gcov'
-
-            for path in glob.glob(path):
-                paths.append(path)
-
-        if not paths:
-            print('no .info files found in %r?' % args['info_paths'])
-            sys.exit(-1)
-
-        results = collect(paths, **args)
-    else:
-        with open(args['use']) as f:
-            r = csv.DictReader(f)
-            results = [
-                (   result['file'],
-                    result['function'],
-                    int(result['hits']),
-                    int(result['count']))
-                for result in r]
-
-    total_hits, total_count = 0, 0
-    for _, _, hits, count in results:
-        total_hits += hits
-        total_count += count
-
-    # find previous results?
-    if args.get('diff'):
-        with open(args['diff']) as f:
-            r = csv.DictReader(f)
-            prev_results = [
-                (   result['file'],
-                    result['function'],
-                    int(result['hits']),
-                    int(result['count']))
-                for result in r]
-
-        prev_total_hits, prev_total_count = 0, 0
-        for _, _, hits, count in prev_results:
-            prev_total_hits += hits
-            prev_total_count += count
-
-    # write results to CSV
-    if args.get('output'):
-        with open(args['output'], 'w') as f:
-            w = csv.writer(f)
-            w.writerow(['file', 'function', 'hits', 'count'])
-            for file, func, hits, count in sorted(results):
-                w.writerow((file, func, hits, count))
-
-    # print results
-    def dedup_entries(results, by='function'):
-        entries = co.defaultdict(lambda: (0, 0))
-        for file, func, hits, count in results:
-            entry = (file if by == 'file' else func)
-            entry_hits, entry_count = entries[entry]
-            entries[entry] = (entry_hits + hits, entry_count + count)
-        return entries
-
-    def diff_entries(olds, news):
-        diff = co.defaultdict(lambda: (0, 0, 0, 0, 0, 0, 0))
-        for name, (new_hits, new_count) in news.items():
-            diff[name] = (
-                0, 0,
-                new_hits, new_count,
-                new_hits, new_count,
-                (new_hits/new_count if new_count else 1.0) - 1.0)
-        for name, (old_hits, old_count) in olds.items():
-            _, _, new_hits, new_count, _, _, _ = diff[name]
-            diff[name] = (
-                old_hits, old_count,
-                new_hits, new_count,
-                new_hits-old_hits, new_count-old_count,
-                ((new_hits/new_count if new_count else 1.0)
-                    - (old_hits/old_count if old_count else 1.0)))
-        return diff
-
-    def print_header(by=''):
-        if not args.get('diff'):
-            print('%-36s %19s' % (by, 'hits/line'))
-        else:
-            print('%-36s %19s %19s %11s' % (by, 'old', 'new', 'diff'))
-
-    def print_entries(by='function'):
-        entries = dedup_entries(results, by=by)
-
-        if not args.get('diff'):
-            print_header(by=by)
-            for name, (hits, count) in sorted(entries.items()):
-                print("%-36s %11s %7s" % (name,
-                    '%d/%d' % (hits, count)
-                        if count else '-',
-                    '%.1f%%' % (100*hits/count)
-                        if count else '-'))
-        else:
-            prev_entries = dedup_entries(prev_results, by=by)
-            diff = diff_entries(prev_entries, entries)
-            print_header(by='%s (%d added, %d removed)' % (by,
-                sum(1 for _, old, _, _, _, _, _ in diff.values() if not old),
-                sum(1 for _, _, _, new, _, _, _ in diff.values() if not new)))
-            for name, (
-                    old_hits, old_count,
-                    new_hits, new_count,
-                    diff_hits, diff_count, ratio) in sorted(diff.items(),
-                        key=lambda x: (-x[1][6], x)):
-                if ratio or args.get('all'):
-                    print("%-36s %11s %7s %11s %7s %11s%s" % (name,
-                        '%d/%d' % (old_hits, old_count)
-                            if old_count else '-',
-                        '%.1f%%' % (100*old_hits/old_count)
-                            if old_count else '-',
-                        '%d/%d' % (new_hits, new_count)
-                            if new_count else '-',
-                        '%.1f%%' % (100*new_hits/new_count)
-                            if new_count else '-',
-                        '%+d/%+d' % (diff_hits, diff_count),
-                        ' (%+.1f%%)' % (100*ratio) if ratio else ''))
-
-    def print_totals():
-        if not args.get('diff'):
-            print("%-36s %11s %7s" % ('TOTAL',
-                '%d/%d' % (total_hits, total_count)
-                    if total_count else '-',
-                '%.1f%%' % (100*total_hits/total_count)
-                    if total_count else '-'))
-        else:
-            ratio = ((total_hits/total_count
-                    if total_count else 1.0)
-                - (prev_total_hits/prev_total_count
-                    if prev_total_count else 1.0))
-            print("%-36s %11s %7s %11s %7s %11s%s" % ('TOTAL',
-                '%d/%d' % (prev_total_hits, prev_total_count)
-                    if prev_total_count else '-',
-                '%.1f%%' % (100*prev_total_hits/prev_total_count)
-                    if prev_total_count else '-',
-                '%d/%d' % (total_hits, total_count)
-                    if total_count else '-',
-                '%.1f%%' % (100*total_hits/total_count)
-                    if total_count else '-',
-                '%+d/%+d' % (total_hits-prev_total_hits,
-                    total_count-prev_total_count),
-                ' (%+.1f%%)' % (100*ratio) if ratio else ''))
-
-    if args.get('quiet'):
-        pass
-    elif args.get('summary'):
-        print_header()
-        print_totals()
-    elif args.get('files'):
-        print_entries(by='file')
-        print_totals()
-    else:
-        print_entries(by='function')
-        print_totals()
-
-if __name__ == "__main__":
-    import argparse
-    import sys
-    parser = argparse.ArgumentParser(
-        description="Parse and report coverage info from .info files \
-            generated by lcov")
-    parser.add_argument('info_paths', nargs='*', default=INFO_PATHS,
-        help="Description of where to find *.info files. May be a directory \
-            or list of paths. *.info files will be merged to show the total \
-            coverage. Defaults to %r." % INFO_PATHS)
-    parser.add_argument('-v', '--verbose', action='store_true',
-        help="Output commands that run behind the scenes.")
-    parser.add_argument('-o', '--output',
-        help="Specify CSV file to store results.")
-    parser.add_argument('-u', '--use',
-        help="Don't do any work, instead use this CSV file.")
-    parser.add_argument('-d', '--diff',
-        help="Specify CSV file to diff code size against.")
-    parser.add_argument('-a', '--all', action='store_true',
-        help="Show all functions, not just the ones that changed.")
-    parser.add_argument('--files', action='store_true',
-        help="Show file-level coverage.")
-    parser.add_argument('-s', '--summary', action='store_true',
-        help="Only show the total coverage.")
-    parser.add_argument('-q', '--quiet', action='store_true',
-        help="Don't show anything, useful with -o.")
-    sys.exit(main(**vars(parser.parse_args())))

scripts/readtree.py

@@ -106,7 +106,7 @@ def main(args):
             struct.unpack('<HH', superblock[1].data[0:4].ljust(4, b'\xff'))))
     print("%-47s%s" % ("littlefs v%s.%s" % version,
         "data (truncated, if it fits)"
-        if not any([args.no_truncate, args.log, args.all]) else ""))
+        if not any([args.no_truncate, args.tags, args.log, args.all]) else ""))
 
     # print gstate
     print("gstate 0x%s" % ''.join('%02x' % c for c in gstate))

scripts/test.py

@@ -20,58 +20,57 @@ import pty
 import errno
 import signal
 
-TEST_PATHS = 'tests'
+TESTDIR = 'tests'
 RULES = """
-# add block devices to sources
-TESTSRC ?= $(SRC) $(wildcard bd/*.c)
-
 define FLATTEN
-%(path)s%%$(subst /,.,$(target)): $(target)
+tests/%$(subst /,.,$(target)): $(target)
     ./scripts/explode_asserts.py $$< -o $$@
 endef
-$(foreach target,$(TESTSRC),$(eval $(FLATTEN)))
+$(foreach target,$(SRC),$(eval $(FLATTEN)))
+
+-include tests/*.d
 
--include %(path)s*.d
 .SECONDARY:
-
-%(path)s.test: %(path)s.test.o \\
-        $(foreach t,$(subst /,.,$(TESTSRC:.c=.o)),%(path)s.$t)
+%.test: %.test.o $(foreach f,$(subst /,.,$(SRC:.c=.o)),%.$f)
     $(CC) $(CFLAGS) $^ $(LFLAGS) -o $@
-
-# needed in case builddir is different
-%(path)s%%.o: %(path)s%%.c
-    $(CC) -c -MMD $(CFLAGS) $< -o $@
 """
-COVERAGE_RULES = """
-%(path)s.test: override CFLAGS += -fprofile-arcs -ftest-coverage
+BEFORE_MAIN = """
+const char *lfs_testbd_path;
+uint32_t lfs_testbd_cycles;
 
-# delete lingering coverage
-%(path)s.test: | %(path)s.info.clean
-.PHONY: %(path)s.info.clean
-%(path)s.info.clean:
-    rm -f %(path)s*.gcda
+int lfs_testbd_readctx(void *ctx, lfs_block_t block,
+        lfs_off_t off, void *buffer, lfs_size_t size) {
+    return lfs_testbd_read((lfs_testbd_t*)ctx, block, off, buffer, size);
+}
 
-# accumulate coverage info
-.PHONY: %(path)s.info
-%(path)s.info:
-    $(strip $(LCOV) -c \\
-        $(addprefix -d ,$(wildcard %(path)s*.gcda)) \\
-        --rc 'geninfo_adjust_src_path=$(shell pwd)' \\
-        -o $@)
-    $(LCOV) -e $@ $(addprefix /,$(SRC)) -o $@
-ifdef COVERAGETARGET
-    $(strip $(LCOV) -a $@ \\
-        $(addprefix -a ,$(wildcard $(COVERAGETARGET))) \\
-        -o $(COVERAGETARGET))
-endif
+int lfs_testbd_progctx(void *ctx, lfs_block_t block,
+        lfs_off_t off, const void *buffer, lfs_size_t size) {
+    return lfs_testbd_prog((lfs_testbd_t*)ctx, block, off, buffer, size);
+}
+
+int lfs_testbd_erasectx(void *ctx, lfs_block_t block) {
+    return lfs_testbd_erase((lfs_testbd_t*)ctx, block);
+}
+
+int lfs_testbd_syncctx(void *ctx) {
+    return lfs_testbd_sync((lfs_testbd_t*)ctx);
+}
 """
-GLOBALS = """
+BEFORE_TESTS = """
 //////////////// AUTOGENERATED TEST ////////////////
 #include "lfs.h"
 #include "bd/lfs_testbd.h"
 #include <stdio.h>
+
 extern const char *lfs_testbd_path;
 extern uint32_t lfs_testbd_cycles;
+
+extern int lfs_testbd_readctx(void *ctx, lfs_block_t block,
+        lfs_off_t off, void *buffer, lfs_size_t size);
+extern int lfs_testbd_progctx(void *ctx, lfs_block_t block,
+        lfs_off_t off, const void *buffer, lfs_size_t size);
+extern int lfs_testbd_erasectx(void *ctx, lfs_block_t block);
+extern int lfs_testbd_syncctx(void *ctx);
 """
 DEFINES = {
     'LFS_READ_SIZE': 16,
@@ -97,12 +96,12 @@ PROLOGUE = """
     __attribute__((unused)) lfs_size_t size;
     __attribute__((unused)) int err;
     
-    __attribute__((unused)) const struct lfs_config cfg = {
-        .context        = &bd,
-        .read           = lfs_testbd_read,
-        .prog           = lfs_testbd_prog,
-        .erase          = lfs_testbd_erase,
-        .sync           = lfs_testbd_sync,
+    __attribute__((unused)) const struct lfs_cfg cfg = {
+        .ctx            = &bd,
+        .read           = lfs_testbd_readctx,
+        .prog           = lfs_testbd_progctx,
+        .erase          = lfs_testbd_erasectx,
+        .sync           = lfs_testbd_syncctx,
         .read_size      = LFS_READ_SIZE,
         .prog_size      = LFS_PROG_SIZE,
         .block_size     = LFS_BLOCK_SIZE,
@@ -112,18 +111,22 @@ PROLOGUE = """
         .lookahead_size = LFS_LOOKAHEAD_SIZE,
     };
 
-    __attribute__((unused)) const struct lfs_testbd_config bdcfg = {
+    __attribute__((unused)) const struct lfs_testbd_cfg bdcfg = {
+        .read_size          = LFS_READ_SIZE,
+        .prog_size          = LFS_PROG_SIZE,
+        .erase_size         = LFS_BLOCK_SIZE,
+        .erase_count        = LFS_BLOCK_COUNT,
         .erase_value        = LFS_ERASE_VALUE,
         .erase_cycles       = LFS_ERASE_CYCLES,
         .badblock_behavior  = LFS_BADBLOCK_BEHAVIOR,
         .power_cycles       = lfs_testbd_cycles,
     };
 
-    lfs_testbd_createcfg(&cfg, lfs_testbd_path, &bdcfg) => 0;
+    lfs_testbd_createcfg(&bd, lfs_testbd_path, &bdcfg) => 0;
 """
 EPILOGUE = """
     // epilogue
-    lfs_testbd_destroy(&cfg) => 0;
+    lfs_testbd_destroy(&bd) => 0;
 """
 PASS = '\033[32m✓\033[0m'
 FAIL = '\033[31m✗\033[0m'
@@ -150,8 +153,6 @@ class TestCase:
         self.if_ = config.get('if', None)
         self.in_ = config.get('in', None)
 
-        self.result = None
-
     def __str__(self):
         if hasattr(self, 'permno'):
             if any(k not in self.case.defines for k in self.defines):
@@ -212,7 +213,7 @@ class TestCase:
                 len(self.filter) >= 2 and
                 self.filter[1] != self.permno):
             return False
-        elif args.get('no_internal') and self.in_ is not None:
+        elif args.get('no_internal', False) and self.in_ is not None:
             return False
         elif self.if_ is not None:
             if_ = self.if_
@@ -246,7 +247,7 @@ class TestCase:
                 try:
                     with open(disk, 'w') as f:
                         f.truncate(0)
-                    if args.get('verbose'):
+                    if args.get('verbose', False):
                         print('truncate --size=0', disk)
                 except FileNotFoundError:
                     pass
@@ -270,14 +271,14 @@ class TestCase:
                     '-ex', 'r'])
             ncmd.extend(['--args'] + cmd)
 
-            if args.get('verbose'):
+            if args.get('verbose', False):
                 print(' '.join(shlex.quote(c) for c in ncmd))
             signal.signal(signal.SIGINT, signal.SIG_IGN)
             sys.exit(sp.call(ncmd))
 
         # run test case!
         mpty, spty = pty.openpty()
-        if args.get('verbose'):
+        if args.get('verbose', False):
             print(' '.join(shlex.quote(c) for c in cmd))
         proc = sp.Popen(cmd, stdout=spty, stderr=spty)
         os.close(spty)
@@ -292,10 +293,8 @@ class TestCase:
                     if e.errno == errno.EIO:
                         break
                     raise
-                if not line:
-                    break;
                 stdout.append(line)
-                if args.get('verbose'):
+                if args.get('verbose', False):
                     sys.stdout.write(line)
                 # intercept asserts
                 m = re.match(
@@ -334,7 +333,7 @@ class ValgrindTestCase(TestCase):
         return not self.leaky and super().shouldtest(**args)
 
     def test(self, exec=[], **args):
-        verbose = args.get('verbose')
+        verbose = args.get('verbose', False)
         uninit = (self.defines.get('LFS_ERASE_VALUE', None) == -1)
         exec = [
             'valgrind',
@@ -386,17 +385,12 @@ class TestSuite:
         self.name = os.path.basename(path)
         if self.name.endswith('.toml'):
             self.name = self.name[:-len('.toml')]
-        if args.get('build_dir'):
-            self.toml = path
-            self.path = args['build_dir'] + '/' + path
-        else:
-            self.toml = path
-            self.path = path
+        self.path = path
         self.classes = classes
         self.defines = defines.copy()
         self.filter = filter
 
-        with open(self.toml) as f:
+        with open(path) as f:
             # load tests
             config = toml.load(f)
 
@@ -507,8 +501,8 @@ class TestSuite:
 
     def build(self, **args):
         # build test files
-        tf = open(self.path + '.test.tc', 'w')
-        tf.write(GLOBALS)
+        tf = open(self.path + '.test.c.t', 'w')
+        tf.write(BEFORE_TESTS)
         if self.code is not None:
             tf.write('#line %d "%s"\n' % (self.code_lineno, self.path))
             tf.write(self.code)
@@ -517,20 +511,19 @@ class TestSuite:
         for case in self.cases:
             if case.in_ not in tfs:
                 tfs[case.in_] = open(self.path+'.'+
-                    re.sub('(\.c)?$', '.tc', case.in_.replace('/', '.')), 'w')
+                    case.in_.replace('/', '.')+'.t', 'w')
                 tfs[case.in_].write('#line 1 "%s"\n' % case.in_)
                 with open(case.in_) as f:
                     for line in f:
                         tfs[case.in_].write(line)
                 tfs[case.in_].write('\n')
-                tfs[case.in_].write(GLOBALS)
+                tfs[case.in_].write(BEFORE_TESTS)
 
             tfs[case.in_].write('\n')
             case.build(tfs[case.in_], **args)
 
+        tf.write(BEFORE_MAIN)
         tf.write('\n')
-        tf.write('const char *lfs_testbd_path;\n')
-        tf.write('uint32_t lfs_testbd_cycles;\n')
         tf.write('int main(int argc, char **argv) {\n')
         tf.write(4*' '+'int case_         = (argc > 1) ? atoi(argv[1]) : 0;\n')
         tf.write(4*' '+'int perm          = (argc > 2) ? atoi(argv[2]) : 0;\n')
@@ -556,33 +549,25 @@ class TestSuite:
 
         # write makefiles
         with open(self.path + '.mk', 'w') as mk:
-            mk.write(RULES.replace(4*' ', '\t') % dict(path=self.path))
+            mk.write(RULES.replace(4*' ', '\t'))
             mk.write('\n')
 
-            # add coverage hooks?
-            if args.get('coverage'):
-                mk.write(COVERAGE_RULES.replace(4*' ', '\t') % dict(
-                    path=self.path))
-                mk.write('\n')
-
             # add truely global defines globally
             for k, v in sorted(self.defines.items()):
-                mk.write('%s.test: override CFLAGS += -D%s=%r\n'
-                    % (self.path, k, v))
+                mk.write('%s: override CFLAGS += -D%s=%r\n' % (
+                    self.path+'.test', k, v))
 
             for path in tfs:
                 if path is None:
                     mk.write('%s: %s | %s\n' % (
                         self.path+'.test.c',
-                        self.toml,
-                        self.path+'.test.tc'))
+                        self.path,
+                        self.path+'.test.c.t'))
                 else:
                     mk.write('%s: %s %s | %s\n' % (
                         self.path+'.'+path.replace('/', '.'),
-                        self.toml,
-                        path,
-                        self.path+'.'+re.sub('(\.c)?$', '.tc',
-                            path.replace('/', '.'))))
+                        self.path, path,
+                        self.path+'.'+path.replace('/', '.')+'.t'))
                 mk.write('\t./scripts/explode_asserts.py $| -o $@\n')
 
         self.makefile = self.path + '.mk'
@@ -605,7 +590,7 @@ class TestSuite:
                 if not args.get('verbose', True):
                     sys.stdout.write(FAIL)
                     sys.stdout.flush()
-                if not args.get('keep_going'):
+                if not args.get('keep_going', False):
                     if not args.get('verbose', True):
                         sys.stdout.write('\n')
                     raise
@@ -627,30 +612,30 @@ def main(**args):
 
     # and what class of TestCase to run
     classes = []
-    if args.get('normal'):
+    if args.get('normal', False):
         classes.append(TestCase)
-    if args.get('reentrant'):
+    if args.get('reentrant', False):
         classes.append(ReentrantTestCase)
-    if args.get('valgrind'):
+    if args.get('valgrind', False):
         classes.append(ValgrindTestCase)
     if not classes:
         classes = [TestCase]
 
     suites = []
-    for testpath in args['test_paths']:
+    for testpath in args['testpaths']:
         # optionally specified test case/perm
         testpath, *filter = testpath.split('#')
         filter = [int(f) for f in filter]
 
         # figure out the suite's toml file
         if os.path.isdir(testpath):
-            testpath = testpath + '/*.toml'
+            testpath = testpath + '/test_*.toml'
         elif os.path.isfile(testpath):
             testpath = testpath
         elif testpath.endswith('.toml'):
-            testpath = TEST_PATHS + '/' + testpath
+            testpath = TESTDIR + '/' + testpath
         else:
-            testpath = TEST_PATHS + '/' + testpath + '.toml'
+            testpath = TESTDIR + '/' + testpath + '.toml'
 
         # find tests
         for path in glob.glob(testpath):
@@ -676,7 +661,7 @@ def main(**args):
         list(it.chain.from_iterable(['-f', m] for m in makefiles)) +
         [target for target in targets])
     mpty, spty = pty.openpty()
-    if args.get('verbose'):
+    if args.get('verbose', False):
         print(' '.join(shlex.quote(c) for c in cmd))
     proc = sp.Popen(cmd, stdout=spty, stderr=spty)
     os.close(spty)
@@ -689,17 +674,15 @@ def main(**args):
             if e.errno == errno.EIO:
                 break
             raise
-        if not line:
-            break;
         stdout.append(line)
-        if args.get('verbose'):
+        if args.get('verbose', False):
             sys.stdout.write(line)
         # intercept warnings
         m = re.match(
             '^{0}([^:]+):(\d+):(?:\d+:)?{0}{1}:{0}(.*)$'
             .format('(?:\033\[[\d;]*.| )*', 'warning'),
             line)
-        if m and not args.get('verbose'):
+        if m and not args.get('verbose', False):
             try:
                 with open(m.group(1)) as f:
                     lineno = int(m.group(2))
@@ -712,26 +695,27 @@ def main(**args):
             except:
                 pass
     proc.wait()
+
     if proc.returncode != 0:
-        if not args.get('verbose'):
+        if not args.get('verbose', False):
             for line in stdout:
                 sys.stdout.write(line)
-        sys.exit(-1)
+        sys.exit(-3)
 
     print('built %d test suites, %d test cases, %d permutations' % (
         len(suites),
         sum(len(suite.cases) for suite in suites),
         sum(len(suite.perms) for suite in suites)))
 
-    total = 0
+    filtered = 0
     for suite in suites:
         for perm in suite.perms:
-            total += perm.shouldtest(**args)
-    if total != sum(len(suite.perms) for suite in suites):
-        print('filtered down to %d permutations' % total)
+            filtered += perm.shouldtest(**args)
+    if filtered != sum(len(suite.perms) for suite in suites):
+        print('filtered down to %d permutations' % filtered)
 
     # only requested to build?
-    if args.get('build'):
+    if args.get('build', False):
         return 0
 
     print('====== testing ======')
@@ -746,12 +730,15 @@ def main(**args):
     failed = 0
     for suite in suites:
         for perm in suite.perms:
+            if not hasattr(perm, 'result'):
+                continue
+
             if perm.result == PASS:
                 passed += 1
-            elif isinstance(perm.result, TestFailure):
+            else:
                 sys.stdout.write(
                     "\033[01m{path}:{lineno}:\033[01;31mfailure:\033[m "
-                    "{perm} failed\n".format(
+                    "{perm} failed with {returncode}\n".format(
                         perm=perm, path=perm.suite.path, lineno=perm.lineno,
                         returncode=perm.result.returncode or 0))
                 if perm.result.stdout:
@@ -769,33 +756,11 @@ def main(**args):
                 sys.stdout.write('\n')
                 failed += 1
 
-    if args.get('coverage'):
-        # collect coverage info
-        # why -j1? lcov doesn't work in parallel because of gcov limitations
-        cmd = (['make', '-j1', '-f', 'Makefile'] +
-            list(it.chain.from_iterable(['-f', m] for m in makefiles)) +
-            (['COVERAGETARGET=%s' % args['coverage']]
-                if isinstance(args['coverage'], str) else []) +
-            [suite.path + '.info' for suite in suites
-                if any(perm.result == PASS for perm in suite.perms)])
-        if args.get('verbose'):
-            print(' '.join(shlex.quote(c) for c in cmd))
-        proc = sp.Popen(cmd,
-            stdout=sp.PIPE if not args.get('verbose') else None,
-            stderr=sp.STDOUT if not args.get('verbose') else None,
-            universal_newlines=True)
-        proc.wait()
-        if proc.returncode != 0:
-            if not args.get('verbose'):
-                for line in proc.stdout:
-                    sys.stdout.write(line)
-            sys.exit(-1)
-
-    if args.get('gdb'):
+    if args.get('gdb', False):
         failure = None
         for suite in suites:
             for perm in suite.perms:
-                if isinstance(perm.result, TestFailure):
+                if getattr(perm, 'result', PASS) != PASS:
                     failure = perm.result
         if failure is not None:
             print('======= gdb ======')
@@ -803,22 +768,20 @@ def main(**args):
             failure.case.test(failure=failure, **args)
             sys.exit(0)
 
-    print('tests passed %d/%d (%.2f%%)' % (passed, total,
-        100*(passed/total if total else 1.0)))
-    print('tests failed %d/%d (%.2f%%)' % (failed, total,
-        100*(failed/total if total else 1.0)))
+    print('tests passed: %d' % passed)
+    print('tests failed: %d' % failed)
     return 1 if failed > 0 else 0
 
 if __name__ == "__main__":
     import argparse
     parser = argparse.ArgumentParser(
         description="Run parameterized tests in various configurations.")
-    parser.add_argument('test_paths', nargs='*', default=[TEST_PATHS],
+    parser.add_argument('testpaths', nargs='*', default=[TESTDIR],
         help="Description of test(s) to run. By default, this is all tests \
             found in the \"{0}\" directory. Here, you can specify a different \
-            directory of tests, a specific file, a suite by name, and even \
-            specific test cases and permutations. For example \
-            \"test_dirs#1\" or \"{0}/test_dirs.toml#1#1\".".format(TEST_PATHS))
+            directory of tests, a specific file, a suite by name, and even a \
+            specific test case by adding brackets. For example \
+            \"test_dirs[0]\" or \"{0}/test_dirs.toml[0]\".".format(TESTDIR))
     parser.add_argument('-D', action='append', default=[],
         help="Overriding parameter definitions.")
     parser.add_argument('-v', '--verbose', action='store_true',
@@ -839,19 +802,10 @@ if __name__ == "__main__":
         help="Run tests normally.")
     parser.add_argument('-r', '--reentrant', action='store_true',
         help="Run reentrant tests with simulated power-loss.")
-    parser.add_argument('--valgrind', action='store_true',
+    parser.add_argument('-V', '--valgrind', action='store_true',
         help="Run non-leaky tests under valgrind to check for memory leaks.")
-    parser.add_argument('--exec', default=[], type=lambda e: e.split(),
+    parser.add_argument('-e', '--exec', default=[], type=lambda e: e.split(' '),
         help="Run tests with another executable prefixed on the command line.")
-    parser.add_argument('--disk',
+    parser.add_argument('-d', '--disk',
         help="Specify a file to use for persistent/reentrant tests.")
-    parser.add_argument('--coverage', type=lambda x: x if x else True,
-        nargs='?', const='',
-        help="Collect coverage information during testing. This uses lcov/gcov \
-            to accumulate coverage information into *.info files. May also \
-            a path to a *.info file to accumulate coverage info into.")
-    parser.add_argument('--build-dir',
-        help="Build relative to the specified directory instead of the \
-            current directory.")
-
     sys.exit(main(**vars(parser.parse_args())))

tests/test_alloc.toml

@@ -9,12 +9,12 @@ code = '''
     const char *names[FILES] = {"bacon", "eggs", "pancakes"};
     lfs_file_t files[FILES];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "breakfast") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int n = 0; n < FILES; n++) {
         sprintf(path, "breakfast/%s", names[n]);
         lfs_file_open(&lfs, &files[n], path,
@@ -31,7 +31,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int n = 0; n < FILES; n++) {
         sprintf(path, "breakfast/%s", names[n]);
         lfs_file_open(&lfs, &file, path, LFS_O_RDONLY) => 0;
@@ -51,13 +51,13 @@ define.SIZE = '(((LFS_BLOCK_SIZE-8)*(LFS_BLOCK_COUNT-6)) / FILES)'
 code = '''
     const char *names[FILES] = {"bacon", "eggs", "pancakes"};
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "breakfast") => 0;
     lfs_unmount(&lfs) => 0;
 
     for (int n = 0; n < FILES; n++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         sprintf(path, "breakfast/%s", names[n]);
         lfs_file_open(&lfs, &file, path,
                 LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
@@ -70,7 +70,7 @@ code = '''
         lfs_unmount(&lfs) => 0;
     }
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int n = 0; n < FILES; n++) {
         sprintf(path, "breakfast/%s", names[n]);
         lfs_file_open(&lfs, &file, path, LFS_O_RDONLY) => 0;
@@ -92,14 +92,14 @@ code = '''
     const char *names[FILES] = {"bacon", "eggs", "pancakes"};
     lfs_file_t files[FILES];
 
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     for (int c = 0; c < CYCLES; c++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_mkdir(&lfs, "breakfast") => 0;
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int n = 0; n < FILES; n++) {
             sprintf(path, "breakfast/%s", names[n]);
             lfs_file_open(&lfs, &files[n], path,
@@ -116,7 +116,7 @@ code = '''
         }
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int n = 0; n < FILES; n++) {
             sprintf(path, "breakfast/%s", names[n]);
             lfs_file_open(&lfs, &file, path, LFS_O_RDONLY) => 0;
@@ -129,7 +129,7 @@ code = '''
         }
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int n = 0; n < FILES; n++) {
             sprintf(path, "breakfast/%s", names[n]);
             lfs_remove(&lfs, path) => 0;
@@ -146,15 +146,15 @@ define.CYCLES = [1, 10]
 code = '''
     const char *names[FILES] = {"bacon", "eggs", "pancakes"};
 
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     for (int c = 0; c < CYCLES; c++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_mkdir(&lfs, "breakfast") => 0;
         lfs_unmount(&lfs) => 0;
 
         for (int n = 0; n < FILES; n++) {
-            lfs_mount(&lfs, &cfg) => 0;
+            lfs_mountcfg(&lfs, &cfg) => 0;
             sprintf(path, "breakfast/%s", names[n]);
             lfs_file_open(&lfs, &file, path,
                     LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
@@ -167,7 +167,7 @@ code = '''
             lfs_unmount(&lfs) => 0;
         }
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int n = 0; n < FILES; n++) {
             sprintf(path, "breakfast/%s", names[n]);
             lfs_file_open(&lfs, &file, path, LFS_O_RDONLY) => 0;
@@ -180,7 +180,7 @@ code = '''
         }
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int n = 0; n < FILES; n++) {
             sprintf(path, "breakfast/%s", names[n]);
             lfs_remove(&lfs, path) => 0;
@@ -192,8 +192,8 @@ code = '''
 
 [[case]] # exhaustion test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "exhaustion", LFS_O_WRONLY | LFS_O_CREAT);
     size = strlen("exhaustion");
     memcpy(buffer, "exhaustion", size);
@@ -216,7 +216,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "exhaustion", LFS_O_RDONLY);
     size = strlen("exhaustion");
     lfs_file_size(&lfs, &file) => size;
@@ -229,8 +229,8 @@ code = '''
 [[case]] # exhaustion wraparound test
 define.SIZE = '(((LFS_BLOCK_SIZE-8)*(LFS_BLOCK_COUNT-4)) / 3)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     lfs_file_open(&lfs, &file, "padding", LFS_O_WRONLY | LFS_O_CREAT);
     size = strlen("buffering");
@@ -263,7 +263,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "exhaustion", LFS_O_RDONLY);
     size = strlen("exhaustion");
     lfs_file_size(&lfs, &file) => size;
@@ -276,8 +276,8 @@ code = '''
 
 [[case]] # dir exhaustion test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // find out max file size
     lfs_mkdir(&lfs, "exhaustiondir") => 0;
@@ -328,8 +328,8 @@ in = "lfs.c"
 define.LFS_ERASE_CYCLES = 0xffffffff
 define.LFS_BADBLOCK_BEHAVIOR = 'LFS_TESTBD_BADBLOCK_READERROR'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     // first fill to exhaustion to find available space
     lfs_file_open(&lfs, &file, "pacman", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     strcpy((char*)buffer, "waka");
@@ -358,11 +358,11 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // remount to force an alloc scan
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // but mark the head of our file as a "bad block", this is force our
     // scan to bail early
-    lfs_testbd_setwear(&cfg, fileblock, 0xffffffff) => 0;
+    lfs_testbd_setwear(&bd, fileblock, 0xffffffff) => 0;
     lfs_file_open(&lfs, &file, "ghost", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     strcpy((char*)buffer, "chomp");
     size = strlen("chomp");
@@ -377,7 +377,7 @@ code = '''
 
     // now reverse the "bad block" and try to write the file again until we
     // run out of space
-    lfs_testbd_setwear(&cfg, fileblock, 0) => 0;
+    lfs_testbd_setwear(&bd, fileblock, 0) => 0;
     lfs_file_open(&lfs, &file, "ghost", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     strcpy((char*)buffer, "chomp");
     size = strlen("chomp");
@@ -393,7 +393,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // check that the disk isn't hurt
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "pacman", LFS_O_RDONLY) => 0;
     strcpy((char*)buffer, "waka");
     size = strlen("waka");
@@ -416,8 +416,8 @@ define.LFS_BLOCK_SIZE = 512
 define.LFS_BLOCK_COUNT = 1024
 if = 'LFS_BLOCK_SIZE == 512 && LFS_BLOCK_COUNT == 1024'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // find out max file size
     lfs_mkdir(&lfs, "exhaustiondir") => 0;
@@ -487,8 +487,8 @@ define.LFS_BLOCK_SIZE = 512
 define.LFS_BLOCK_COUNT = 1024
 if = 'LFS_BLOCK_SIZE == 512 && LFS_BLOCK_COUNT == 1024'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // create one block hole for half a directory
     lfs_file_open(&lfs, &file, "bump", LFS_O_WRONLY | LFS_O_CREAT) => 0;
@@ -510,7 +510,7 @@ code = '''
 
     // remount to force reset of lookahead
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // open hole
     lfs_remove(&lfs, "bump") => 0;
@@ -532,8 +532,8 @@ define.LFS_BLOCK_SIZE = 512
 define.LFS_BLOCK_COUNT = 1024
 if = 'LFS_BLOCK_SIZE == 512 && LFS_BLOCK_COUNT == 1024'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // fill completely with two files
     lfs_file_open(&lfs, &file, "exhaustion1",
@@ -560,7 +560,7 @@ code = '''
 
     // remount to force reset of lookahead
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // rewrite one file
     lfs_file_open(&lfs, &file, "exhaustion1",
@@ -597,8 +597,8 @@ define.LFS_BLOCK_SIZE = 512
 define.LFS_BLOCK_COUNT = 1024
 if = 'LFS_BLOCK_SIZE == 512 && LFS_BLOCK_COUNT == 1024'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // fill completely with two files
     lfs_file_open(&lfs, &file, "exhaustion1",
@@ -625,7 +625,7 @@ code = '''
 
     // remount to force reset of lookahead
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // rewrite one file with a hole of one block
     lfs_file_open(&lfs, &file, "exhaustion1",

tests/test_attrs.toml

@@ -1,14 +1,14 @@
 [[case]] # set/get attribute
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hello") => 0;
     lfs_file_open(&lfs, &file, "hello/hello", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_write(&lfs, &file, "hello", strlen("hello")) => strlen("hello");
     lfs_file_close(&lfs, &file);
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     lfs_setattr(&lfs, "hello", 'A', "aaaa",   4) => 0;
     lfs_setattr(&lfs, "hello", 'B', "bbbbbb", 6) => 0;
@@ -60,7 +60,7 @@ code = '''
 
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     lfs_getattr(&lfs, "hello", 'A', buffer,    4) => 4;
     lfs_getattr(&lfs, "hello", 'B', buffer+4,  9) => 9;
@@ -78,15 +78,15 @@ code = '''
 
 [[case]] # set/get root attribute
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hello") => 0;
     lfs_file_open(&lfs, &file, "hello/hello", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_write(&lfs, &file, "hello", strlen("hello")) => strlen("hello");
     lfs_file_close(&lfs, &file);
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     lfs_setattr(&lfs, "/", 'A', "aaaa",   4) => 0;
     lfs_setattr(&lfs, "/", 'B', "bbbbbb", 6) => 0;
@@ -137,7 +137,7 @@ code = '''
     lfs_getattr(&lfs, "/", 'C', buffer+10, 5) => 5;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     lfs_getattr(&lfs, "/", 'A', buffer,    4) => 4;
     lfs_getattr(&lfs, "/", 'B', buffer+4,  9) => 9;
@@ -155,22 +155,22 @@ code = '''
 
 [[case]] # set/get file attribute
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hello") => 0;
     lfs_file_open(&lfs, &file, "hello/hello", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_write(&lfs, &file, "hello", strlen("hello")) => strlen("hello");
     lfs_file_close(&lfs, &file);
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     struct lfs_attr attrs1[] = {
         {'A', buffer,    4},
         {'B', buffer+4,  6},
         {'C', buffer+10, 5},
     };
-    struct lfs_file_config cfg1 = {.attrs=attrs1, .attr_count=3};
+    struct lfs_file_cfg cfg1 = {.attrs=attrs1, .attr_count=3};
 
     lfs_file_opencfg(&lfs, &file, "hello/hello", LFS_O_WRONLY, &cfg1) => 0;
     memcpy(buffer,    "aaaa",   4);
@@ -228,7 +228,7 @@ code = '''
         {'B', buffer+4,  9},
         {'C', buffer+13, 5},
     };
-    struct lfs_file_config cfg2 = {.attrs=attrs2, .attr_count=3};
+    struct lfs_file_cfg cfg2 = {.attrs=attrs2, .attr_count=3};
     lfs_file_opencfg(&lfs, &file, "hello/hello", LFS_O_RDWR, &cfg2) => 0;
     memcpy(buffer+4,  "fffffffff", 9);
     lfs_file_close(&lfs, &file) => 0;
@@ -238,14 +238,14 @@ code = '''
 
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(buffer, 0, sizeof(buffer));
     struct lfs_attr attrs3[] = {
         {'A', buffer,    4},
         {'B', buffer+4,  9},
         {'C', buffer+13, 5},
     };
-    struct lfs_file_config cfg3 = {.attrs=attrs3, .attr_count=3};
+    struct lfs_file_cfg cfg3 = {.attrs=attrs3, .attr_count=3};
 
     lfs_file_opencfg(&lfs, &file, "hello/hello", LFS_O_RDONLY, &cfg3) => 0;
     lfs_file_close(&lfs, &file) => 0;
@@ -262,15 +262,15 @@ code = '''
 
 [[case]] # deferred file attributes
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hello") => 0;
     lfs_file_open(&lfs, &file, "hello/hello", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_write(&lfs, &file, "hello", strlen("hello")) => strlen("hello");
     lfs_file_close(&lfs, &file);
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_setattr(&lfs, "hello/hello", 'B', "fffffffff",  9) => 0;
     lfs_setattr(&lfs, "hello/hello", 'C', "ccccc",      5) => 0;
 
@@ -280,7 +280,7 @@ code = '''
         {'C', "",     0},
         {'D', "hhhh", 4},
     };
-    struct lfs_file_config cfg1 = {.attrs=attrs1, .attr_count=3};
+    struct lfs_file_cfg cfg1 = {.attrs=attrs1, .attr_count=3};
 
     lfs_file_opencfg(&lfs, &file, "hello/hello", LFS_O_WRONLY, &cfg1) => 0;
 

tests/test_badblocks.toml

@@ -16,12 +16,12 @@ define.NAMEMULT = 64
 define.FILEMULT = 1
 code = '''
     for (lfs_block_t badblock = 2; badblock < LFS_BLOCK_COUNT; badblock++) {
-        lfs_testbd_setwear(&cfg, badblock-1, 0) => 0;
-        lfs_testbd_setwear(&cfg, badblock, 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, badblock-1, 0) => 0;
+        lfs_testbd_setwear(&bd, badblock, 0xffffffff) => 0;
         
-        lfs_format(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int i = 1; i < 10; i++) {
             for (int j = 0; j < NAMEMULT; j++) {
                 buffer[j] = '0'+i;
@@ -46,7 +46,7 @@ code = '''
         }
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (int i = 1; i < 10; i++) {
             for (int j = 0; j < NAMEMULT; j++) {
                 buffer[j] = '0'+i;
@@ -90,12 +90,12 @@ define.NAMEMULT = 64
 define.FILEMULT = 1
 code = '''
     for (lfs_block_t i = 0; i < (LFS_BLOCK_COUNT-2)/2; i++) {
-        lfs_testbd_setwear(&cfg, i+2, 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, i+2, 0xffffffff) => 0;
     }
     
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 1; i < 10; i++) {
         for (int j = 0; j < NAMEMULT; j++) {
             buffer[j] = '0'+i;
@@ -120,7 +120,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 1; i < 10; i++) {
         for (int j = 0; j < NAMEMULT; j++) {
             buffer[j] = '0'+i;
@@ -163,12 +163,12 @@ define.NAMEMULT = 64
 define.FILEMULT = 1
 code = '''
     for (lfs_block_t i = 0; i < (LFS_BLOCK_COUNT-2)/2; i++) {
-        lfs_testbd_setwear(&cfg, (2*i) + 2, 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, (2*i) + 2, 0xffffffff) => 0;
     }
     
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 1; i < 10; i++) {
         for (int j = 0; j < NAMEMULT; j++) {
             buffer[j] = '0'+i;
@@ -193,7 +193,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 1; i < 10; i++) {
         for (int j = 0; j < NAMEMULT; j++) {
             buffer[j] = '0'+i;
@@ -233,9 +233,9 @@ define.LFS_BADBLOCK_BEHAVIOR = [
     'LFS_TESTBD_BADBLOCK_ERASENOOP',
 ]
 code = '''
-    lfs_testbd_setwear(&cfg, 0, 0xffffffff) => 0;
-    lfs_testbd_setwear(&cfg, 1, 0xffffffff) => 0;
+    lfs_testbd_setwear(&bd, 0, 0xffffffff) => 0;
+    lfs_testbd_setwear(&bd, 1, 0xffffffff) => 0;
 
-    lfs_format(&lfs, &cfg) => LFS_ERR_NOSPC;
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_formatcfg(&lfs, &cfg) => LFS_ERR_NOSPC;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''

tests/test_dirs.toml

@@ -1,7 +1,7 @@
 [[case]] # root
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -17,16 +17,16 @@ code = '''
 [[case]] # many directory creation
 define.N = 'range(0, 100, 3)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "dir%03d", i);
         lfs_mkdir(&lfs, path) => 0;
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -48,16 +48,16 @@ code = '''
 [[case]] # many directory removal
 define.N = 'range(3, 100, 11)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "removeme%03d", i);
         lfs_mkdir(&lfs, path) => 0;
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -75,14 +75,14 @@ code = '''
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "removeme%03d", i);
         lfs_remove(&lfs, path) => 0;
     }
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -98,16 +98,16 @@ code = '''
 [[case]] # many directory rename
 define.N = 'range(3, 100, 11)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "test%03d", i);
         lfs_mkdir(&lfs, path) => 0;
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -125,7 +125,7 @@ code = '''
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         char oldpath[128];
         char newpath[128];
@@ -135,7 +135,7 @@ code = '''
     }
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -158,10 +158,10 @@ code = '''
 define.N = [5, 11]
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     for (int i = 0; i < N; i++) {
@@ -237,9 +237,9 @@ code = '''
 [[case]] # file creation
 define.N = 'range(3, 100, 11)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "file%03d", i);
         lfs_file_open(&lfs, &file, path,
@@ -248,7 +248,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -270,9 +270,9 @@ code = '''
 [[case]] # file removal
 define.N = 'range(0, 100, 3)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "removeme%03d", i);
         lfs_file_open(&lfs, &file, path,
@@ -281,7 +281,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -299,14 +299,14 @@ code = '''
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "removeme%03d", i);
         lfs_remove(&lfs, path) => 0;
     }
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -322,9 +322,9 @@ code = '''
 [[case]] # file rename
 define.N = 'range(0, 100, 3)'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "test%03d", i);
         lfs_file_open(&lfs, &file, path,
@@ -333,7 +333,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -351,7 +351,7 @@ code = '''
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         char oldpath[128];
         char newpath[128];
@@ -361,7 +361,7 @@ code = '''
     }
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -384,10 +384,10 @@ code = '''
 define.N = [5, 25]
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     for (int i = 0; i < N; i++) {
@@ -462,21 +462,21 @@ code = '''
 
 [[case]] # nested directories
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "potato") => 0;
     lfs_file_open(&lfs, &file, "burito",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "potato/baked") => 0;
     lfs_mkdir(&lfs, "potato/sweet") => 0;
     lfs_mkdir(&lfs, "potato/fried") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "potato") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -498,21 +498,21 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // try removing?
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "potato") => LFS_ERR_NOTEMPTY;
     lfs_unmount(&lfs) => 0;
 
     // try renaming?
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "potato", "coldpotato") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "coldpotato", "warmpotato") => 0;
     lfs_rename(&lfs, "warmpotato", "hotpotato") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "potato") => LFS_ERR_NOENT;
     lfs_remove(&lfs, "coldpotato") => LFS_ERR_NOENT;
     lfs_remove(&lfs, "warmpotato") => LFS_ERR_NOENT;
@@ -520,7 +520,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // try cross-directory renaming
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "coldpotato") => 0;
     lfs_rename(&lfs, "hotpotato/baked", "coldpotato/baked") => 0;
     lfs_rename(&lfs, "coldpotato", "hotpotato") => LFS_ERR_NOTEMPTY;
@@ -536,7 +536,7 @@ code = '''
     lfs_remove(&lfs, "hotpotato") => LFS_ERR_NOTEMPTY;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "hotpotato") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -558,7 +558,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
     
     // final remove
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "hotpotato") => LFS_ERR_NOTEMPTY;
     lfs_remove(&lfs, "hotpotato/baked") => 0;
     lfs_remove(&lfs, "hotpotato") => LFS_ERR_NOTEMPTY;
@@ -568,7 +568,7 @@ code = '''
     lfs_remove(&lfs, "hotpotato") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -587,8 +587,8 @@ code = '''
 [[case]] # recursive remove
 define.N = [10, 100]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "prickly-pear") => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "prickly-pear/cactus%03d", i);
@@ -611,7 +611,7 @@ code = '''
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs);
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "prickly-pear") => LFS_ERR_NOTEMPTY;
 
     lfs_dir_open(&lfs, &dir, "prickly-pear") => 0;
@@ -636,22 +636,22 @@ code = '''
     lfs_remove(&lfs, "prickly-pear") => LFS_ERR_NOENT;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "prickly-pear") => LFS_ERR_NOENT;
     lfs_unmount(&lfs) => 0;
 '''
 
 [[case]] # other error cases
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "potato") => 0;
     lfs_file_open(&lfs, &file, "burito",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     lfs_mkdir(&lfs, "potato") => LFS_ERR_EXIST;
     lfs_mkdir(&lfs, "burito") => LFS_ERR_EXIST;
@@ -696,7 +696,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // or on disk
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "/") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(info.type == LFS_TYPE_DIR);
@@ -718,8 +718,8 @@ code = '''
 [[case]] # directory seek
 define.COUNT = [4, 128, 132]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hello") => 0;
     for (int i = 0; i < COUNT; i++) {
         sprintf(path, "hello/kitty%03d", i);
@@ -728,7 +728,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     for (int j = 2; j < COUNT; j++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_dir_open(&lfs, &dir, "hello") => 0;
         lfs_dir_read(&lfs, &dir, &info) => 1;
         assert(strcmp(info.name, ".") == 0);
@@ -779,8 +779,8 @@ code = '''
 [[case]] # root seek
 define.COUNT = [4, 128, 132]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < COUNT; i++) {
         sprintf(path, "hi%03d", i);
         lfs_mkdir(&lfs, path) => 0;
@@ -788,7 +788,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     for (int j = 2; j < COUNT; j++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_dir_open(&lfs, &dir, "/") => 0;
         lfs_dir_read(&lfs, &dir, &info) => 1;
         assert(strcmp(info.name, ".") == 0);

tests/test_entries.toml

@@ -10,8 +10,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 20
     sprintf(path, "hi0"); size = 20;
@@ -99,8 +99,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 20
     sprintf(path, "hi0"); size = 20;
@@ -188,8 +188,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 200
     sprintf(path, "hi0"); size = 200;
@@ -261,8 +261,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 200
     sprintf(path, "hi0"); size = 200;
@@ -350,8 +350,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 200
     sprintf(path, "hi0"); size = 200;
@@ -454,8 +454,8 @@ code = '''
     uint8_t wbuffer[1024];
     uint8_t rbuffer[1024];
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // write hi0 200
     sprintf(path, "hi0"); size = 200;
@@ -549,9 +549,9 @@ code = '''
 
 [[case]] # create too big
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(path, 'm', 200);
     path[200] = '\0';
 
@@ -574,9 +574,9 @@ code = '''
 
 [[case]] # resize too big
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     memset(path, 'm', 200);
     path[200] = '\0';
 

tests/test_evil.toml

@@ -9,10 +9,10 @@ define.INVALSET = [0x3, 0x1, 0x2]
 in = "lfs.c"
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // change tail-pointer to invalid pointers
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     lfs_dir_commit(&lfs, &mdir, LFS_MKATTRS(
@@ -23,7 +23,7 @@ code = '''
     lfs_deinit(&lfs) => 0;
 
     // test that mount fails gracefully
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''
 
 [[case]] # invalid dir pointer test
@@ -31,14 +31,14 @@ define.INVALSET = [0x3, 0x1, 0x2]
 in = "lfs.c"
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // make a dir
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "dir_here") => 0;
     lfs_unmount(&lfs) => 0;
 
     // change the dir pointer to be invalid
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     // make sure id 1 == our directory
@@ -57,7 +57,7 @@ code = '''
 
     // test that accessing our bad dir fails, note there's a number
     // of ways to access the dir, some can fail, but some don't
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "dir_here", &info) => 0;
     assert(strcmp(info.name, "dir_here") == 0);
     assert(info.type == LFS_TYPE_DIR);
@@ -77,16 +77,16 @@ in = "lfs.c"
 define.SIZE = [10, 1000, 100000] # faked file size
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // make a file
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "file_here",
             LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
     // change the file pointer to be invalid
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     // make sure id 1 == our file
@@ -103,7 +103,7 @@ code = '''
 
     // test that accessing our bad file fails, note there's a number
     // of ways to access the dir, some can fail, but some don't
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "file_here", &info) => 0;
     assert(strcmp(info.name, "file_here") == 0);
     assert(info.type == LFS_TYPE_REG);
@@ -125,9 +125,9 @@ define.SIZE = ['2*LFS_BLOCK_SIZE', '3*LFS_BLOCK_SIZE', '4*LFS_BLOCK_SIZE']
 in = "lfs.c"
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // make a file
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "file_here",
             LFS_O_WRONLY | LFS_O_CREAT) => 0;
     for (int i = 0; i < SIZE; i++) {
@@ -137,7 +137,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
     // change pointer in CTZ skip-list to be invalid
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     // make sure id 1 == our file and get our CTZ structure
@@ -154,17 +154,17 @@ code = '''
     lfs_ctz_fromle32(&ctz);
     // rewrite block to contain bad pointer
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, ctz.head, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, ctz.head, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     uint32_t bad = lfs_tole32(0xcccccccc);
     memcpy(&bbuffer[0], &bad, sizeof(bad));
     memcpy(&bbuffer[4], &bad, sizeof(bad));
-    cfg.erase(&cfg, ctz.head) => 0;
-    cfg.prog(&cfg, ctz.head, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_erase(&bd, ctz.head) => 0;
+    lfs_testbd_prog(&bd, ctz.head, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     lfs_deinit(&lfs) => 0;
 
     // test that accessing our bad file fails, note there's a number
     // of ways to access the dir, some can fail, but some don't
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "file_here", &info) => 0;
     assert(strcmp(info.name, "file_here") == 0);
     assert(info.type == LFS_TYPE_REG);
@@ -187,10 +187,10 @@ define.INVALSET = [0x3, 0x1, 0x2]
 in = "lfs.c"
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // create an invalid gstate
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     lfs_fs_prepmove(&lfs, 1, (lfs_block_t [2]){
@@ -202,7 +202,7 @@ code = '''
     // test that mount fails gracefully
     // mount may not fail, but our first alloc should fail when
     // we try to fix the gstate
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "should_fail") => LFS_ERR_CORRUPT;
     lfs_unmount(&lfs) => 0;
 '''
@@ -213,10 +213,10 @@ code = '''
 in = "lfs.c"
 code = '''
     // create littlefs
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // change tail-pointer to point to ourself
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
     lfs_dir_commit(&lfs, &mdir, LFS_MKATTRS(
@@ -225,20 +225,20 @@ code = '''
     lfs_deinit(&lfs) => 0;
 
     // test that mount fails gracefully
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''
 
 [[case]] # metadata-pair threaded-list 2-length loop test
 in = "lfs.c"
 code = '''
     // create littlefs with child dir
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "child") => 0;
     lfs_unmount(&lfs) => 0;
 
     // find child
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_block_t pair[2];
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
@@ -255,20 +255,20 @@ code = '''
     lfs_deinit(&lfs) => 0;
 
     // test that mount fails gracefully
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''
 
 [[case]] # metadata-pair threaded-list 1-length child loop test
 in = "lfs.c"
 code = '''
     // create littlefs with child dir
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "child") => 0;
     lfs_unmount(&lfs) => 0;
 
     // find child
-    lfs_init(&lfs, &cfg) => 0;
+    lfs_initcommon(&lfs, &cfg) => 0;
     lfs_mdir_t mdir;
     lfs_block_t pair[2];
     lfs_dir_fetch(&lfs, &mdir, (lfs_block_t[2]){0, 1}) => 0;
@@ -284,5 +284,5 @@ code = '''
     lfs_deinit(&lfs) => 0;
 
     // test that mount fails gracefully
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''

tests/test_exhaustion.toml

@@ -11,14 +11,14 @@ define.LFS_BADBLOCK_BEHAVIOR = [
 ]
 define.FILES = 10
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "roadrunner") => 0;
     lfs_unmount(&lfs) => 0;
 
     uint32_t cycle = 0;
     while (true) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (uint32_t i = 0; i < FILES; i++) {
             // chose name, roughly random seed, and random 2^n size
             sprintf(path, "roadrunner/test%d", i);
@@ -71,7 +71,7 @@ code = '''
 
 exhausted:
     // should still be readable
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (uint32_t i = 0; i < FILES; i++) {
         // check for errors
         sprintf(path, "roadrunner/test%d", i);
@@ -96,11 +96,11 @@ define.LFS_BADBLOCK_BEHAVIOR = [
 ]
 define.FILES = 10
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     uint32_t cycle = 0;
     while (true) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (uint32_t i = 0; i < FILES; i++) {
             // chose name, roughly random seed, and random 2^n size
             sprintf(path, "test%d", i);
@@ -153,7 +153,7 @@ code = '''
 
 exhausted:
     // should still be readable
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (uint32_t i = 0; i < FILES; i++) {
         // check for errors
         sprintf(path, "test%d", i);
@@ -180,18 +180,18 @@ code = '''
 
     for (int run = 0; run < 2; run++) {
         for (lfs_block_t b = 0; b < LFS_BLOCK_COUNT; b++) {
-            lfs_testbd_setwear(&cfg, b,
+            lfs_testbd_setwear(&bd, b,
                     (b < run_block_count[run]) ? 0 : LFS_ERASE_CYCLES) => 0;
         }
 
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_mkdir(&lfs, "roadrunner") => 0;
         lfs_unmount(&lfs) => 0;
 
         uint32_t cycle = 0;
         while (true) {
-            lfs_mount(&lfs, &cfg) => 0;
+            lfs_mountcfg(&lfs, &cfg) => 0;
             for (uint32_t i = 0; i < FILES; i++) {
                 // chose name, roughly random seed, and random 2^n size
                 sprintf(path, "roadrunner/test%d", i);
@@ -244,7 +244,7 @@ code = '''
 
 exhausted:
         // should still be readable
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (uint32_t i = 0; i < FILES; i++) {
             // check for errors
             sprintf(path, "roadrunner/test%d", i);
@@ -272,15 +272,15 @@ code = '''
 
     for (int run = 0; run < 2; run++) {
         for (lfs_block_t b = 0; b < LFS_BLOCK_COUNT; b++) {
-            lfs_testbd_setwear(&cfg, b,
+            lfs_testbd_setwear(&bd, b,
                     (b < run_block_count[run]) ? 0 : LFS_ERASE_CYCLES) => 0;
         }
 
-        lfs_format(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
 
         uint32_t cycle = 0;
         while (true) {
-            lfs_mount(&lfs, &cfg) => 0;
+            lfs_mountcfg(&lfs, &cfg) => 0;
             for (uint32_t i = 0; i < FILES; i++) {
                 // chose name, roughly random seed, and random 2^n size
                 sprintf(path, "test%d", i);
@@ -333,7 +333,7 @@ code = '''
 
 exhausted:
         // should still be readable
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (uint32_t i = 0; i < FILES; i++) {
             // check for errors
             sprintf(path, "test%d", i);
@@ -358,14 +358,14 @@ define.CYCLES = 100
 define.FILES = 10
 if = 'LFS_BLOCK_CYCLES < CYCLES/10'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "roadrunner") => 0;
     lfs_unmount(&lfs) => 0;
 
     uint32_t cycle = 0;
     while (cycle < CYCLES) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         for (uint32_t i = 0; i < FILES; i++) {
             // chose name, roughly random seed, and random 2^n size
             sprintf(path, "roadrunner/test%d", i);
@@ -418,7 +418,7 @@ code = '''
 
 exhausted:
     // should still be readable
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (uint32_t i = 0; i < FILES; i++) {
         // check for errors
         sprintf(path, "roadrunner/test%d", i);
@@ -434,7 +434,7 @@ exhausted:
     lfs_testbd_wear_t maxwear = 0;
     // skip 0 and 1 as superblock movement is intentionally avoided
     for (lfs_block_t b = 2; b < LFS_BLOCK_COUNT; b++) {
-        lfs_testbd_wear_t wear = lfs_testbd_getwear(&cfg, b);
+        lfs_testbd_wear_t wear = lfs_testbd_getwear(&bd, b);
         printf("%08x: wear %d\n", b, wear);
         assert(wear >= 0);
         if (wear < minwear) {
@@ -453,7 +453,7 @@ exhausted:
     // find standard deviation^2
     lfs_testbd_wear_t dev2 = 0;
     for (lfs_block_t b = 2; b < LFS_BLOCK_COUNT; b++) {
-        lfs_testbd_wear_t wear = lfs_testbd_getwear(&cfg, b);
+        lfs_testbd_wear_t wear = lfs_testbd_getwear(&bd, b);
         assert(wear >= 0);
         lfs_testbd_swear_t diff = wear - avgwear;
         dev2 += diff*diff;

tests/test_files.toml

@@ -1,8 +1,8 @@
 
 [[case]] # simple file test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "hello",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     size = strlen("Hello World!")+1;
@@ -11,7 +11,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "hello", LFS_O_RDONLY) => 0;
     lfs_file_read(&lfs, &file, buffer, size) => size;
     assert(strcmp((char*)buffer, "Hello World!") == 0);
@@ -23,10 +23,10 @@ code = '''
 define.SIZE = [32, 8192, 262144, 0, 7, 8193]
 define.CHUNKSIZE = [31, 16, 33, 1, 1023]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // write
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     srand(1);
@@ -41,7 +41,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE;
     srand(1);
@@ -62,10 +62,10 @@ define.SIZE1 = [32, 8192, 131072, 0, 7, 8193]
 define.SIZE2 = [32, 8192, 131072, 0, 7, 8193]
 define.CHUNKSIZE = [31, 16, 1]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // write
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     srand(1);
@@ -80,7 +80,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE1;
     srand(1);
@@ -96,7 +96,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // rewrite
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_WRONLY) => 0;
     srand(2);
     for (lfs_size_t i = 0; i < SIZE2; i += CHUNKSIZE) {
@@ -110,7 +110,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => lfs_max(SIZE1, SIZE2);
     srand(2);
@@ -144,10 +144,10 @@ define.SIZE1 = [32, 8192, 131072, 0, 7, 8193]
 define.SIZE2 = [32, 8192, 131072, 0, 7, 8193]
 define.CHUNKSIZE = [31, 16, 1]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // write
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     srand(1);
@@ -162,7 +162,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE1;
     srand(1);
@@ -178,7 +178,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // append
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_WRONLY | LFS_O_APPEND) => 0;
     srand(2);
     for (lfs_size_t i = 0; i < SIZE2; i += CHUNKSIZE) {
@@ -192,7 +192,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE1 + SIZE2;
     srand(1);
@@ -221,10 +221,10 @@ define.SIZE1 = [32, 8192, 131072, 0, 7, 8193]
 define.SIZE2 = [32, 8192, 131072, 0, 7, 8193]
 define.CHUNKSIZE = [31, 16, 1]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 
     // write
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     srand(1);
@@ -239,7 +239,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE1;
     srand(1);
@@ -255,7 +255,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // truncate
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_WRONLY | LFS_O_TRUNC) => 0;
     srand(2);
     for (lfs_size_t i = 0; i < SIZE2; i += CHUNKSIZE) {
@@ -269,7 +269,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // read
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => SIZE2;
     srand(2);
@@ -290,10 +290,10 @@ define.SIZE = [32, 0, 7, 2049]
 define.CHUNKSIZE = [31, 16, 65]
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     err = lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY);
@@ -344,10 +344,10 @@ define = [
 ]
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     err = lfs_file_open(&lfs, &file, "avacado", LFS_O_RDONLY);
@@ -406,9 +406,9 @@ code = '''
 [[case]] # many files
 define.N = 300
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // create N files of 7 bytes
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "file_%03d", i);
         lfs_file_open(&lfs, &file, path,
@@ -431,9 +431,9 @@ code = '''
 [[case]] # many files with power cycle
 define.N = 300
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // create N files of 7 bytes
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         sprintf(path, "file_%03d", i);
         lfs_file_open(&lfs, &file, path,
@@ -446,7 +446,7 @@ code = '''
         lfs_unmount(&lfs) => 0;
 
         char rbuffer[1024];
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         lfs_file_open(&lfs, &file, path, LFS_O_RDONLY) => 0;
         lfs_file_read(&lfs, &file, rbuffer, size) => size;
         assert(strcmp(rbuffer, wbuffer) == 0);
@@ -459,10 +459,10 @@ code = '''
 define.N = 300
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     // create N files of 7 bytes
     for (int i = 0; i < N; i++) {

tests/test_interspersed.toml

@@ -5,8 +5,8 @@ define.FILES = [4, 10, 26]
 code = '''
     lfs_file_t files[FILES];
     const char alphas[] = "abcdefghijklmnopqrstuvwxyz";
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int j = 0; j < FILES; j++) {
         sprintf(path, "%c", alphas[j]);
         lfs_file_open(&lfs, &files[j], path,
@@ -64,8 +64,8 @@ define.SIZE = [10, 100]
 define.FILES = [4, 10, 26]
 code = '''
     const char alphas[] = "abcdefghijklmnopqrstuvwxyz";
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int j = 0; j < FILES; j++) {
         sprintf(path, "%c", alphas[j]);
         lfs_file_open(&lfs, &file, path,
@@ -77,7 +77,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "zzz", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     for (int j = 0; j < FILES; j++) {
         lfs_file_write(&lfs, &file, (const void*)"~", 1) => 1;
@@ -115,8 +115,8 @@ code = '''
 [[case]] # remove inconveniently test
 define.SIZE = [10, 100]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_t files[3];
     lfs_file_open(&lfs, &files[0], "e", LFS_O_WRONLY | LFS_O_CREAT) => 0;
     lfs_file_open(&lfs, &files[1], "f", LFS_O_WRONLY | LFS_O_CREAT) => 0;
@@ -180,10 +180,10 @@ code = '''
     lfs_file_t files[FILES];
     const char alphas[] = "abcdefghijklmnopqrstuvwxyz";
 
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     for (int j = 0; j < FILES; j++) {

tests/test_move.toml

@@ -1,7 +1,7 @@
 [[case]] # move file
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -13,11 +13,11 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -57,8 +57,8 @@ code = '''
 
 [[case]] # noop move, yes this is legal
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "hi") => 0;
     lfs_rename(&lfs, "hi", "hi") => 0;
     lfs_mkdir(&lfs, "hi/hi") => 0;
@@ -74,8 +74,8 @@ code = '''
 [[case]] # move file corrupt source
 in = "lfs.c"
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -87,28 +87,28 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -150,8 +150,8 @@ code = '''
 in = "lfs.c"
 if = 'LFS_PROG_SIZE <= 0x3fe' # only works with one crc per commit
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -163,44 +163,44 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // corrupt the destination
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "c") => 0;
     block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -242,8 +242,8 @@ code = '''
 in = "lfs.c"
 if = 'LFS_PROG_SIZE <= 0x3fe' # only works with one crc per commit
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -255,49 +255,49 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // corrupt the destination
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "c") => 0;
     block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // continue move
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -338,10 +338,10 @@ code = '''
 [[case]] # simple reentrant move file
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     err = lfs_mkdir(&lfs, "a");
     assert(!err || err == LFS_ERR_EXIST);
@@ -354,7 +354,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     while (true) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         // there should never exist _2_ hello files
         int count = 0;
         if (lfs_stat(&lfs, "a/hello", &info) == 0) {
@@ -384,7 +384,7 @@ code = '''
         assert(count <= 1);
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         if (lfs_stat(&lfs, "a/hello", &info) == 0 && info.size > 0) {
             lfs_rename(&lfs, "a/hello", "b/hello") => 0;
         } else if (lfs_stat(&lfs, "b/hello", &info) == 0) {
@@ -407,7 +407,7 @@ code = '''
         lfs_unmount(&lfs) => 0;
     }
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -447,8 +447,8 @@ code = '''
 
 [[case]] # move dir
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -459,11 +459,11 @@ code = '''
     lfs_mkdir(&lfs, "a/hi/ohayo") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hi", "c/hi") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -513,8 +513,8 @@ code = '''
 [[case]] # move dir corrupt source
 in = "lfs.c"
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -525,28 +525,28 @@ code = '''
     lfs_mkdir(&lfs, "a/hi/ohayo") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hi", "c/hi") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -597,8 +597,8 @@ code = '''
 in = "lfs.c"
 if = 'LFS_PROG_SIZE <= 0x3fe' # only works with one crc per commit
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -609,44 +609,44 @@ code = '''
     lfs_mkdir(&lfs, "a/hi/ohayo") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hi", "c/hi") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // corrupt the destination
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "c") => 0;
     block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -697,8 +697,8 @@ code = '''
 in = "lfs.c"
 if = 'LFS_PROG_SIZE <= 0x3fe' # only works with one crc per commit
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -709,49 +709,49 @@ code = '''
     lfs_mkdir(&lfs, "a/hi/ohayo") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hi", "c/hi") => 0;
     lfs_unmount(&lfs) => 0;
 
     // corrupt the source
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // corrupt the destination
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "c") => 0;
     block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
     // continue move
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hi", "c/hi") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -801,10 +801,10 @@ code = '''
 [[case]] # simple reentrant move dir
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     err = lfs_mkdir(&lfs, "a");
     assert(!err || err == LFS_ERR_EXIST);
@@ -817,7 +817,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     while (true) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         // there should never exist _2_ hi directories
         int count = 0;
         if (lfs_stat(&lfs, "a/hi", &info) == 0) {
@@ -843,7 +843,7 @@ code = '''
         assert(count <= 1);
         lfs_unmount(&lfs) => 0;
 
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         if (lfs_stat(&lfs, "a/hi", &info) == 0) {
             lfs_rename(&lfs, "a/hi", "b/hi") => 0;
         } else if (lfs_stat(&lfs, "b/hi", &info) == 0) {
@@ -868,7 +868,7 @@ code = '''
         lfs_unmount(&lfs) => 0;
     }
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "a") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     assert(strcmp(info.name, ".") == 0);
@@ -917,8 +917,8 @@ code = '''
 
 [[case]] # move state stealing
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "a") => 0;
     lfs_mkdir(&lfs, "b") => 0;
     lfs_mkdir(&lfs, "c") => 0;
@@ -930,17 +930,17 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "a/hello", "b/hello") => 0;
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "b/hello", "c/hello") => 0;
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_rename(&lfs, "c/hello", "d/hello") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "a/hello", LFS_O_RDONLY) => LFS_ERR_NOENT;
     lfs_file_open(&lfs, &file, "b/hello", LFS_O_RDONLY) => LFS_ERR_NOENT;
     lfs_file_open(&lfs, &file, "c/hello", LFS_O_RDONLY) => LFS_ERR_NOENT;
@@ -954,12 +954,12 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_remove(&lfs, "b") => 0;
     lfs_remove(&lfs, "c") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "a", &info) => 0;
     lfs_stat(&lfs, "b", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "c", &info) => LFS_ERR_NOENT;
@@ -981,8 +981,8 @@ code = '''
 # Other specific corner cases
 [[case]] # create + delete in same commit with neighbors
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // littlefs keeps files sorted, so we know the order these will be in
     lfs_file_open(&lfs, &file, "/1.move_me",
@@ -1127,8 +1127,8 @@ code = '''
 # Other specific corner cases
 [[case]] # create + delete + delete in same commit with neighbors
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // littlefs keeps files sorted, so we know the order these will be in
     lfs_file_open(&lfs, &file, "/1.move_me",
@@ -1283,8 +1283,8 @@ code = '''
 
 [[case]] # create + delete in different dirs with neighbors
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     // littlefs keeps files sorted, so we know the order these will be in
     lfs_mkdir(&lfs, "/dir.1") => 0;
@@ -1523,8 +1523,8 @@ in = "lfs.c"
 define.RELOCATIONS = 'range(0x3+1)'
 define.LFS_ERASE_CYCLES = 0xffffffff
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     lfs_mkdir(&lfs, "/parent") => 0;
     lfs_mkdir(&lfs, "/parent/child") => 0;
@@ -1569,14 +1569,14 @@ code = '''
     // force specific directories to relocate
     if (RELOCATIONS & 0x1) {
         lfs_dir_open(&lfs, &dir, "/parent");
-        lfs_testbd_setwear(&cfg, dir.m.pair[0], 0xffffffff) => 0;
-        lfs_testbd_setwear(&cfg, dir.m.pair[1], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[0], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[1], 0xffffffff) => 0;
         lfs_dir_close(&lfs, &dir) => 0;
     }
     if (RELOCATIONS & 0x2) {
         lfs_dir_open(&lfs, &dir, "/parent/child");
-        lfs_testbd_setwear(&cfg, dir.m.pair[0], 0xffffffff) => 0;
-        lfs_testbd_setwear(&cfg, dir.m.pair[1], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[0], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[1], 0xffffffff) => 0;
         lfs_dir_close(&lfs, &dir) => 0;
     }
 
@@ -1660,8 +1660,8 @@ in = "lfs.c"
 define.RELOCATIONS = 'range(0x7+1)'
 define.LFS_ERASE_CYCLES = 0xffffffff
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     lfs_mkdir(&lfs, "/parent") => 0;
     lfs_mkdir(&lfs, "/parent/child") => 0;
@@ -1707,20 +1707,20 @@ code = '''
     // force specific directories to relocate
     if (RELOCATIONS & 0x1) {
         lfs_dir_open(&lfs, &dir, "/parent");
-        lfs_testbd_setwear(&cfg, dir.m.pair[0], 0xffffffff) => 0;
-        lfs_testbd_setwear(&cfg, dir.m.pair[1], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[0], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[1], 0xffffffff) => 0;
         lfs_dir_close(&lfs, &dir) => 0;
     }
     if (RELOCATIONS & 0x2) {
         lfs_dir_open(&lfs, &dir, "/parent/sibling");
-        lfs_testbd_setwear(&cfg, dir.m.pair[0], 0xffffffff) => 0;
-        lfs_testbd_setwear(&cfg, dir.m.pair[1], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[0], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[1], 0xffffffff) => 0;
         lfs_dir_close(&lfs, &dir) => 0;
     }
     if (RELOCATIONS & 0x4) {
         lfs_dir_open(&lfs, &dir, "/parent/child");
-        lfs_testbd_setwear(&cfg, dir.m.pair[0], 0xffffffff) => 0;
-        lfs_testbd_setwear(&cfg, dir.m.pair[1], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[0], 0xffffffff) => 0;
+        lfs_testbd_setwear(&bd, dir.m.pair[1], 0xffffffff) => 0;
         lfs_dir_close(&lfs, &dir) => 0;
     }
 

tests/test_orphans.toml

@@ -2,8 +2,8 @@
 in = "lfs.c"
 if = 'LFS_PROG_SIZE <= 0x3fe' # only works with one crc per commit
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "parent") => 0;
     lfs_mkdir(&lfs, "parent/orphan") => 0;
     lfs_mkdir(&lfs, "parent/child") => 0;
@@ -13,29 +13,29 @@ code = '''
     // corrupt the child's most recent commit, this should be the update
     // to the linked-list entry, which should orphan the orphan. Note this
     // makes a lot of assumptions about the remove operation.
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "parent/child") => 0;
     lfs_block_t block = dir.m.pair[0];
     lfs_dir_close(&lfs, &dir) => 0;
     lfs_unmount(&lfs) => 0;
     uint8_t bbuffer[LFS_BLOCK_SIZE];
-    cfg.read(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_read(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
     int off = LFS_BLOCK_SIZE-1;
     while (off >= 0 && bbuffer[off] == LFS_ERASE_VALUE) {
         off -= 1;
     }
     memset(&bbuffer[off-3], LFS_BLOCK_SIZE, 3);
-    cfg.erase(&cfg, block) => 0;
-    cfg.prog(&cfg, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
-    cfg.sync(&cfg) => 0;
+    lfs_testbd_erase(&bd, block) => 0;
+    lfs_testbd_prog(&bd, block, 0, bbuffer, LFS_BLOCK_SIZE) => 0;
+    lfs_testbd_sync(&bd) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "parent/orphan", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "parent/child", &info) => 0;
     lfs_fs_size(&lfs) => 8;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "parent/orphan", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "parent/child", &info) => 0;
     lfs_fs_size(&lfs) => 8;
@@ -48,7 +48,7 @@ code = '''
     lfs_fs_size(&lfs) => 8;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "parent/orphan", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "parent/child", &info) => 0;
     lfs_stat(&lfs, "parent/otherchild", &info) => 0;
@@ -66,10 +66,10 @@ define = [
     {FILES=3,  DEPTH=3, CYCLES=20},
 ]
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     srand(1);

tests/test_paths.toml

@@ -1,8 +1,8 @@
 
 [[case]] # simple path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -23,8 +23,8 @@ code = '''
 
 [[case]] # redundant slashes
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -47,8 +47,8 @@ code = '''
 
 [[case]] # dot path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -73,8 +73,8 @@ code = '''
 
 [[case]] # dot dot path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -103,8 +103,8 @@ code = '''
 
 [[case]] # trailing dot path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -125,8 +125,8 @@ code = '''
 
 [[case]] # leading dot path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, ".milk") => 0;
     lfs_stat(&lfs, ".milk", &info) => 0;
     strcmp(info.name, ".milk") => 0;
@@ -137,8 +137,8 @@ code = '''
 
 [[case]] # root dot dot path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "tea") => 0;
     lfs_mkdir(&lfs, "tea/hottea") => 0;
     lfs_mkdir(&lfs, "tea/warmtea") => 0;
@@ -161,8 +161,8 @@ code = '''
 
 [[case]] # invalid path tests
 code = '''
-    lfs_format(&lfs, &cfg);
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg);
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "dirt", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "dirt/ground", &info) => LFS_ERR_NOENT;
     lfs_stat(&lfs, "dirt/ground/earth", &info) => LFS_ERR_NOENT;
@@ -182,8 +182,8 @@ code = '''
 
 [[case]] # root operations
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "/", &info) => 0;
     assert(strcmp(info.name, "/") == 0);
     assert(info.type == LFS_TYPE_DIR);
@@ -198,8 +198,8 @@ code = '''
 
 [[case]] # root representations
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "/", &info) => 0;
     assert(strcmp(info.name, "/") == 0);
     assert(info.type == LFS_TYPE_DIR);
@@ -223,8 +223,8 @@ code = '''
 
 [[case]] # superblock conflict test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "littlefs", &info) => LFS_ERR_NOENT;
     lfs_remove(&lfs, "littlefs") => LFS_ERR_NOENT;
 
@@ -239,8 +239,8 @@ code = '''
 
 [[case]] # max path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "coffee") => 0;
     lfs_mkdir(&lfs, "coffee/hotcoffee") => 0;
     lfs_mkdir(&lfs, "coffee/warmcoffee") => 0;
@@ -263,8 +263,8 @@ code = '''
 
 [[case]] # really big path test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_mkdir(&lfs, "coffee") => 0;
     lfs_mkdir(&lfs, "coffee/hotcoffee") => 0;
     lfs_mkdir(&lfs, "coffee/warmcoffee") => 0;

tests/test_relocations.toml

@@ -4,9 +4,9 @@ define.ITERATIONS = 20
 define.COUNT = 10
 define.LFS_BLOCK_CYCLES = [8, 1]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // fill up filesystem so only ~16 blocks are left
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "padding", LFS_O_CREAT | LFS_O_WRONLY) => 0;
     memset(buffer, 0, 512);
     while (LFS_BLOCK_COUNT - lfs_fs_size(&lfs) > 16) {
@@ -17,7 +17,7 @@ code = '''
     lfs_mkdir(&lfs, "child") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int j = 0; j < ITERATIONS; j++) {
         for (int i = 0; i < COUNT; i++) {
             sprintf(path, "child/test%03d_loooooooooooooooooong_name", i);
@@ -47,7 +47,7 @@ code = '''
     }
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_dir_open(&lfs, &dir, "child") => 0;
     lfs_dir_read(&lfs, &dir, &info) => 1;
     lfs_dir_read(&lfs, &dir, &info) => 1;
@@ -70,9 +70,9 @@ define.ITERATIONS = 20
 define.COUNT = 10
 define.LFS_BLOCK_CYCLES = [8, 1]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     // fill up filesystem so only ~16 blocks are left
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "padding", LFS_O_CREAT | LFS_O_WRONLY) => 0;
     memset(buffer, 0, 512);
     while (LFS_BLOCK_COUNT - lfs_fs_size(&lfs) > 16) {
@@ -83,7 +83,7 @@ code = '''
     lfs_mkdir(&lfs, "child") => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int j = 0; j < ITERATIONS; j++) {
         for (int i = 0; i < COUNT; i++) {
             sprintf(path, "child/test%03d_loooooooooooooooooong_name", i);
@@ -155,10 +155,10 @@ define = [
     {FILES=3,  DEPTH=3, CYCLES=20, LFS_BLOCK_CYCLES=1},
 ]
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     srand(1);
@@ -217,10 +217,10 @@ define = [
     {FILES=3,  DEPTH=3, CYCLES=20, LFS_BLOCK_CYCLES=1},
 ]
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     srand(1);

tests/test_seek.toml

@@ -9,8 +9,8 @@ define = [
     {COUNT=4,   SKIP=2},
 ]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
     size = strlen("kittycatcat");
@@ -21,7 +21,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty", LFS_O_RDONLY) => 0;
 
     lfs_soff_t pos = -1;
@@ -78,8 +78,8 @@ define = [
     {COUNT=4,   SKIP=2},
 ]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
     size = strlen("kittycatcat");
@@ -90,7 +90,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty", LFS_O_RDWR) => 0;
 
     lfs_soff_t pos = -1;
@@ -133,8 +133,8 @@ code = '''
 define.COUNT = 132
 define.OFFSETS = '"{512, 1020, 513, 1021, 511, 1019, 1441}"'
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
     size = strlen("kittycatcat");
@@ -145,7 +145,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty", LFS_O_RDWR) => 0;
 
     size = strlen("hedgehoghog");
@@ -193,8 +193,8 @@ define = [
     {COUNT=4,   SKIP=3},
 ]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_APPEND) => 0;
     size = strlen("kittycatcat");
@@ -204,7 +204,7 @@ code = '''
     }
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "kitty", LFS_O_RDWR) => 0;
 
     size = strlen("kittycatcat");
@@ -241,8 +241,8 @@ code = '''
 [[case]] # inline write and seek
 define.SIZE = [2, 4, 128, 132]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "tinykitty",
             LFS_O_RDWR | LFS_O_CREAT) => 0;
     int j = 0;
@@ -310,10 +310,10 @@ code = '''
 define.COUNT = [4, 64, 128]
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     err = lfs_file_open(&lfs, &file, "kitty", LFS_O_RDONLY);
     assert(!err || err == LFS_ERR_NOENT);

tests/test_superblocks.toml

@@ -1,37 +1,37 @@
 [[case]] # simple formatting test
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
 '''
 
 [[case]] # mount/unmount
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_unmount(&lfs) => 0;
 '''
 
 [[case]] # reentrant format
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     lfs_unmount(&lfs) => 0;
 '''
 
 [[case]] # invalid mount
 code = '''
-    lfs_mount(&lfs, &cfg) => LFS_ERR_CORRUPT;
+    lfs_mountcfg(&lfs, &cfg) => LFS_ERR_CORRUPT;
 '''
 
 [[case]] # expanding superblock
 define.LFS_BLOCK_CYCLES = [32, 33, 1]
 define.N = [10, 100, 1000]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
         lfs_file_open(&lfs, &file, "dummy",
                 LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
@@ -44,7 +44,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // one last check after power-cycle
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "dummy",
             LFS_O_WRONLY | LFS_O_CREAT | LFS_O_EXCL) => 0;
     lfs_file_close(&lfs, &file) => 0;
@@ -58,9 +58,9 @@ code = '''
 define.LFS_BLOCK_CYCLES = [32, 33, 1]
 define.N = [10, 100, 1000]
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
     for (int i = 0; i < N; i++) {
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
         // remove lingering dummy?
         err = lfs_stat(&lfs, "dummy", &info);
         assert(err == 0 || (err == LFS_ERR_NOENT && i == 0));
@@ -80,7 +80,7 @@ code = '''
     }
 
     // one last check after power-cycle
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "dummy", &info) => 0;
     assert(strcmp(info.name, "dummy") == 0);
     assert(info.type == LFS_TYPE_REG);
@@ -92,10 +92,10 @@ define.LFS_BLOCK_CYCLES = [2, 1]
 define.N = 24
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
 
     for (int i = 0; i < N; i++) {
@@ -119,7 +119,7 @@ code = '''
     lfs_unmount(&lfs) => 0;
 
     // one last check after power-cycle
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_stat(&lfs, "dummy", &info) => 0;
     assert(strcmp(info.name, "dummy") == 0);
     assert(info.type == LFS_TYPE_REG);

tests/test_truncate.toml

@@ -2,8 +2,8 @@
 define.MEDIUMSIZE = [32, 2048]
 define.LARGESIZE = 8192
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldynoop",
             LFS_O_WRONLY | LFS_O_CREAT) => 0;
 
@@ -17,7 +17,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
     
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldynoop", LFS_O_RDWR) => 0;
     lfs_file_size(&lfs, &file) => LARGESIZE;
 
@@ -27,7 +27,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldynoop", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => MEDIUMSIZE;
 
@@ -46,8 +46,8 @@ code = '''
 define.MEDIUMSIZE = [32, 2048]
 define.LARGESIZE = 8192
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldyread",
             LFS_O_WRONLY | LFS_O_CREAT) => 0;
 
@@ -61,7 +61,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldyread", LFS_O_RDWR) => 0;
     lfs_file_size(&lfs, &file) => LARGESIZE;
 
@@ -78,7 +78,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldyread", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => MEDIUMSIZE;
 
@@ -95,12 +95,12 @@ code = '''
 
 [[case]] # write, truncate, and read
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "sequence",
             LFS_O_RDWR | LFS_O_CREAT | LFS_O_TRUNC) => 0;
 
-    size = lfs_min(lfs.cfg->cache_size, sizeof(buffer)/2);
+    size = lfs_min(lfs.cfg.cache_size, sizeof(buffer)/2);
     lfs_size_t qsize = size / 4;
     uint8_t *wb = buffer;
     uint8_t *rb = buffer + size;
@@ -149,8 +149,8 @@ code = '''
 define.MEDIUMSIZE = [32, 2048]
 define.LARGESIZE = 8192
 code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldywrite",
             LFS_O_WRONLY | LFS_O_CREAT) => 0;
 
@@ -164,7 +164,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldywrite", LFS_O_RDWR) => 0;
     lfs_file_size(&lfs, &file) => LARGESIZE;
 
@@ -181,7 +181,7 @@ code = '''
     lfs_file_close(&lfs, &file) => 0;
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
     lfs_file_open(&lfs, &file, "baldywrite", LFS_O_RDONLY) => 0;
     lfs_file_size(&lfs, &file) => MEDIUMSIZE;
 
@@ -202,10 +202,10 @@ define.MEDIUMSIZE = [32, 1024]
 define.LARGESIZE = 2048
 reentrant = true
 code = '''
-    err = lfs_mount(&lfs, &cfg);
+    err = lfs_mountcfg(&lfs, &cfg);
     if (err) {
-        lfs_format(&lfs, &cfg) => 0;
-        lfs_mount(&lfs, &cfg) => 0;
+        lfs_formatcfg(&lfs, &cfg) => 0;
+        lfs_mountcfg(&lfs, &cfg) => 0;
     }
     err = lfs_file_open(&lfs, &file, "baldy", LFS_O_RDONLY);
     assert(!err || err == LFS_ERR_NOENT);
@@ -312,8 +312,8 @@ code = '''
     const lfs_off_t *hotsizes   = configs[CONFIG].hotsizes;
     const lfs_off_t *coldsizes  = configs[CONFIG].coldsizes;
 
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_formatcfg(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     for (unsigned i = 0; i < COUNT; i++) {
         sprintf(path, "hairyhead%d", i);
@@ -340,7 +340,7 @@ code = '''
 
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     for (unsigned i = 0; i < COUNT; i++) {
         sprintf(path, "hairyhead%d", i);
@@ -367,7 +367,7 @@ code = '''
 
     lfs_unmount(&lfs) => 0;
 
-    lfs_mount(&lfs, &cfg) => 0;
+    lfs_mountcfg(&lfs, &cfg) => 0;
 
     for (unsigned i = 0; i < COUNT; i++) {
         sprintf(path, "hairyhead%d", i);
@@ -392,48 +392,3 @@ code = '''
 
     lfs_unmount(&lfs) => 0;
 '''
-
-[[case]] # noop truncate
-define.MEDIUMSIZE = [32, 2048]
-code = '''
-    lfs_format(&lfs, &cfg) => 0;
-    lfs_mount(&lfs, &cfg) => 0;
-    lfs_file_open(&lfs, &file, "baldynoop",
-            LFS_O_RDWR | LFS_O_CREAT) => 0;
-
-    strcpy((char*)buffer, "hair");
-    size = strlen((char*)buffer);
-    for (lfs_off_t j = 0; j < MEDIUMSIZE; j += size) {
-        lfs_file_write(&lfs, &file, buffer, size) => size;
-
-        // this truncate should do nothing
-        lfs_file_truncate(&lfs, &file, j+size) => 0;
-    }
-    lfs_file_size(&lfs, &file) => MEDIUMSIZE;
-
-    lfs_file_seek(&lfs, &file, 0, LFS_SEEK_SET) => 0;
-    // should do nothing again
-    lfs_file_truncate(&lfs, &file, MEDIUMSIZE) => 0;
-    lfs_file_size(&lfs, &file) => MEDIUMSIZE;
-
-    for (lfs_off_t j = 0; j < MEDIUMSIZE; j += size) {
-        lfs_file_read(&lfs, &file, buffer, size) => size;
-        memcmp(buffer, "hair", size) => 0;
-    }
-    lfs_file_read(&lfs, &file, buffer, size) => 0;
-
-    lfs_file_close(&lfs, &file) => 0;
-    lfs_unmount(&lfs) => 0;
-
-    // still there after reboot?
-    lfs_mount(&lfs, &cfg) => 0;
-    lfs_file_open(&lfs, &file, "baldynoop", LFS_O_RDWR) => 0;
-    lfs_file_size(&lfs, &file) => MEDIUMSIZE;
-    for (lfs_off_t j = 0; j < MEDIUMSIZE; j += size) {
-        lfs_file_read(&lfs, &file, buffer, size) => size;
-        memcmp(buffer, "hair", size) => 0;
-    }
-    lfs_file_read(&lfs, &file, buffer, size) => 0;
-    lfs_file_close(&lfs, &file) => 0;
-    lfs_unmount(&lfs) => 0;
-'''